• There are no items in your cart

NF EN 50155 : 2007

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK
Superseded date

08-19-2019

Published date

01-12-2013

1 Généralités
   1.1 Domaine d'application
   1.2 Références normatives
   1.3 Définitions
2 Conditions générales d'environnement en fonctionnement
   2.1 Conditions normales de service
   2.2 Conditions spéciales de service
3 Conditions générales électriques
   3.1 Alimentation
   3.2 Surtension d'alimentation
   3.3 Installation
   3.4 Transitoires et décharge électrostatique
   3.5 Compatibilité électromagnétique
4 Fiabilité, maintenabilité et durée de vie
   4.1 Fiabilité de l'équipement
   4.2 Durée de vie
   4.3 Maintenabilité
   4.4 Niveaux de maintenance
   4.5 Diagnostics intégrés
   4.6 Equipement d'essai automatique
   4.7 Autres méthodes de diagnostics de pannes
   4.8 Equipements spécifiques pour essai et outillages
        spéciaux
5 Conception
   5.1 Généralités
   5.2 Règles détaillées - Matériel
   5.3 Règles détaillées - Logiciel
   5.4 Caractéristiques de l'équipement
6 Composants
   6.1 Approvisionnement
   6.2 Application
7 Construction
   7.1 Construction des équipements
   7.2 Montage des composants
   7.3 Connexions électriques
   7.4 Câblage interne souple (électrique ou optique)
   7.5 Câblage imprimé souple
   7.6 Cartes imprimées flexibles et rigides
   7.7 Vernis de protection pour cartes imprimées équipées
   7.8 Identification
   7.9 Montage
   7.10 Refroidissement et ventilation
   7.11 Matériaux et produits de finition
8 Sécurité
   8.1 Généralités
   8.2 Sécurité de fonctionnement
   8.3 Sécurité du personnel
9 Documentation
   9.1 Fourniture et archivage de la documentation
   9.2 Documentation relative au matériel et au logiciel
   9.3 Exigences sur la documentation
10 Essais
   10.1 Catégories d'essais
   10.2 Liste des essais
Tableaux
1 Température ambiante
2 Liste des essais
Figures
1 Système d'interface avec les zones d'EMC typiques A, B et C
2 Surtension d'alimentation
3 Variante d'essai de surtension d'alimentation
4 Essai de transitoire par décharge de condensateur
Annexe A (informative) Liste des paragraphes dans lesquels
                       un accord entre les parties (par
                       exemple utilisateur et constructeur)
                       est mentionné
Annexe B (informative) Bibliographie

Applicable to all electronic equipment for control, regulation, protection, supply, etc., installed on rail vehicles and associated with either the accumulator battery of the vehicle or a low voltage power supply source with or without a direct connection to the contact system (transformer, potentiometer device, auxiliary supply).

DevelopmentNote
Indice de classement: F67-155PR. PR NF EN 50155 January 2000. (09/2001) PR NF EN 50155 December 2006. (12/2006) PR NF EN 50155 April 2016. (05/2016)
DocumentType
Standard
PublisherName
Association Francaise de Normalisation
Status
Superseded
SupersededBy

Standards Relationship
NBN EN 50155 : 2007 Identical
NEN EN 50155 : 2017 Identical
IEC 60571:2012 Identical
I.S. EN 50155:2007 Identical
BS EN 50155:2017 Identical
UNE-EN 50155:2007 Identical
EN 50155:2017 Identical
I.S. EN 50155:2017-11 Identical
SN EN 50155 : 2017 Identical
DIN EN 50155 : 2018 Identical

NF EN 50129 : 2003 RAILWAY APPLICATIONS - COMMUNICATION, SIGNALING AND PROCESSING SYSTEMS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALING
NF EN 50463 : 2008 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS
NF EN 50311 : 2003 RAILWAY APPLICATIONS - ROLLING STOCK - D.C. SUPPLIED ELECTRONIC BALLASTS FOR LIGHTING FLUORESCENT LAMPS

NF EN ISO 9002 : 1994 SYSTEMES QUALITE - MODELE POUR L'ASSURANCE DE LA QUALITE EN PRODUCTION, INSTALLATION ET PRESTATIONS ASSOCIEES
NF EN 60352-1 : 1998 SOLDERLESS CONNECTIONS - PART 1: WRAPPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
IEC 61373:2010 Railway applications - Rolling stock equipment - Shock and vibration tests
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
NF EN 61249-2-7 : 2002 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-7: REINFORCED BASE MATERIALS CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
IEC 61249-2-7:2002 Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced base materials clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad
NF EN 61000-4-4 : 2013 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
NF EN 50125-1 : 2014 RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 1: ROLLING STOCK AND ON-BOARD EQUIPMENT
NF EN 60249 2-15 : 1995 BASE MATERIALS FOR PRINTED CIRCUITS - PART 2: SPECIFICATIONS - SPECIFICATION NO 15: FLEXIBLE COPPER-CLAD POLYAMIDE FILM, OF DEFINED FLAMMABILITY
NF EN 60068-2-2 : 2007 ENVIRONMENTAL TESTING - PART 2-2: TESTS - TESTS B: DRY HEAT
IEC 60077:1968 Rules for electric traction equipment
NF EN 60529 : 92 AMD 2 2014 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE)
NF EN 50126 : 2000 RAILWAYS APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS)
IEC 60352-1:1997 Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance
NF EN 60068-2-1 : 2007 ENVIRONMENTAL TESTING - PART 2-1: TESTS - TESTS A: COLD
NF EN 50128 : 2011 RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SOFTWARE FOR RAILWAY CONTROL AND PROTECTION SYSTEMS
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60249-2-15:1987 Base materials for printed circuits. Part 2: Specifications. Specification No. 15: Flexible copper-clad polyimide film, of defined flammability
IEC 60068-2-2a:1976 Supplement A - Basic environmental testing procedures - Part 2: Tests - Tests B: Dry heat
IEC 61249-2-10:2003 Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
IEC 60352-2:2006+AMD1:2013 CSV Solderless connections - Part 2: Crimped connections - Generalrequirements, test methods and practical guidance
NF EN 50207 : 2004 RAILWAY APPLICATIONS - ELECTRONIC POWER CONVERTERS FOR ROLLING STOCK
NF EN 60068 2-30 : 2006 ENVIRONMENTAL TESTING - PART 2-30: TESTS - TEST DB AND GUIDANCE: DAMP HEAT, CYCLIC (12 H + 12 H CYCLE)
IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
NF EN 50163 : 2005 AMD 1 2007 RAILWAY APPLICATIONS - SUPPLY VOLTAGES OF TRACTION SYSTEMS
NF EN ISO 9001 : 2015 QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS
NF EN 61373 : 2011 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS
NF EN 60352-2 : 2006 AMD 1 2014 SOLDERLESS CONNECTIONS - PART 2: CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
NF EN 61249-2-10 : 2003 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-10: REINFORCED BASE MATERIALS CLAD AND UNCLAD - CYANATE ESTER, BROMINATED EPOXIDE, MODIFIED OR UNMODIFIED, WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
NF EN ISO 9000-3 : 1999 QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 3: GUIDELINES FOR THE APPLICATION OF ISO 9001: 1994 TO THE DEVELOPMENT, SUPPLY, INSTALLATION AND MAINTENANCE OF COMPUTER SOFTWARE
IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.