• There are no items in your cart

NFC 33 009-1 : 2008

Current
Current

The latest, up-to-date edition.

ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 1: FINGERPRINTING AND TYPE TESTS FOR RESINOUS COMPOUNDS
Published date

01-12-2013

1 Domaine d'application
2 Références normatives
3 Termes et définitions
4 Classification
Tableau 1 - Catégories de composés résineux
5 Essais d'identification
  5.1 Généralités
  5.2 Echantillonnage
  5.3 Préparation et conditionnement
  5.4 Séquence d'essais
  5.5 Rapport d'essai
Tableau 2 - Essais d'identification: méthodes et
            exigences d'essai
6 Essais de type
  6.1 Généralités
  6.2 Echantillonnage
  6.3 Préparation et conditionnement
  6.4 Essais
  6.5 Rapport d'essai
Tableau 3 - Essais de type: Méthodes et exigences d'essai
7 Méthodes d'essais
  7.1 Généralités
  7.2 Durée de vie en pot
  7.3 Pic exothermique
  7.4 Vieillissement à sec
  7.5 Vieillissement en condition humide (stabilité
      hydrolytique)
  7.6 Polymérisation en solution aqueuse
Annexe A (informative) Santé et sécurité
Annexe B (normative) Informations concernant la fourniture,
         l'emballage, le marquage et étiquetage
Annexe C (normative) Méthodes d'essai pour la conformité -
         Essai de vieillissement à sec
Annexe D (normative) Séquence d'essais et méthode
         d'essai pour les essais de type - Essai de
         vieillissement à sec
Annexe E (normative) Séquence d'essais et méthode d'essai
         pour les essais de type - Essai de vieillissement
         en condition humide (stabilité hydrolytique)

Ce Document d'Harmonisation spécifie les méthodes et les exigences d'essai pour: les essais d'identification (comme définis en 3.12), les essais de type (comme définis en 3.13). Des composés résineux polymérisables sans solvant destinés à être utilisés pour l'isolation électrique et la protection mécanique dans les accessoires de câbles couverts par l'EN 50393, le HD 629.1 S2 et le HD 629.2 S2, pour la basse et la moyenne tension jusqu'à 20,8/36 (42) kV. Il n'existe pas de lien obligatoire entre les essais d'identification et les essais de type des matériaux et les essais de type des accessoires. Ils doivent être considérés comme des essais indépendants mais ils peuvent être réalisés en combinaison avec les essais de type des accessoires.

DevelopmentNote
Indice de classement: C33-009-1. (06/2008)
DocumentType
Standard
PublisherName
Association Francaise de Normalisation
Status
Current

IEC 60243-1:2013 Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies
HD 629.2 S2:2006/A1:2008 TEST REQUIREMENTS ON ACCESSORIES FOR USE ON POWER CABLES OF RATED VOLTAGE FROM 3,6/6(7,2) KV UP TO 20,8/36(42) KV - PART 2: CABLES WITH IMPREGNATED PAPER INSULATION
NF EN ISO 868 : 2003 PLASTICS AND EBONITE - DETERMINATION OF INDENTATION HARDNESS BY MEANS OF A DUROMETER (SHORE HARDNESS)
ISO 7056:1981 Plastics laboratory ware Beakers
ISO 3521:1997 Plastics — Unsaturated polyester and epoxy resins — Determination of overall volume shrinkage
IEC 60250:1969 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
NFB 35 902 : 83 FD PLASTICS LABORATORY WARE - BEAKERS
ISO 4895:2014 Plastics Liquid epoxy resins Determination of tendency to crystallize
NF EN 60243-1 : 2013 ELECTRICAL STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES
NF EN ISO 3521 : 1999 PLASTICS - UNSATURATED POLYESTER AND EPOXY RESINS - DETERMINATION OF OVERALL VOLUME SHRINKAGE
NF EN 50393 : 2015 TEST METHODS AND REQUIREMENTS FOR ACCESSORIES FOR USE ON DISTRIBUTION CABLES OF RATED VOLTAGE 0,6/1,0 (1,2) KV
NFC 26 230 : 1970 METHODS OF TESTING INSULATING MATERIALS - RECOMMENDED METHODS FOR THE DETERMINATION OF THE PERMITTIVITY AND DIELECTRIC DISSIPATION FACTOR OF ELECTRICAL INSULATING MATERIAL AT POWER, AUDIO AND RADIO FREQUENCIES
NF EN 61234-2 : 1998 ELECTRICAL INSULATING MATERIALS - METHODS OF TEST FOR THE HYDROLYTIC STABILITY - PART 2: MOULDED THERMOSETS
EN ISO 4895:2014 Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:2014)
NFC 01 461 : 2008 INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 461: ELECTRIC CABLES
NF EN ISO 2555 : 1999 PLASTICS - RESINS IN THE LIQUID STATE OR AS EMULSIONS OR DISPERSIONS - DETERMINATION OF APPARENT VISCOSITY BY THE BROOKFIELD TEST METHOD
NF EN ISO 179 : 1997
ISO 2555:1989 Plastics Resins in the liquid state or as emulsions or dispersions Determination of apparent viscosity by the Brookfield Test method
ISO 1183:1987 Plastics Methods for determining the density and relative density of non-cellular plastics
IEC 60093:1980 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
IEC 61234-2:1997 Electrical insulating materials - Methods of test for the hydrolytic stability - Part 2: Moulded thermosets
ISO 291:2008 Plastics Standard atmospheres for conditioning and testing
IEC 60050-461:2008 International Electrotechnical Vocabulary (IEV) - Part 461: Electric cables
EN ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
ISO 179:1993 Plastics Determination of Charpy impact strength
NFC 26 215 : 1982 METHODS OF TESTING INSULATING MATERIALS - METHODS OF TEST FOR VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS
HD 629.1 S2:2006/A1:2008 TEST REQUIREMENTS ON ACCESSORIES FOR USE ON POWER CABLES OF RATED VOLTAGE FROM 3,6/6(7,2) KV UP TO 20,8/36(42) KV - PART 1: CABLES WITH EXTRUDED INSULATION
ISO 868:2003 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.