![header thumbnail](/images/img-default-logo.png)
PREN 14141 : DRAFT 2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
![header thumbnail](/images/img-default-logo.png)
06-01-2013
01-12-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Functional requirements
5 Requirements and tests
6 Certification
7 Quality
8 Type tests
9 Functional and other qualification tests
10 Marking
Annex A (normative) - Type test on general design
and production of pipeline valves
Annex B (normative) - Strength test on torque/thrust
Annex C (normative) - Functional test on clean gas
(on option)
Annex D (normative) - Functional test for abrasion
resistance to dirty service of ball valves
(on option)
Annex E (normative) - Wall thickness measurement
Annex F (informative) - Additional requirements
Annex G (informative) - Summary of tests on
product and type tests
Bibliography
Describes requirements and appropriate verification tests carried out during production and for certification purposes to verify that the valves conform to the requirements.
Committee |
TC 69
|
DocumentType |
Draft
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
11/30248438 DC : 0 | Identical |
EN 12982:2009 | Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves |
EN 1515-1:1999 | Flanges and their joints - Bolting - Part 1: Selection of bolting |
EN 682:2002/A1:2005 | ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS |
ISO 5210:2017 | Industrial valves — Multi-turn valve actuator attachments |
EN 10228-4:2016 | Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings |
EN ISO 5210:2017 | Industrial valves - Multi-turn valve actuator attachments (ISO 5210:2017) |
EN 10228-2:2016 | Non-destructive testing of steel forgings - Part 2: Penetrant testing |
EN 1503-2:2000 | Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified in European Standards |
EN 1594:2013 | Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements |
ISO 14313:2007 | Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves |
EN 1503-1:2000 | Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards |
EN 558:2017 | Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves |
EN ISO 23278 : 2015 | NON-DESTRUCTIVE TESTING OF WELDS - MAGNETIC PARTICLE TESTING - ACCEPTANCE LEVELS (ISO 23278:2015) |
EN 12516-1:2014 | Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
EN ISO 23277:2015 | Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015) |
EN 45011 : 1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS |
EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
EN 736-2:2016 | Valves - Terminology - Part 2: Definition of components of valves |
EN 10228-1:1999 | Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection |
EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
EN 1515-2:2001 | Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated |
EN ISO 17637:2016 | Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016) |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
EN 10228-3:2016 | Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings |
EN 12516-3:2002/AC:2003 | VALVES - SHELL DESIGN STRENGTH - PART 3: EXPERIMENTAL METHOD |
EN 1371-1:2011 | Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings |
EN 10204:2004 | Metallic products - Types of inspection documents |
EN ISO 10497:2010 | Testing of valves - Fire type-testing requirements (ISO 10497:2010) |
ISO 9001:2015 | Quality management systems — Requirements |
EN 1369:2012 | Founding - Magnetic particle testing |
EN 12681 : 2003 | FOUNDING - RADIOGRAPHIC EXAMINATION |
MSS SP 55 : 2011 | QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - VISUAL METHOD FOR EVALUATION OF SURFACE IRREGULARITIES |
ISO 10497:2010 | Testing of valves — Fire type-testing requirements |
EN 12517-1:2006 | Non-destructive testing of welds - Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels |
ISO/IEC Guide 65:1996 | General requirements for bodies operating product certification systems |
PREN 12266-1 : DRAFT 2009 | INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 1: PRESSURE TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - MANDATORY REQUIREMENTS |
EN 549:1994 | Rubber materials for seals and diaphragms for gas appliances and gas equipment |
EN 12516-2:2014 | Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells |
EN 13942:2009/AC:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
EN 571-1:1997 | Non destructive testing - Penetrant testing - Part 1: General principles |
EN ISO 17638:2016 | Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016) |
EN ISO 5211:2017 | Industrial valves - Part-turn actuator attachments (ISO 5211:2017) |
EN 19:2016 | Industrial valves - Marking of metallic valves |
EN 45004 : 1995 | GENERAL CRITERIA FOR THE OPERATION OF VARIOUS TYPES OF BODIES PERFORMING INSPECTION |
EN 736-3:2008 | Valves - Terminology - Part 3: Definition of terms |
EN 1435:1997/A2:2003 | NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING OF WELDED JOINTS |
ISO 5211:2017 | Industrial valves — Part-turn actuator attachments |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.