• There are no items in your cart

NF EN 50174-2 : 2009 AMD 1 2011

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
Superseded date

08-21-2019

Published date

01-12-2013

Introduction
1 Domaine d'application et conformité
  1.1 Domaine d'application
  1.2 Conformité
2 Références normatives
3 Termes, définitions et abréviations
  3.1 Termes et définitions
  3.2 Abréviations
4 Exigences relatives à la planification d'installations
  du câblage dédié aux technologies de
  l'information
  4.1 Sécurité
  4.2 Documentation
  4.3 Chemins de câbles
  4.4 Systèmes de chemins de câbles
  4.5 Systèmes de gestion des câbles
  4.6 Enveloppes
  4.7 Câblage
5 Exigences pour l'installation du câblage dédié aux
  technologies de l'information
  5.1 Sécurité
  5.2 Documentation
  5.3 Pratiques d'installation
  5.4 Dispositifs de protection contre les surtensions
  5.5 Étiquettes
  5.6 Essais
  5.7 Acceptation contractuelle
6 Séparation du câblage métallique dédié aux technologies
  de l'information et du câblage de l'alimentation
  électrique
  6.1 Généralités
  6.2 Exigences
  6.3 Recommandations
7 Systèmes de distribution de l'énergie électrique et
  protection contre la foudre
  7.1 Systèmes de distribution de l'énergie électrique
  7.2 Protection contre la foudre et les surtensions
      induites
8 Bâtiments du secteur tertiaire (bureaux)
  8.1 Généralités
  8.2 Présentation générale de la conception du câblage
      pour des locaux commerciaux (bureaux)
  8.3 Exigences de planification d'installations de câblage
      dédié aux technologies de l'information
  8.4 Exigences pour les installateurs de câblage dédié
      aux technologies de l'information
  8.5 Séparation du câblage métallique dédié aux technologies
      de l'information et du câblage de l'alimentation
      électrique
9 Bâtiments du secteur industriel
  9.1 Généralités
  9.2 Aperçu de la conception du câblage de bâtiments
      du secteur industriel
  9.3 Exigences de planification d'installations de
      câblage dédié aux technologies de l'information
  9.4 Exigences pour les installateurs de câblage
      des technologies de l'information
  9.5 Séparation du câblage métallique des technologies
      de l'information et du câblage de l'alimentation
      électrique
Annexe A (informative) - CEM et protection
Annexe B (informative) - Attribution des responsabilités
Bibliographie

Describes the basic requirements for the planning, implementation and operation of information technology cabling using balanced copper cabling and optical fibre cabling. Also applies cabling systems designed and intended to support a wide range of telecommunications services and to support particular analogue and digital telecommunications services including voice services.

DevelopmentNote
Indice de classement: C90-480-2. Supersedes UTEC 90 480-2. PR NF EN 50174-2 April 2001. (05/2001) PR NF EN 50174-2 October 2007. (10/2007)
DocumentType
Standard
PublisherName
Association Francaise de Normalisation
Status
Superseded
Supersedes

UTEC 15 960 : 2009 INSPECTION OF COMMUNICATION NETWORKS IN RESIDENTIAL AREA
NF EN 50090-9-1 : 2004 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 9-1: INSTALLATION REQUIREMENTS - GENERIC CABLING FOR HBES CLASS 1 TWISTED PAIR
XP C93 531-17 : 2016 XP INDOOR COMMUNICATION CABLE - PART 17: SCREENED CABLES FOR RADIOFREQUENCY TELEVISION APPLICATIONS INCLUDING SATELLITE INTERMEDIATE BAND (DVB-S/S2) - CLASS 3 TV
XP C93 531-16 : 2016 XP INDOOR COMMUNICATION CABLE - PART 16: SCREENED CABLES FOR RADIOFREQUENCY TELEVISION APPLICATIONS INCLUDING SATELLITE INTERMEDIATE BAND (DVB-S/S2) - CLASS 2 TV
UTEC 90 483 : 2007 RESIDENTIAL CABLING OF COMMUNICATION NETWORKS
XP C90 483 : 2016 XP THD READY RESIDENTIAL CABLING SYSTEMS OF COMMUNICATION NETWORKS
UTEC 15 900 : 2006 ERECTION AND COEXISTENCE OF POWER AND COMMUNICATION NETWORKS IN RESIDENTIAL, TERTIARY AND ANALOG BUILDINGS
NF EN 50174-1 : 2009 AMD 1 2011 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: INSTALLATION SPECIFICATION AND QUALITY ASSURANCE
NF EN 50173-3 : 2007 AMD 1 2011 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 3: INDUSTRIAL PREMISES

IEC 61537:2006 Cable management - Cable tray systems and cable ladder systems
NF EN 50174-1 : 2009 AMD 1 2011 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: INSTALLATION SPECIFICATION AND QUALITY ASSURANCE
IEC TR 61000-5-3:1999 Electromagnetic compatibility (EMC) - Part 5-3: Installation and mitigation guidelines - HEMP protection concepts
IEC 60364-5-54:2011 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
NF EN 61537 : 2007 CABLE MANAGEMENT - CABLE TRAY SYSTEMS AND CABLE LADDER SYSTEMS
NF EN 61000-6-3 : 2007 AMD 1 2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
IEC 61000-6-4:2006+AMD1:2010 CSV ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
NF EN 60079-17 : 2014 EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE
NF EN 61000-6-4 : 2007 AMD 1 2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
IEC 61784-1:2014 Industrial communication networks - Profiles - Part 1: Fieldbus profiles
IEC 60050-195:1998 International Electrotechnical Vocabulary (IEV) - Part 195: Earthing and protection against electric shock
IEC 60950:1999 Safety of information technology equipment
NF EN 61558-1 : 2006 AMD 1 2009 SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
IEC 60364-4-41:2005+AMD1:2017 CSV Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
IEC 60079-17:2013 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
NF EN 61000-6-2 : 2006 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS
NFC 01 826 : 2004 ELECTROTECHNICAL VOCABULARY - CHAPTER 826 - ELECTRICAL INSTALLATIONS OF BUILDINGS
IEC 60364-5-53:2001+AMD1:2002+AMD2:2015 CSV Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control
IEC 61000-6-1 : 3.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
NF EN 50174-3 : 2014 AMD 1 2017 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
NF EN 50173-1 : 2017 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
NF EN 50085-1 : 2005 AMD 1 2013 CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
NF EN 60529 : 92 AMD 2 2014 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE)
IEC 60364-1:2005 Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
IEC 60332-1-2:2004+AMD1:2015 CSV Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for 1 kW pre-mixed flame
NF EN 50173-4 : 2010 AMD 2 2013 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES
NF EN 61784-1 : APR 2015 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 1: FIELDBUS PROFILES
NF EN 50173-3 : 2007 AMD 1 2011 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 3: INDUSTRIAL PREMISES
NF EN 61386-1 : 2008 CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 1: GENERAL REQUIREMENTS
IEC 61000-6-3:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
NF EN 60332-1-2 : 2005 AMD 11 2017 TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-2: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR 1 KW PRE-MIXED FLAME
NF EN 62305-2 : 2012 PROTECTION AGAINST LIGHTNING - PART 2: RISK MANAGEMENT
IEC 61558-1:2017 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
IEC 61918:2013 Industrial communication networks - Installation of communication networks in industrial premises
NF EN 61784-2 : APR 2015 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 2: ADDITIONAL FIELDBUS PROFILES FOR REAL-TIME NETWORKS BASED ON ISO/IEC 8802-3
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEC 61784-5-3:2013 Industrial communication networks - Profiles - Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3
IEC 60364-4-44:2007+AMD1:2015 CSV Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances
NF EN 61241-14 : 2004 ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 14: SELECTION AND INSTALLATION
IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
NF EN 50173-2 : 2010 AMD 1 2011 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 2: OFFICE PREMISES
NF EN 50346 : 2004 AMD 2 2009 INFORMATION TECHNOLOGY - CABLING INSTALLATION - TESTING OF INSTALLED CABLING
IEC 60079-14:2013 Explosive atmospheres - Part 14: Electrical installations design, selection and erection
NF EN 62305-4 : 2012 PROTECTION AGAINST LIGHTNING - PART 4: ELECTRICAL AND ELECTRONIC SYSTEMS WITHIN STRUCTURES
NF EN 60950 : 2000 SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT
NF EN 61918 : 2014 INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES
IEC 61784-5-2:2013 Industrial communication networks - Profiles - Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2
NF EN 61000-6-1 : 2007 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
NF EN 60079-0 : 2013 AMD 11 2014 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
NF EN 50173-5 : 2010 AMD 2 2013 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 5: DATA CENTERS
IEC 60050-826:2004 International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations
NF EN 50310 : 2017 TELECOMMUNICATIONS BONDING NETWORKS FOR BUILDINGS AND OTHER STRUCTURES
IEC 62305-4:2010 Protection against lightning - Part 4: Electrical and electronic systems within structures
IEC 61386-1:2008+AMD1:2017 CSV Conduit systems for cable management - Part 1: General requirements
IEC 62305-2:2010 Protection against lightning - Part 2: Risk management
NFC 01 195 : 99 AMD 1 2001 ELECTROTECHNICAL VOCABULARY - CHAPTER 195: EARTHING AND PROTECTION AGAINST ELECTRIC SHOCK
IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
IEC 61784-3-1:2010 Industrial communication networks - Profiles - Part 3-1: Functional safety fieldbuses - Additional specifications for CPF 1
NF EN 60079-14 : 2014 EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION
IEC 61784-3:2016+AMD1:2017 CSV Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions
IEC 60364-5-52:2009 Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems
IEC 61784-2:2014 Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.