• There are no items in your cart

OIML R 76-1 : 2006

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

NON-AUTOMATIC WEIGHING INSTRUMENTS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS
Superseded date

08-17-2021

Published date

01-12-2013

Foreword
T Terminology
1 Scope
2 Principles of the Recommendation
3 Metrological requirements
4 Technical requirements for a self- or
  semi-self-indicating instrument
5 Technical requirements for electronic instruments
6 Technical requirements for non-self-indicating
  instruments
7 Marking of instruments and modules
8 Metrological controls
Annex A - Testing procedures for non-automatic weighing
          instruments
Annex B - Additional tests for electronic instruments
Annex C - Testing and certification of indicators and
          analog data processing devices as modules of
          non-automatic weighing instruments
Annex D - Testing and certification of digital data
          processing devices, terminals and digital
          displays as modules of non-automatic weighing
          instruments
Annex E - Testing and certification of weighing modules
          as modules of non-automatic weighing instruments
Annex F - Compatibility checking of modules of non-automatic
          weighing instruments
Annex G - Additional examinations and tests for
          software-controlled digital devices and instruments
Bibliography

Describes weighbridges and groups of associated non-automatic axle (or wheel) load weighers that determine simultaneously the total mass of a road vehicle with all axles (or wheels) being simultaneously supported by appropriate parts of a load receptor.

Committee
TC 9/SC 1
DocumentType
Standard
PublisherName
Organisation Internationale de Metrologie Legale
Status
Superseded
SupersededBy

Standards Relationship
GOST OIML R 76-1 : 2011 ERRATA 2014 Identical
SNV DIN EN 45501 : 1992 Identical
SNV NF EN 45501 : 1993 Identical

PREN 932-5 : DRAFT 2009 TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION
DIN EN 15761 E : 2010 PRE-SHAPED GROWING MEDIA - DETERMINATION OF LENGTH, WIDTH, HEIGHT, VOLUME AND BULK DENSITY
ISO 16532-3:2010 Paper and board — Determination of grease resistance — Part 3: Turpentine test for voids in glassine and greaseproof papers
09/30173892 DC : 0 BS ISO 16532-3 - PAPER AND BOARD - DETERMINATION OF GREASE RESISTANCE - PART 3: TURPENTINE TEST FOR VOIDS IN GLASSINE AND GREASEPROOF PAPERS
OIML R 134-1 : 2006 AUTOMATIC INSTRUMENTS FOR WEIGHING ROAD VEHICLES IN MOTION AND MEASURING AXLE LOADS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS
OIML R 59-1 : 2016 MOISTURE METERS FOR CEREAL GRAINS AND OILSEEDS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
UNE-EN 15761:2010 Pre-shaped growing media - Determination of length, width, height, volume and bulk density
BS ISO 16532-3:2010 Paper and board. Determination of grease resistance Turpentine test for voids in glassine and greaseproof papers
OIML R 50-1 : 2014 CONTINUOUS TOTALIZING AUTOMATIC WEIGHING INSTRUMENTS (BELT WEIGHERS) - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
08/30177568 DC : DRAFT FEB 2008 BS EN 15761 - PRE-SHAPED GROWING MEDIA - DETERMINATION OF LENGTH, WIDTH, HEIGHT, VOLUME AND BULK DENSITY
I.S. EN 932-5:2012 TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5 - COMMON EQUIPMENT AND CALIBRATION
NF EN ISO 8655-6 : 2003 PISTON-OPERATED VOLUMETRIC APPARATUS - PART 6: GRAVIMETRIC METHODS FOR THE DETERMINATION OF MEASUREMENT ERROR
I.S. EN ISO 8655-1:2002 PISTON-OPERATED VOLUMETRIC APPARATUS - PART 1: TERMINOLOGY, GENERAL REQUIREMENTS AND USER RECOMMENDATIONS
ECA 10-18 : 2015 GUIDELINES ON THE CALIBRATION OF NON-AUTOMATIC WEIGHING INSTRUMENTS
DIN EN 15761:2010-04 Pre-shaped growing media - Determination of length, width, height, volume and bulk density
I.S. EN 15761:2009 PRE-SHAPED GROWING MEDIA - DETERMINATION OF LENGTH, WIDTH, HEIGHT, VOLUME AND BULK DENSITY
DIN EN 932-5:2012-05 Tests for general properties of aggregates - Part 5: Common equipment and calibration
I.S. EN ISO 8655-6:2002 PISTON-OPERATED VOLUMETRIC APPARATUS - PART 6: GRAVIMETRIC METHODS FOR THE DETERMINATION OF MEASUREMENT ERROR
UNI EN ISO 8655-1 : 2004 PISTON-OPERATED VOLUMETRIC APPARATUS - PART 1: TERMINOLOGY, GENERAL REQUIREMENTS AND USER RECOMMENDATIONS
UNI EN ISO 8655-6 : 2005 PISTON-OPERATED VOLUMETRIC APPARATUS - PART 6: GRAVIMETRIC METHODS FOR THE DETERMINATION OF MEASUREMENT ERROR
UNI EN 932-5 : 2012 TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION
OIML D 16 : 2011 PRINCIPLES OF ASSURANCE OF METROLOGICAL CONTROL
09/30205556 DC : 0 BS EN 932-5 - TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION
BS EN 15761:2009 Pre-shaped growing media. Determination of length, width, height, volume and bulk density
UNI EN 15761 : 2010 PRE-SHAPED GROWING MEDIA - DETERMINATION OF LENGTH, WIDTH, HEIGHT, VOLUME AND BULK DENSITY
OIML R 50-2 : 2014 CONTINUOUS TOTALIZING AUTOMATIC WEIGHING INSTRUMENTS (BELT WEIGHERS) - PART 2: TEST PROCEDURES
BS EN 932-5:2012 Tests for general properties of aggregates Common equipment and calibration
BS EN ISO 8655-1:2002 Piston-operated volumetric apparatus Terminology, general requirements and user recommendations
UNE-EN 932-5:2012 Tests for general properties of aggregates - Part 5: Common equipment and calibration
ISO 8655-1:2002 Piston-operated volumetric apparatus Part 1: Terminology, general requirements and user recommendations
EN 15761:2009 Pre-shaped growing media - Determination of length, width, height, volume and bulk density
EN ISO 8655-6:2002/AC:2009 PISTON-OPERATED VOLUMETRIC APPARATUS - PART 6: GRAVIMETRIC METHODS FOR THE DETERMINATION OF MEASUREMENT ERROR (ISO 8655-6:2002/Cor 1:2008)
EN 932-5:2012/AC:2014 TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION
EN ISO 8655-1:2002/AC:2009 PISTON-OPERATED VOLUMETRIC APPARATUS - PART 1: TERMINOLOGY, GENERAL REQUIREMENTS AND USER RECOMMENDATIONS
OIML D 26 : 2010 GLASS DELIVERY MEASURES - AUTOMATIC PIPETTES
UNE-ISO 16532-3:2017 Paper and board. Determination of grease resistance. Part 3: Turpentine test for voids in glassine and greaseproof papers
BS EN ISO 8655-6:2002 Piston-operated volumetric apparatus Gravimetric methods for the determination of measurement error
ISO 8655-6:2002 Piston-operated volumetric apparatus Part 6: Gravimetric methods for the determination of measurement error

OIML D 11 : 2013 GENERAL REQUIREMENTS FOR MEASURING INSTRUMENTS - ENVIRONMENTAL CONDITIONS
IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
ISO 7637-3:2016 Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
IEC 61000-4-1:2006 Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series
ISO 7637-1:2015 Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations
IEC 60068-3-1:2011 Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests
IEC 61000-4-11:2004+AMD1:2017 CSV Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
ISO 7637-2:2011 Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only
IEC 61000-6-1 : 3.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
OIML B 3 : 2011 OIML BASIC CERTIFICATE SYSTEM FOR OIML TYPE EVALUATION OF MEASURING INSTRUMENTS
IEC 61000-4-6 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
ISO/IEC Guide 99:2007 International vocabulary of metrology Basic and general concepts and associated terms (VIM)
OIML B 10 : 2011 AMD 2012 FRAMEWORK FOR A MUTUAL ACCEPTANCE ARRANGEMENT ON OIML TYPE EVALUATIONS
IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 60068-3-4:2001 Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.