• There are no items in your cart

NF EN 61010-1 : 2011

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
Superseded date

11-01-2021

Published date

01-12-2013

AVANT-PROPOS
INTRODUCTION
1 Domaine d'application et objet
   1.1 Domaine d'application
   1.2 Objet
   1.3 Vérification
   1.4 Conditions d'environnement
2 Références normatives
3 Termes et définitions
   3.1 Appareils et états des appareils
   3.2 Parties et accessoires
   3.3 Grandeurs électriques
   3.4 Essais
   3.5 Termes de sécurité
   3.6 Isolation
4 Essais
   4.1 Généralités
   4.2 Séquence d'essais
   4.3 Conditions de référence pour les essais
   4.4 Essai en CONDITION DE PREMIER DÉFAUT
5 Marquage, indications et documentation
   5.1 Marquage et indications
   5.2 Avertissements
   5.3 Durabilité du marquage
   5.4 Documentation
6 Protection contre les chocs électriques
   6.1 Généralités
   6.2 Détermination des parties ACCESSIBLES
   6.3 Limites admissibles pour les parties
        ACCESSIBLES
   6.4 Protection en CONDITION NORMALE
   6.5 Protection en CONDITION DE PREMIER DEFAUT
   6.6 Connexion aux circuits externes
   6.7 DISTANCES DANS L'AIR et LIGNES DE FUITE
   6.8 Procédure pour les essais de rigidité
        diélectrique
   6.9 Prescriptions relatives à la construction pour
        la protection contre les chocs électriques
   6.10 Raccordement à la source d'alimentation RÉSEAU
        et connexion entre les parties de l'appareil
   6.11 Sectionnement de la source d'alimentation
7 Protection contre les risques mécaniques
   7.1 Généralités
   7.2 Parties mobiles
   7.3 Stabilité
   7.4 Moyens de levage et de transport
   7.5 Montage mural
   7.6 Parties éjectées
8 Résistance mécanique aux chocs et aux vibrations
   8.1 Essai de rigidité de l'ENVELOPPE
   8.2 Essai de chute
9 Protection contre la propagation du feu
   9.1 Elimination ou réduction de l'inflammation à
        l'intérieur de l'appareil
   9.2 Retenue du feu à l'intérieur de l'appareil
        s'il se déclare
   9.3 Circuit à énergie limitée
   9.4 Prescriptions pour les appareils contenant
        des liquides inflammables
   9.5 Protection contre les surintensités
10 Limites de température de l'appareil et résistance
   à la chaleur
   10.1 Limites de température des surfaces pour la
        protection contre les brûlures
   10.2 Température des bobinages
   10.3 Autres mesures de température
   10.4 Réalisation des essais de température
   10.5 Résistance à la chaleur
11 Protection contre les DANGERS des fluides
   11.1 Généralités
   11.2 Nettoyage
   11.3 Déversement
   11.4 Débordement
   11.5 Electrolyte de batterie
   11.6 Appareils spécialement protégés
   11.7 Fluide sous pression et fuites
12 Protection contre les radiations, y compris les
   sources laser, et contre la pression acoustique
   et ultrasonique
   12.1 Généralités
   12.2 Appareils produisant un rayonnement ionisant
   12.3 Rayonnement ultraviolet (UV)
   12.4 Rayonnement hyperfréquences
   12.5 Pression acoustique et ultrasonique
   12.6 Sources laser
13 Protection contre les émissions de gaz, les
   explosions et les implosions
   13.1 Gaz toxiques et nocifs
   13.2 Explosion et implosion
14 Composants
   14.1 Généralités
   14.2 Moteurs
   14.3 Dispositifs de protection contre les
        surtempératures
   14.4 Porte-fusibles
   14.5 Sélecteurs de tension RÉSEAU
   14.6 Composants de HAUTE INTÉGRITÉ
   14.7 Transformateurs d'alimentation RÉSEAU testés
        en dehors de l'appareil
   14.8 Circuits imprimés
   14.9 Circuits ou composants utilisés comme
        dispositifs de limitation des surtensions
        transitoires
15 Protection par systèmes de verrouillage
   15.1 Généralités
   15.2 Prévention de réactivation
   15.3 Fiabilité
16 Appareils de mesure et d'essais
   16.1 Circuits de mesure de courant
   16.2 Multimètres et appareils similaires
Annex A (normative) Circuits de mesure du courant
                        ACCESSIBLE
Annex B (normative) Doigts d'épreuve normalisés
Annex C (normative) Mesure des distances dans
                        l'air et des lignes des fuite
Annex D (normative) Parties entre lesquelles des
                        prescriptions d'isolement
                        sont spécifiées
Annex E (normative) Réduction du degré de
                        POLLUTION
Annex F (normative) Essais individuels de série
Annex G (informative) Fuite et rupture des fluides
                        sous pression
Annex H (informative) Index des termes définis
Bibliographie
Annexe ZA (normative) Références normatives à
                        d'autres publications
                        internationales avec
                        les publications
                        européennes correspondantes

Specifies general safety requirements for electrical equipment meant for professional, industrial process, and educational use. Applies (in environmental conditions given in this standard) to electrical measurement and test equipment; electrical control equipment; electrical laboratory equipment. Does not cover reliable function, performance or other properties of the equipment; protection of servicing (repair) personnel; servicing (repair). Includes the following sections; marking and documentation; protection against electric shock; protection against mechanical hazards; resistance to heat; resistance to moisture and liquids. Also includes detailed definitions and annexes.

DevelopmentNote
Indice de classement: C42-020-1. Supersedes NFC 42 020. (10/2001) PR NF EN 61010-1 December 2004. (12/2004) PR NF EN 61010-1 May 2006. (05/2006) PR NF EN 61010-1 April 2009. (04/2009)
DocumentType
Standard
PublisherName
Association Francaise de Normalisation
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
SN EN 61010-1 : 2001 Identical
DIN EN 61010-1 : 2011 Identical
I.S. EN 61010-1:2010 Identical
EN 61010-1:2010 Identical
NBN EN 61010-1 : 2010 Identical
IEC 61010-1:2010+AMD1:2016 CSV Identical
UNE-EN 61010-1:2011 Identical

NF EN 12830 : 1999 TEMPERATURE RECORDERS FOR THE TRANSPORT, STORAGE AND DISTRIBUTION OF CHILLED, FROZEN, DEEP-FROZEN/QUICK-FROZEN FOOD AND ICE CREAM - TESTS, PERFORMANCE, SUITABILITY
NFE 18 152 : 2000 CENTRAL ACQUISITION SYSTEMS OF TIME/TEMPERATURE VALUES FOR STORAGE AND DISTRIBUTION OF CHILLED, FROZEN REFRIGERATED, QUICK-FROZEN FOODSTUFFS AND ICE CREAMS - TECHNICAL REQUIREMENTS
NF EN 61557-1 : 2007 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 1: GENERAL REQUIREMENTS
NF EN 61557-11 : 2009 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 11: EFFECTIVENESS OF RESIDUAL CURRENT MONITORS (RCMS) TYPE A AND TYPE B IN TT, TN AND IT SYSTEMS
NF EN 12693 : 2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
NF EN ISO 8655-1 : 2003 PISTON-OPERATED VOLUMETRIC APPARATUS - PART 1: TERMINOLOGY, GENERAL REQUIREMENTS AND USER RECOMMENDATIONS
XP ISO/TS 22595-1 : 2007 XP DENTISTRY - PLANT AREA EQUIPMENT - PART 1: SUCTION SYSTEMS
NF EN 60861 : 2008 EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS
NF EN 61557-2 : 2007 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 2: INSULATION RESISTANCE
NF EN 60405 : 2008 NUCLEAR INSTRUMENTATION - CONSTRUCTIONAL REQUIREMENTS AND CLASSIFICATION OF RADIOMETRIC GAUGES
NF EN 50249 : 2003 ELECTROMAGNETIC LOCATORS FOR BURIED PIPES AND CABLES - PERFORMANCE AND SAFETY
NF EN 61557-5 : 2007 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 5: RESISTANCE TO EARTH
NF EN 61557-3 : 2007 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 3: LOOP IMPEDANCE
NF EN 61557-6 : 2008 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 6: EFFECTIVENESS OF RESIDUAL CURRENT DEVICES (RCD) IN TT, TN AND IT SYSTEMS
NF EN 61557-12 : 2008 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 12: PERFORMANCE MEASURING AND MONITORING DEVICES (PMD)
NF EN 50463 : 2008 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS
NF EN 13150 : 2001 WORKBENCHES FOR LABORATORIES - DIMENSIONS, SAFETY REQUIREMENTS AND TEST METHODS
NF EN 13485 : 2002 THERMOMETERS FOR MEASURING THE AIR AND PRODUCT TEMPERATURE FOR THE TRANSPORT, STORAGE AND DISTRIBUTION OF CHILLED, FROZEN, DEEP-FROZEN/QUICK-FROZEN FOOD AND ICE CREAM - TESTS, PERFORMANCE, SUITABILITY

IEC 61672-2:2013+AMD1:2017 CSV Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests
2006/95/EC : 2006 DIRECTIVE 2006/1995/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 12 DECEMBER 2006 ON THE HARMONISATION OF THE LAWS OF MEMBER STATES RELATING TO ELECTRICAL EQUIPMENT DESIGNED FOR USE WITHIN CERTAIN VOLTAGE LIMITS (CODIFIED VERSION) (TEXT WITH EEA RELEVANCE)
IEC 60335-2-24:2010+AMD1:2012+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
IEC 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
ISO 9614-1:1993 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points
IEC 60332-2-2:2004 Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame
IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
IEC 60332-1-2:2004+AMD1:2015 CSV Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for 1 kW pre-mixed flame
IEC 61180-2:1994 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
ISO/IEC Guide 51:2014 Safety aspects Guidelines for their inclusion in standards
ISO 361:1975 Basic ionizing radiation symbol
ISO 3746:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
IEC 60405:2003 Nuclear instrumentation - Constructional requirements and classification of radiometric gauges
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEC 60364-4-44:2007+AMD1:2015 CSV Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV Low-voltage switchgear and controlgear - Part 1: General rules
IEC GUIDE 104:2010 The preparation of safety publications and the use of basic safety publications and group safety publications
IEC 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
IEC 62262:2002 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
ISO 306:2013 Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
IEC 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
IEC 60664-3:2016 Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
IEC 61010-031:2015 RLV Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test
IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 61180-1:1992 High-voltage test techniques for low voltage equipment - Part 1: Definitions, test and procedure requirements
ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60335-2-89:2010+AMD1:2012+AMD2:2015 CSV Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor
IEC 60799:1998 Electrical accessories - Cord sets and interconnection cord sets

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.