• There are no items in your cart

PREN 1504-3 : DRAFT 2015

Current
Current

The latest, up-to-date edition.

PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS
Published date

07-20-2015

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements for constituent
  materials
5 Performance characteristics
  for intended uses
6 Product Characteristics
7 Sampling
8 Assessment and verification of
  the constancy of performance - AVCP
9 Marking and labelling
Annex A (informative) - Minimum frequency
        of testing for FPC
Annex B (informative) - Test methods for
        special applications
Annex C (informative) - Electrical resistivity
Annex ZA (informative) - Clauses of this
        European Standard addressing the
        provisions of the EU Construction
        Products Regulation
Bibliography

Describes repair mortars and concretes, possibly used in conjunction with other products and systems, to restore or to replace defective concrete and to protect reinforcement, necessary to extend the service life of a concrete structure exhibiting deterioration.

Committee
TC 104
DocumentType
Draft
PublisherName
Comite Europeen de Normalisation
Status
Current

Standards Relationship
15/30324901 DC : 0 Identical
15/30324901 DC : DRAFT JULY 2015 Identical
01/102985 DC : DRAFT MAR 2001 Identical

BS EN 13687-2:2002 Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility Thunder-shower cycling (thermal shock)
BS EN 13294:2002 Products and systems for the protection and repair of concrete structures. Test methods. Determination of stiffening time
EN 13395-1:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 1: Test for flow of thixotropic mortars
EN 13294:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time
EN 13295:2004 Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to carbonation
EN 13057:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption
EN 12617-4:2002 Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion
EN 13395-3:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 3: Test for flow of repair concrete
EN 13396:2004 Products and systems for the protection and repair of concrete structures - Test methods - Measurement of chloride ion ingress
02/104236 DC : DRAFT JUNE 2002 EN 14487-1 - SPRAYED CONCRETE - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY
DIN EN 13687-1:2002-05 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF THERMAL COMPATIBILITY - PART 1: FREEZE-THAW CYCLING WITH DE-ICING SALT IMMERSION
DIN EN 13687-2:2002-05 Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock); German version EN 13687-2:2002
DIN EN 13294:2002-09 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF STIFFENING TIME
DIN EN 13584:2003-11 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF CREEP IN COMPRESSION FOR REPAIR PRODUCTS
DIN EN 13395-3:2002-09 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF WORKABILITY - PART 3: TEST FOR FLOW OF REPAIR CONCRETE
DIN EN 13687-4:2002-05 Products and systems for the protection and repair of concrete structures - Test method; Determination of thermal compatibility - Part 4: Dry thermal cycling; German Version EN 13687-4:2002
I.S. EN 13395-1:2002 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF WORKABILITY - PART 1: TEST FOR FLOW OF THIXOTROPIC MORTARS
BS EN 13395-3:2002 Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability Test for flow of repair concrete
BS EN 13395-4:2002 Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability Application of repair mortar overhead
BS EN 13396:2004 Products and systems for the protection and repair of concrete structures. Test methods. Measurement of chloride ion ingress
EN 13584:2003 Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep in compression for repair products
UNI EN 1504-10 : 2005 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS - REQUIREMENTS - QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
04/30109196 DC : DRAFT FEB 2004 EN 14879 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE
BS EN 12617-4:2002 Products and systems for the protection and repair of concrete structures. Test methods Determination of shrinkage and expansion
BS EN 12192-1:2002 Products and systems for the protection and repair of concrete structures. Granulometry analysis Test method for dry components of premixed mortar
BS EN 13687-4:2002 Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility Dry thermal cycling
BS EN 13395-1:2002 Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability Test for flow of thixotropic mortars
BS EN 13584:2003 Products and systems for the protection and repair of concrete structures. Test methods. Determination of creep in compression for repair products
BS EN 13295:2004 Products and systems for the protection and repair of concrete structures.Test methods. Determination of resistance to carbonation
BS EN 13057:2002 Products and systems for the protection and repair of concrete structures. Test methods. Determination of resistance of capillary absorption
EN 13687-1:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion
EN 13687-2:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock)
EN 13687-4:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 4: Dry thermal cycling
DIN EN 13295:2004-08 Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to carbonation
BS EN 13687-1:2002 Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility Freeze-thaw cycling with de-icing salt immersion
EN 12192-1:2002 Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar
EN 13395-2:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 2: Test for flow of grout or mortar
EN 13395-4:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 4: Application of repair mortar overhead

EN 934-1:2008 Admixtures for concrete, mortar and grout - Part 1: Common requirements
EN 13396:2004 Products and systems for the protection and repair of concrete structures - Test methods - Measurement of chloride ion ingress
EN 520:2004+A1:2009 Gypsum plasterboards - Definitions, requirements and test methods
EN ISO 11358-1:2014 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014)
EN 1504-10:2017 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works
EN 197-1:2011 Cement - Part 1: Composition, specifications and conformity criteria for common cements
EN 13529:2003 Products and systems for the protection and repair of concrete structures - Test methods - Resistance to severe chemical attack
EN 1015-17:2000/A1:2004 METHODS OF TEST FOR MORTAR FOR MASONRY - PART 17: DETERMINATION OF CHLORIDE CONTENT OF FRESH MORTARS
EN 12190:1998 Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar
ISO 1716:2010 Reaction to fire tests for products Determination of the gross heat of combustion (calorific value)
EN 13687-2:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock)
EN 480-14:2006 Admixtures for concrete, mortar and grout - Test methods - Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test
EN 1542:1999 Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off
EN 1767:1999 Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis
EN 13057:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption
EN 13395-2:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 2: Test for flow of grout or mortar
EN 13036-4:2011 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
ISO 11925-2:2010 Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
EN ISO 1182:2010 Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010)
EN 13295:2004 Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to carbonation
EN 1015-11 : 1999 AMD 1 2006 METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR
EN 13501-2:2016 Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services
EN ISO 3251:2008 Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008)
EN ISO 9514:2005 Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2005)
ISO 1182:2010 Reaction to fire tests for products Non-combustibility test
EN 14647:2005/AC:2006 CALCIUM ALUMINATE CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
EN 13823:2010+A1:2014 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
EN 14306:2015 Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification
EN 1877-2:2000 Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 2: Determination of amine functions using the total basicity number
EN 13412:2006 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression
EN ISO 9239-1:2010 Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010)
EN 12620:2002+A1:2008 Aggregates for concrete
ISO 390:1993 Products in fibre-reinforced cement Sampling and inspection
EN 12192-1:2002 Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar
EN 1504-2:2004 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
ISO 11358:1997 Plastics Thermogravimetry (TG) of polymers General principles
EN ISO 12696:2016 Cathodic protection of steel in concrete (ISO 12696:2016)
CEN/TS 12390-9:2016 Testing hardened concrete - Part 9: Freeze-thaw resistance with de-icing salts - Scaling
ISO 2812-1:2017 Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water
EN 12617-4:2002 Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion
EN 13395-3:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 3: Test for flow of repair concrete
ISO 3251:2008 Paints, varnishes and plastics Determination of non-volatile-matter content
EN 1877-1:2000 Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 1: Determination of epoxy equivalent
EN 1504-1:2005 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions
EN 1504-8:2016 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality control and Assessment and verification of the constancy of performance (AVCP)
ISO 9239-1:2010 Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source
EN 13055-1:2002/AC:2004 LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT
EN 13687-1:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion
EN 13584:2003 Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep in compression for repair products
EN 1766:2017 Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing
ISO 9514:2005 Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing
EN 13395-4:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 4: Application of repair mortar overhead
EN ISO 1716:2010 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010)
EN 1770:1998 Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion
ISO 12696:2016 Cathodic protection of steel in concrete
EN 13687-4:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 4: Dry thermal cycling
EN 14487-1:2005 Sprayed concrete - Part 1: Definitions, specifications and conformity
EN ISO 11925-2:2010/AC:2011 REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST
EN 1504-9:2008 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems
EN 13395-1:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 1: Test for flow of thixotropic mortars
EN 13294:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.