• There are no items in your cart

NF EN 50521 : 2009 AMD 1 2012

Current
Current

The latest, up-to-date edition.

CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
Published date

11-23-2012

1 Domaine d'application
2 Références normatives
3 Définitions
4 Classification
  4.1 Généralités
  4.2 Type de connecteur
  4.3 Caractéristiques supplémentaires
5 Exigences de construction et performances
  5.1 Généralités
  5.2 Marquage et identification
  5.3 Dispositions contre un appariage incorrect
       (non-appariable)
  5.4 Protection contre les chocs électriques
  5.5 Connexions de sortie et méthodes de connexion
  5.6 Résistance au vieillissement
  5.7 Conception générale
  5.8 Conception d'une fiche pour câble
  5.9 Degré de protection (Code IP)
  5.10 Rigidité diélectrique
  5.11 Solidité mécanique et électrique
  5.12 Plage de température ambiante
  5.13 Echauffement
  5.14 Dispositif d'arrêt de traction et de torsion
       de câble
  5.15 Résistance mécanique
  5.16 Connecteur sans dispositif de verrouillage
  5.17 Connecteur avec dispositif de verrouillage
  5.18 Distances d'isolement et lignes de fuite
  5.19 Isolation
  5.20 Parties isolantes
  5.21 Pièces conductrices et résistance à la corrosion
6 Essais
  6.1 Généralités
  6.2 Préparation des éprouvettes
  6.3 Réalisation des essais
  6.4 Programme d'essai (individuel de série) des fiches
       pour câbles non-démontables
  6.5 Programme d'essai
Annexe A (normative) Symbole
Bibliographie

La présente norme s'applique à des connecteurs de la classe d'application A conformes à la EN 61730-1, utilisés dans les systèmes photovoltaïques de tension assignée allant jusqu'à 1000 V c.c. et de courant assigné allant jusqu'à 125 A par contact. La présente norme s'applique à des connecteurs sans pouvoir de coupure mais qui peuvent être branchés et débranchés sous tension.

DevelopmentNote
Indice de classement: C57-339. PR NF EN 50521 July 2008. (07/2008)
DocumentType
Standard
PublisherName
Association Francaise de Normalisation
Status
Current

Standards Relationship
EN 50521:2008/A1:2012 Identical

XP C15 712-3 : 2016 XP PHOTOVOLTAIC INSTALLATIONS WITH ENERGY STORAGE AND CONNECTED TO A PUBLIC DISTRIBUTION NETWORK
UTEC 15 712-2 : 2013 INSTALLATIONS ELECTRIQUES A BASSE TENSION - GUIDE PRATIQUE - INSTALLATIONS PHOTOVOLTAIQUES AUTONOMES NON RACCORDEES AU RESEAU PUBLIC DE DISTRIBUTION AVEC STOCKAGE PAR BATTERIE
UTEC 15 712-1 : 2013 INSTALLATIONS ELECTRIQUES A BASSE TENSION - GUIDE PRATIQUE - INSTALLATIONS PHOTOVOLTAIQUES SANS STOCKAGE ET RACCORDEES AU RESEAU PUBLIC DE DISTRIBUTION
UTEC 18 510-2 : 2013 PRESCRIPTIONS DE SECURITE D'ORDRE ELECTRIQUE RELATIVES AUX OPERATIONS EFFECTUEES SUR LES INSTALLATIONS DE PRODUCTION D'ELECTRICITE OU DANS LEUR ENVIRONNEMENT

NF EN 60352-6 : 1998 SOLDERLESS CONNECTIONS - PART 6: INSULATION PIERCING CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
IEC 60352-3:1993 Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance
NF EN 60068 2-75 : 2015 ENVIRONMENTAL TESTING - PART 2-75: TESTS - TEST EH: HAMMER TESTS
NF EN 60352-4 : 2001 SOLDERLESS CONNECTIONS - PART 4: SOLDERLESS NON-ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
IEC 60068-2-70:1995 Environmental testing - Part 2-70: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands
IEC 60364-7-712:2017 Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems
IEC 60228:2004 Conductors of insulated cables
IEC 61984:2008 Connectors - Safety requirements and tests
IEC 60352-6:1997 Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance
IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
NF EN 60352-5 : 2012 SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
IEC 60998-2-3:2002 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units
IEC 61215:2005 Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval
NF EN 60664-1 : 2007 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
NF EN ISO 6988 : 1995 METALLIC AND OTHER NON-ORGANIC COATINGS - SULFUR DIOXIDE TEST WITH GENERAL CONDENSATION OF MOISTURE
IEC 60999-2:2003 Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included)
NFC 41 101 : 1995 HIGH VOLTAGE TEST TECHNIQUES - PART 1: GENERAL DEFINITIONS AND TEST REQUIREMENTS
IEC 61210:2010 Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
NFC 01 826 : 2004 ELECTROTECHNICAL VOCABULARY - CHAPTER 826 - ELECTRICAL INSTALLATIONS OF BUILDINGS
NF EN ISO 4892-2 : 2013 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS
NF EN 60695-11-10 : 2013 FIRE HAZARD TESTING - PART 11-10: TEST FLAMES - 50 W HORIZONTAL AND VERTICAL FLAME TEST METHODS
NF EN 61140 : 2016 PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT
NF EN 60999-2 : 2003 CONNECTING DEVICES - ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS - PART 2: PARTICULAR REQUIREMENTS FOR CLAMPING UNITS FOR CONDUCTORS ABOVE 35 MM[2] UP TO 300 MM[2] (INCLUDED)
NF EN 60352-3 : 2002 SOLDERLESS CONNECTIONS - PART 3: SOLDERLESS ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
NF EN 60529 : 92 AMD 2 2014 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE)
NF EN 60228 : 2005 CONDUCTORS OF INSULATED CABLES
NF EN 60352-7 : 2003 SOLDERLESS CONNECTIONS - PART 7: SPRING CLAMP CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
NF EN 61215 : 2005 CRYSTALLINE SILICON TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
IEC 60999-1:1999 Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included)
NF EN 60309-1 : 1999 AMD 2 2013 PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS
NFC 01 581 : 82 AMD 1 1999 ELECTROTECHNICAL VOCABULARY - CHAPTER 581 - ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT
NF EN 60512-1 : 2001 CONNECTORS FOR ELECTRONIC EQUIPMENT - TEST AND MEASUREMENTS - PART 1: GENERAL
NF EN 61730-1 : 2007 AMD 11 2015 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
NF EN 60999-1 : 2000 CONNECTING DEVICES - ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREW LESS-TYPE CLAMPING UNITS - PART 1: GENERAL REQUIREMENTS AND PARTICULAR REQUIREMENTS FOR CLAMPING UNITS FOR CONDUCTORS FROM 0,2 MM[2] TO 35 MM[2] (INCLUDED)
IEC 60352-5:2012 Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance
NF EN 60068-1 : 2014 ENVIRONMENTAL TESTING - PART 1: GENERAL AND GUIDANCE
NF EN 60068 2-14 : 2009 ENVIRONMENTAL TESTING - PART 2-14: TESTS - TEST N: CHANGE OF TEMPERATURE
IEC TR 60943:1998+AMD1:2008 CSV Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals
IEC 61730-1:2016 Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction
IEC 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
IEC 60512-11-7:2003 Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test
HD 60364-7-712:2016 Low-voltage electrical installations - Part 7-712: Requirements for special installations or locations - Photovoltaic (PV) systems
NF EN 60068-2-78 : 2013 ENVIRONMENTAL TESTING - PART 2-78: TESTS - TEST CAB: DAMP HEAT, STEADY STATE
NF EN 61984 : 2009 CONNECTORS - SAFETY REQUIREMENTS AND TESTS
IEC 60352-2:2006+AMD1:2013 CSV Solderless connections - Part 2: Crimped connections - Generalrequirements, test methods and practical guidance
IEC 60050-826:2004 International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations
IEC 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
IEC 60060-1:2010 High-voltage test techniques - Part 1: General definitions and test requirements
IEC 60512-1:2001 Connectors for electronic equipment - Tests and measurements - Part 1: General
IEC 61140:2016 Protection against electric shock - Common aspects for installation and equipment
NF EN 60352-2 : 2006 AMD 1 2014 SOLDERLESS CONNECTIONS - PART 2: CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
IEC 60695-2-10:2013 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
NF EN 50262 : 1999 AMD 2 2005 METRIC CABLE GLANDS FOR ELECTRICAL INSTALLATIONS
IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
ISO 6988:1985 Metallic and other non organic coatings Sulfur dioxide test with general condensation of moisture
IEC 60050-581:2008 International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment
NF EN 60998-2-3 : 2004 CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 2-3: PARTICULAR REQUIREMENTS FOR CONNECTING DEVICES AS SEPARATE ENTITIES WITH INSULATION-PIERCING CLAMPING UNITS
IEC 60352-7:2002 Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance
NF EN 60512 11-7 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-7: CLIMATIC TESTS - TEST 11G: FLOWING MIXED GAS CORROSION TEST

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.