|
EN 13864:2004
|
Surfaces for sports areas - Determination of tensile strength of synthetic yarns
|
|
EN 12235:2013
|
Surfaces for sports areas - Determination of vertical ball behaviour
|
|
ISO 13934-1:2013
|
Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method
|
|
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories
|
|
EN 13744 : 2004
|
SURFACES FOR SPORTS AREAS - PROCEDURE FOR ACCELERATED AGEING BY IMMERSION IN HOT WATER
|
|
EN 13672 : 2004
|
SURFACES FOR SPORTS AREAS - DETERMINATION OF RESISTANCE TO ABRASION OF NON-FILLED SYNTHETIC TURF
|
|
ISO 4919:2012
|
Carpets — Determination of tuft withdrawal force
|
|
EN 12229:2014
|
Surfaces for sports areas - Procedure for the preparation of synthetic turf and needle-punch test pieces
|
|
EN 14808:2005
|
Surfaces for sports areas - Determination of shock absorption
|
|
EN ISO 13934-1:2013
|
Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013)
|
|
ISO 8543:1998
|
Textile floor coverings Methods for determination of mass
|
|
EN 13036-4:2011
|
Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
|
|
EN 1097-3:1998
|
Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
|
|
ISO 11357-3:2011
|
Plastics Differential scanning calorimetry (DSC) Part 3: Determination of temperature and enthalpy of melting and crystallization
|
|
EN 15306:2014
|
Surfaces for outdoor sports areas - Exposure of synthetic turf to simulated wear
|
|
EN 14809:2005/AC:2007
|
SURFACES FOR SPORTS AREAS - DETERMINATION OF VERTICAL DEFORMATION
|
|
EN 12228:2013
|
Surfaces for sports areas - Determination of joint strength of synthetic surfaces
|
|
EN 933-1:2012
|
Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
|
|
EN 1969 : 2000
|
SURFACES FOR SPORTS AREAS - DETERMINATION OF THICKNESS OF SYNTHETIC SPORTS SURFACES
|
|
EN 13817:2004
|
SURFACES FOR SPORTS AREAS - PROCEDURE FOR ACCELERATED AGEING BY EXPOSURE TO HOT AIR
|
|
EN 12234:2013
|
Surfaces for sports areas - Determination of ball roll behaviour
|
|
EN 430:1994
|
Resilient floor coverings - Determination of mass per unit area
|
|
EN 13036-7:2003
|
Road and airfield surface characteristics - Test methods - Part 7: Irregularity measurement of pavement courses : the straightedge test
|
|
EN 20105-A02 : 1994
|
TEXTILES - TESTS FOR COLOUR FASTNESS - PART A02: GREYSCALE FOR ASSESSING CHANGE IN COLOUR (ISO 105-A02:1993)
|
|
EN 12230:2003
|
Surfaces for sports areas - Determination of tensile properties of synthetic sports surfaces
|
|
ISO 105-A02:1993
|
Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour
|
|
EN 12616:2013
|
Surfaces for sports areas - Determination of water infiltration rate
|
|
EN 14955:2005
|
Surfaces for sports areas - Determination of composition and particle shape of unbound mineral surfaces for outdoor sports areas
|
|
ISO 48:2010
|
Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)
|
|
EN 15301-1:2007
|
Surfaces for sports areas - Part 1: Determination of rotational resistance
|
|
ISO 1763:1986
|
Carpets Determination of number of tufts and/or loops per unit length and per unit area
|
