NF EN 60068 2-27 : 2009
Current
The latest, up-to-date edition.
01-12-2013
AVANT-PROPOS
INTRODUCTION
1 Domaine d'application
2 Références normatives
3 Termes et définitions
4 Description de l'appareillage d'essai
4.1 Caractéristiques requises
4.2 Chaîne de mesure
4.3 Fixation
5 Sévérités
6 Pré-conditionnement
7 Mesures initiales et essai de performance de
fonctionnement
8 Epreuve
9 Reprise
10 Mesures finales
11 Renseignements que doit donner la spécification
particulière
12 Renseignements à fournir dans le rapport d'essai
Annexe A (normative) Sélection et application des formes
d'impulsion - Guide
Annexe B (informative) Spectres de réponse aux chocs et
autres caractéristiques des formes d'impulsion
Annexe C (informative) Comparaison entre essais d'impact
Annexe ZA (normative) Références normatives à d'autres
publications internationales avec les publications
européennes correspondantes
Bibliographie
Cette partie de la CEI 60068 fournit un mode opératoire normalisé pour déterminer l'aptitude d'un spécimen à supporter des chocs répétitifs ou non répétitifs de sévérités spécifiées. Le but de cet essai est de mettre en évidence une défaillance mécanique et/ou une dégradation des performances spécifiées, ou les dommages ou dégradations cumulés dus aux chocs. Il peut aussi être utilisé dans certains cas, conjointement à la spécification particulière, pour déterminer la robustesse de structure des spécimens ou comme essai d'assurance de la qualité. Cet essai est en premier lieu destiné aux spécimens non emballés et aux éléments placés dans leur coffret de transport lorsque ce dernier peut être considéré comme faisant partie du spécimen. Si un élément est à soumettre aux essais en étant non emballé, il est désigné comme un spécimen d'essai.
| DevelopmentNote |
Indice de classement: C20-727. PR NF EN 60068 2-27 December 2006. (12/2006) Supersedes NF EN 60068 2-29. (07/2015)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 60068-2-27:2009 | Identical |
| IEC 60068-2-27:2008 | Identical |
| NF EN 60947-5-1 : 2004 AMD 1 2009 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES |
| NF EN 45502-2-1 : 2004 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-1: PARTICULAR REQUIREMENTS FOR ACTIVE IMPLANTABLE MEDICAL DEVICES INTENDED TO TREAT BRADYARRHYTHMIA (CARDIAC PACEMAKERS) |
| NF EN 12830 : 1999 | TEMPERATURE RECORDERS FOR THE TRANSPORT, STORAGE AND DISTRIBUTION OF CHILLED, FROZEN, DEEP-FROZEN/QUICK-FROZEN FOOD AND ICE CREAM - TESTS, PERFORMANCE, SUITABILITY |
| NF EN 60947-5-5 : 1998 AMD 2 2017 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION |
| NF EN 60122-1 : 2003 | QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| NF EN 62025-2 : 2005 | HIGH FREQUENCY INDUCTIVE COMPONENTS - NON-ELECTRICAL CHARACTERISTICS AND MEASURING METHODS - PART 2: TEST METHODS FOR NON-ELECTRICAL CHARACTERISTICS |
| NF EN ISO 11608-4 : 2007 | PEN-INJECTORS FOR MEDICAL USE - PART 4: REQUIREMENTS AND TEST METHODS FOR ELECTRONIC AND ELECTROMECHANICAL PEN-INJECTORS |
| NF EN 60255 21-2 : 1998 | ELECTRICAL RELAYS - PART 21: VIBRATION, SHOCK, BUMP AND SEISMIC TESTS ON MEASURING RELAYS AND PROTECTION EQUIPMENT - SECTION 2: SHOCK AND BUMP TESTS |
| NF EN 60761-2 : 2005 | EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 2: SPECIFIC REQUIREMENTS FOR AEROSOLS MONITORS INCLUDING TRANSURANIC AEROSOLS |
| NF EN 60761-5 : 2005 | EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 5: SPECIFIC REQUIREMENTS FOR TRITIUM MONITORS |
| NF EN 50132-4-1 : 2002 | ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 4-1: BLACK AND WHITE MONITORS |
| NF EN 60749-10 : 2002 | SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS - PART 10: MECHANICAL SHOCK |
| NF EN 61582 : 2006 | RADIATION PROTECTION INSTRUMENTATION - IN VIVO COUNTERS - CLASSIFICATION, GENERAL REQUIREMENTS AND TEST PROCEDURES FOR PORTABLE, TRANSPORTABLE AND INSTALLED EQUIPMENT |
| NF EN 54-24 : 2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS |
| NF EN 60068 2-32 : 1994 | BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST ED: FREE FALL |
| NF EN 60938-1 : 2008 AMD 1 2008 | FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION |
| NF EN 62052-11 : 2003 AMD 1 2017 | ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT |
| NF EN 60761-3 : 2005 | EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 3: SPECIFIC REQUIREMENTS FOR RADIOACTIVE NOBLE GAS MONITORS |
| NF EN 60947 5-2 : 2008 AMD 1 2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES |
| NFE 09 031 : 2017 | PEDAL SWITCHES FOR STARTING AND STOPPING - TECHNICAL SPECIFICATIONS FOR ACCIDENT PREVENTION |
| NF EN 60068 2-31 : 2008 | ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS |
| NF EN 14803 : 2006 | IDENTIFICATION AND/OR DETERMINATION OF THE QUANTITY OF WASTE |
| NF EN 54-7 : 2001 AMD 2 2006 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION |
| NF EN 62093 : 2005 | BALANCE-OF SYSTEM COMPONENTS FOR PHOTOVOLTAIC SYSTEMS - DESIGN QUALIFICATION NATURAL ENVIRONMENTS |
| NF EN 61291 5-2 : 2003 | OPTICAL AMPLIFIERS - PART 5-2: QUALIFICATION SPECIFICATIONS - RELIABILITY QUALIFICATION FOR OPTICAL FIBRE AMPLIFIERS |
| NF EN 60068 2-29 : 1994 | BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST EB AND GUIDANCE: BUMP |
| NF EN 60947-5-8 : 2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-8: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - THREE-POSITION ENABLING SWITCHES |
| NF EN 60325 : 2004 | RADIATION PROTECTION INSTRUMENTATION - ALPHA, BETA AND ALPHA/BETA (BETA ENERGY > 60 KEV) CONTAMINATION METERS AND MONITORS |
| NF EN 45502-2-2 : 2008 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-2: PARTICULAR REQUIREMENTS FOR ACTIVE IMPLANTABLE MEDICAL DEVICES INTENDED TO TREAT TACHYARRHYTHMIA (INCLUDES IMPLANTABLE DEFIBRILLATORS) |
| NFP 99 306-1 : 2006 | ROAD TRAFFIC DATA - ELABORATION, STORAGE, DISTRIBUTION - DOPPLER-FIZEAU RADAR VEHICLE DETECTION UNITS AND DETECTORS - PART 1: CHARACTERISTICS |
| NF EN 62052-21 : 2006 | ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT |
| NF EN 62022 : 2008 | INSTALLED MONITORS FOR THE CONTROL AND DETECTION OF GAMMA RADIATIONS CONTAINED IN RECYCLABLE OR NON RECYCLABLE MATERIALS TRANSPORTED BY VEHICLES |
| NF EN 60761-1 : 2005 | EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 1: GENERAL REQUIREMENTS |
| NF EN 60761-4 : 2005 | EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 4: SPECIFIC REQUIREMENTS FOR IODINE MONITORS |
| NFP 99 253 : 2014 | ROAD EQUIPMENT - EMERGENCY CALL NETWORK - TECHNICAL CHARACTERISTICS OF EMERGENCY ROADSIDE PHONES AND CENTRAL CONTROL STATIONS |
| NFE 18 100 : 2013 | INDICATEURS ET INTEGRATEURS DE TEMPS/TEMPERATURE - ESSAIS ET PERFORMANCES |
| NF EN 50132-2-1 : 1997 | ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 2-1: BLACK AND WHITE CAMERAS |
| NF EN 60947-1 : 2007 AMD 2 2015 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| NF EN 62319-1 : 2005 | POLYMERIC THERMISTORS - DIRECTLY HEATED POSITIVE STEP FUNCTION TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60721-3-5:1997 | Classification of environmental conditions - Part 3: Classificationof groups of environmental parameters and their severities -Section 5: Ground vehicle installations |
| IEC 60068-2-47:2005 | Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests |
| NF EN 60068-2-47 : 2005 | ENVIRONMENTAL TESTING - PART 2-47: TEST METHODS - MOUNTING OF COMPONENTS, EQUIPMENT AND OTHER ARTICLES FOR VIBRATION, IMPACT AND SIMILAR DYNAMIC TESTS |
| NF EN 60068-1 : 2014 | ENVIRONMENTAL TESTING - PART 1: GENERAL AND GUIDANCE |
| IEC GUIDE 104:2010 | The preparation of safety publications and the use of basic safety publications and group safety publications |
| IEC 60068-2-55:2013 | Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce |
| NF EN 60721 3-5 : 1997 | CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - GROUND VEHICLE INSTALLATIONS |
| NF EN 60068 2-55 : 2013 | ENVIRONMENTAL TESTING - PART 2-55: TESTS - TEST EE AND GUIDANCE - LOOSE CARGO TESTING INCLUDING BOUNCE |
| NF EN 60721 3-1 : 1997 | CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - STORAGE |
| IEC 60721-3-1:1997 | Classification of environmental conditions - Part 3 Classification of groups of environmental parameters and their severities - Section 1: Storage |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.