PREN 2043 : 200P1

Superseded View Superseded By

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Add to Watchlist What is StandardsWatch?

This Standard has been added successfully to your Watchlist.
Please visit My Watchlist to see all standards that you are watching.

You need to be logged in to add this standard to your Watchlist.
Please log in now or create an account to add.

We could not add this standard to your Watchlist.
Please retry or contact support for assistance.

You have already added this standard to your Watchlist.
Visit My Watchlist to view the full list.

AEROSPACE SERIES - METALLIC MATERIALS - GENERAL REQUIREMENTS FOR SEMI-FINISHED PRODUCT QUALIFICATION (EXCLUDING FORGINGS AND CASTINGS)

Available format(s): Hardcopy, PDF

Language(s): English

Published date:

Publisher: Aerospace & Defence Industries Association of Europe

Table of Contents - (Show below) - (Hide below)

0 Introduction
1 Scope
2 Normative references
3 Definitions
4 Quality assurance

Abstract - (Show below) - (Hide below)

Defines general requirements for semi-finished product qualification of EN metallic materials (excluding forgings and castings).

General Product Information - (Show below) - (Hide below)

Published
Document Type	Draft
Status	Superseded
Publisher	Aerospace & Defence Industries Association of Europe
Pages
ISBN
Committee	C5
Superseded By	EN 2043 : 2013
Comment Closes On

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NF EN 2043 : 2014	Identical
DIN EN 2043 : 2013	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

I.S. EN 3161:2007	AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED, SOLUTION TREATED AND PRECIPITATION TREATED, BAR A OR D <= 200 MM, R[M] >= 930 MPA
I.S. EN 4655:2010	AEROSPACE SERIES - STEEL FE-PM1506 (X1CRNIMOALTI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BARS - A OR D <= 200 MM - R[M] >= 1400 MPA
I.S. EN 3120:2012	AEROSPACE SERIES - TITANIUM ALLOY TI-P64003 - COLD WORKED AND STRESS RELIEVED - SEAMLESS TUBE FOR PRESSURE SYSTEMS - 4 MM <= D <= 51 MM - 690 MPA <= R[M] <= 1030 MPA
I.S. EN 4671:2010	AEROSPACE SERIES - STEEL FE-PM1506 (X1CRNIMOALTI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1400 MPA
I.S. EN 4659:2010	AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1650 MPA
I.S. EN 4463:2007
I.S. EN 4672:2011	AEROSPACE SERIES - STEEL FE-PM1504 (X1CRNIMOALTI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM
I.S. EN 3359:2007	AEROSPACE SERIES - STEEL FE-PM1503 (X3CRNIMOAL13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM
XP PREN 4258 : 1996 XP	AEROSPACE SERIES - METALLIC MATERIALS - GENERAL ORGANIZATION OF STANDARDIZATION - LINKS BETWEEN TYPES OF EN STANDARDS AND THEIR USE
I.S. EN 3365:2007	AEROSPACE SERIES - STEEL FE-PM3901 (X15CRNI17-3) - AIR MELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM
XP PREN 4347 : 1996 XP	AEROSPACE SERIES - STEEL FE-PM1506 (X3CRNIMOAL13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D =< 300 MM
XP PREN 4346 : 1996 XP	AEROSPACE SERIES - STEEL FE-PM1505 (X1CRNIMOALTI12-9-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D =< 300 MM
I.S. EN 4500-004:2012	AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 004: SPECIFIC RULES FOR TITANIUM AND TITANIUM ALLOYS
PREN 2184 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2301 (NICR21FE18MO9) - SOLUTION TREATED - BAR AND SECTION - D[E] <= 200 MM
PREN 2202 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1303 (NICO20CR20MO5TI2AL) - SOLUTION TREATED - SEAMLESS TUBE - D <= 50 MM, A <= 3 MM
PREN 2199 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1303 (NICO20CR20MO5TI2AL) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 200 MM
PREN 2486 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2618A - FORGING STOCK
PREN 2539 : 200P2	AEROSPACE SERIES - STEEL FE-PM 3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 200 MM - R[M] >= 965 MPA
PREN 2278 : 1	AEROSPACE SERIES - STEEL X12CRNIMOV12-3 (1.4933) - 900 MPA <= R[M] <= 1100 MPA - BARS - D[E] <= 150 MM
PREN 2203 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1303 (NICO20CR20MO5TI2AL) - SOLUTION TREATED - SHEET, STRIP AND PLATE - 0,2 MM <= A <= 10 MM
PREN 2407 : 200P1	AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (NICR19FE19NB5MO3) - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET, STRIP AND PLATE - 0,2 MM <= A <= 10 MM
I.S. EN 3364:2007	AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK A OR D <= 300 MM
PREN 2773 : 200P2	AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU 17-4) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP - A <= 6 MM - R[M] >= 1310 MPA
I.S. EN 2818:2009	AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1070 MPA
PREN 3160 : 200P1	AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 200 MM - R[M] >= 1310 MPA
PREN 4573 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 100 MM
PREN 4628 : 200P2	AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA
PREN 2469 : 200P1	AEROSPACE SERIES - STEEL FE-PA3901 (X1CRNI18-10) - AIR MELTED - SOFTENED - WIRES - 0,4 <= D <= 12,5 MM - 450 MPA <= R[M] <= 650 MPA
PREN 3161 : 200P1	AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 200 MM - R[M] >= 930 MPA
PREN 2663 : 200P2	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - SOLUTION TREATED - SHEET, STRIP AND PLATE - 0,2 MM <= A <= 10 MM
PREN 2813 : 200P2	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P6061-T6 - DRAWN TUBE FOR PRESSURE APPLICATIONS - 0,6 MM <= A <= 12,5 MM
PREN 2213 : 200P1	AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - BARS - D[E] <= 16 MM - 980 MPA <= R[M] <= 1180 MPA
PREN 2185 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2301 (NICR21FE18MO9) - SOLUTION TREATED - SHEET, STRIP AND PLATE - 0,2 MM <= A <= 10 MM
PREN 4330 : 200P1	AEROSPACE SERIES - STEEL FE-WA4802 (X8CRNIMN27-22-2) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4317 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2601 (X6NICRTIMOV26-15) - NON HEAT TREATED - FORGING STOCK - A OR D <= 200 MM
PREN 4331 : 200P1	AEROSPACE SERIES - STEEL FE-WL1804 (25CRMNMO4-2-2) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4343 : 200P1	AEROSPACE SERIES - STEEL FE-WM1001 (X13CR12) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4222 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1305 (NICR22CO13MO9AI1) - AIR MELTED AND VACUUM REFINED - ANNEALED - SHEET AND STRIP - 0,25 MM <= A <= 3 MM
PREN 2119 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2601 (X6NICRTIMOV26-15) - SOLUTION TREATED AND PRECIPITATION TREATED - WIRES FOR RIVETS - 2 MM <= D <= 10 MM - R[M] >= 960 MPA
PREN 4528 : 200P1	AEROSPACE SERIES - STEEL FE-PA3903 (X10CRNI18-8) - COLD ROLLED - STRIP FOR SPRINGS A <= 3 MM 1250 MPA <= RM <= 1640 MPA
PREN 2178 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2501 (X4NICRMOTI43-13) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 200 MM
PREN 4371 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PD9001 (NICU31) - NON HEAT TREATED - BAR FOR RIVETS - D <= 10 MM
PREN 4380 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - SOLUTION TREATED - BAR AND SECTION - D[E] <= 200 MM
PREN 2763 : 200P3
PREN 2817 : 200P3
PREN 3018 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2801 (NICR16FE7TI3NB1AI1) - CONSUMABLE ELECTRODE REMELTED - COLD DRAWN WIRE FOR THE MANUFACTURE OF THREAD INSERTS - D <= 3 MM
PREN 4346 : 200P1	AEROSPACE SERIES - STEEL FE-PM1505 (X1CRNIMOALTI12-9-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM
PREN 4375 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1301 (NICR19CO18MO4TI3AL3) - NON HEAT TREATED - FORGING STOCK - A OR D <= 250 MM
PREN 4335 : 200P1	AEROSPACE SERIES - STEEL FE-WA2602 (X4NICRTIMOV26-15) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4288 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7050 - FORGING STOCK
PREN 4326 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY CO-WH4102 (COCR28W20NI5V1) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4287 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7010 - FORGING STOCK
PREN 4289 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7175 - FORGING STOCK
PREN 4262 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - AS FORGED - FORGING STOCK - A OR D <= 200 MM - 690 MPA <= R[M] <= 880 MPA
PREN 4333 : 200P1	AEROSPACE SERIES - STEEL FE-WA4902 (X5CRNICOMOWMN21-20-20-3-3-2) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4314 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2602 (X4NICRTIMOV26-15) - NON HEAT TREATED - FORGING STOCK - A OR D <= 250 MM
PREN 4569 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY CO-PH4101 (COCR20W15NI) - VACUUM MELTED - SOLUTION TREATED - WIRE - D <= 4 MM
PREN 4575 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - SOLUTION TREATED AND DESCALED - SHEET AND PLATE - 3 MM < A <= 50 MM
PREN 2959 : 200P2	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1302 (NICR20CO13MO4TI3AL) - SOLUTION TREATED AND COLD WORKED - BAR FOR FORGED FASTENERS - 3 MM <= D <= 30 MM
PREN 3120 : 200P3	AEROSPACE SERIES - TITANIUM ALLOY TI-P64003 - COLD WORKED AND STRESS RELIEVED - SEAMLESS TUBE FOR PRESSURE SYSTEMS - 4 MM <= D <= 51 MM - 690 MPA <= R[M] <= 1030 MPA
XP PREN 3527 : 1996 XP	AEROSPACE SERIES - STEEL FE-PL1504 (33CRMOV12) - AIR MELTED - ANNEALED - FORGING STOCK - A OR D LESS THAN OR EQUAL TO 100MM
PREN 3364 : 200P3	AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM
PREN 2538 : 200P3	AEROSPACE SERIES - STEEL FE-PM 3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP - A <= 6 MM - R[M] >= 1310 MPA
PREN 3162 : 200P1	AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP - A <= 6 MM - R[M] >= 930 MPA
PREN 2485 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2214 - FORGING STOCK
PREN 3671 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - NON HEAT TREATED - FORGING STOCK - A OR D <= 250 MM
PREN 3531 : 200P2	AEROSPACE SERIES - STEEL FE-PM2701 (X2NICOMO18-8-5) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP - A <= 6 MM - 1750 MPA <= R[M] <= 2000 MPA
PREN 3490 : 200P2
PREN 3487 : 200P2	AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED - BAR FOR MACHINING - A OR D <= 250 MM - 500 MPA <= R[M] <= 700 MPA
PREN 3638 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2601 (X6NICRTIMOV26-15) - CONSUMABLE ELECTRODE REMELTED - SOLUTION AND PRECIPITATION TREATED - SHEET, STRIP AND PLATE - 0,5 MM <= A <= 10 MM
PREN 3524 : 200P2	AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - SHEET AND STRIP - 2 MM <= A <= 6 MM - 1080 MPA <= R[M] <= 1280 MPA
PREN 2402 : 200P1	AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NICR20CO3FE3 - ANNEALED - WIRE - D <= 10 MM
PREN 2815 : 200P3
PREN 2917 : 200P2	AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 200 MM - R[M] >= 1 070 MPA
PREN 2947 : 200P2	AEROSPACE SERIES - STEEL FE-PA3004 (X10CRNI18-09) - AIR MELTED - NON HEAT TREATED - COLD DRAWN WIRE - A OR D <= 2,3 MM
PREN 2475 : 200P1
PREN 2774 : 200P2	AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU 17-4) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 200 MM - R[M] >= 1310 MPA
PREN 2540 : 200P1	AEROSPACE SERIES - STEEL FE-PM3902 (X7CRNIAL17-7) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION HARDENED - SHEET AND STRIP - A <= 6 MM - 1240 MPA <= R[M] <= 1450 MPA
PREN 2662 : 200P2	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - ANNEALED - SHEET, STRIP AND PLATE - 0,2 MM <= A <= 10 MM
PREN 3163 : 200P1	AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM
PREN 2821 : 200P2
PREN 2915 : 200P2	AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 200 MM - R[M] >= 965 MPA
PREN 3532 : 200P2	AEROSPACE SERIES - STEEL FE-PM2701 (X2NICOMO18-8-5) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - PLATE - 6 MM < A <= 40 MM - 1750 MPA <= R[M] <= 2000 MPA
PREN 3521 : 200P2
PREN 3553 : 200P2	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2618A - T6511 - EXTRUDED BAR AND SECTION A OR D <= 160 MM
PREN 3321 : 200P2	AEROSPACE SERIES - TITANIUM ALLOY TI-P65001 - AS FORGED - GRADE 1 FORGING STOCK, FOR SOLUTION TREATED AND AGED FORGINGS - A OR D <= 360 MM
PREN 3476 : 200P2	AEROSPACE SERIES - STEEL FE-PL1501 (30CRMO12) - AIR MELTED - SOFTENED - FORGING STOCK - A OR D <= TO 300 MM
I.S. EN 4500-003:2012	AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 003: SPECIFIC RULES FOR HEAT RESISTING ALLOYS
PREN 3459 : 200P2	AEROSPACE SERIES - TITANIUM ALLOY TI-P63001 - SOLUTION TREATED AND AGED - PLATE - 6 MM < A <= 50 MM
PREN 3523 : 200P2
PREN 3509 : 200P2	AEROSPACE SERIES - STEEL FE-PL1501 (30CRMO12) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 40 MM = 1050 MPA <= R[M] <= 1250 MPA
PREN 3516 : 200P2	AEROSPACE SERIES - STEEL FE-PL8201 (41NICRMO2) - AIR MELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM
PREN 3477 : 200P3	AEROSPACE SERIES - STEEL FE-PM3503 (X7CRNIMO15-7-3) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - PLATE - 6 MM < A <= 15 MM - 1310 MPA <= R[M] <= 1550 MPA
PREN 3528 : 200P2	AEROSPACE SERIES - STEEL FE-PM2701 (X2NICOMO18-8-5) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 150 MM - 1750 MPA <= R[M] <= 2000 MPA
PREN 3359 : 200P2	AEROSPACE SERIES - STEEL FE-PM1503 (X3CRNIMOAL 13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM
PREN 3378 : 200P2	AEROSPACE SERIES - TITANIUM TI-P99002 - ANNEALED - WIRE FOR RIVET - 1,6 MM <= D <= 10 MM
PREN 3668 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2301 (NICR21FE18MO9) - NON HEAT TREATED - FORGING STOCK - A OR D <= 250 MM
PREN 3526 : 200P2	AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - SHEET AND STRIP - 0,5 MM <= A <= 6 MM - 980 MPA <= R[M] <= 1180 MPA
I.S. EN 4384:2007	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-CH1303 (NICO20CR20MO5TI2AL) - NON HEAT TREATED - REMELTING STOCK
PREN 3361 : 200P3	AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP - A <= 6 MM - 1 070 MPA <= R[M] <= 1 220 MPA
PREN 3357 : 200P2	AEROSPACE SERIES - STEEL FE-PM1503 (X3CRNIMOAL 13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR FOR MACHINING - A OR D <= 150 MM - 1 200 MPA <= R[M] <= 1 400 MPA
PREN 3358 : 200P3
PREN 3508 : 200P2
PREN 4671 : 200P1	AEROSPACE SERIES - STEEL FE-PM1506 (X1CRNIMOALTI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - FORGINGS - A OR D <= 200 MM - R[M] >= 1400 MPA
PREN 4657 : 200P1	AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - BARS - A OR D <= 200 MM - R[M] >= 1650 MPA
PREN 4264 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2501 (X4NICRMOTI43-13) - AS FORGED - FORGING STOCK - A OR D <= 200 MM
PREN 4324 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-W42201 - FILLER METAL FOR WELDING - ROD
PREN 3972 : 200P1
PREN 4329 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH0001 (NICR20) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4337 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH8901 (NICR16TI3MN2) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4332 : 200P1	AEROSPACE SERIES - STEEL FE-WL1805 (8CRMNMO12-4-9) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4336 : 200P1	AEROSPACE SERIES - STEEL FE-WA3801 (X4CRNIMN20-10-2) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4347 : 200P1	AEROSPACE SERIES - STEEL FE-PM1506 (X3CRNIMOAL13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM
PREN 4370 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1701 (NICR15CO14AL5TI4MO4) - NON HEAT TREATED - FORGING STOCK - A OR D <= 100 MM
PREN 4378 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2601 (NICR19FE19NB5MO3) - SOLUTION TREATED AND PRECIPITATION TREATED - WIRE FOR RIVETS - D <= 1,6 MM
PREN 4376 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2601 (NICR19FE19NB5MO3) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 200 MM
PREN 4382 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - SOLUTION TREATED - SEAMLESS TUBES - FOR HYDRAULIC APPLICATION - D <= 50 MM, A <= 3 MM
PREN 4461 : 200P1
PREN 4511 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2301 (NICR22FEMO) - SOLUTION TREATED AND COLD WORKED - WIRE FOR RIVETS - 1,6 MM <= D <= 10 MM
PREN 4567 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY CO-PH4101 (COCR20W15NI) - VACUUM MELTED - SOLUTION TREATED - BAR AND SECTION - A OR D <= 100 MM
PREN 4571 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - SOLUTION TREATED - BAR AND SECTION - D[E] <= 100 MM
PREN 4088 : 200P1	AEROSPACE SERIES - STEEL FE-PL5101 (13MOCRNIV4-4-3-1) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - CARBURIZED, HARDENED, SUB-ZERO TREATED AND TEMPERED - BAR FOR MACHINING - D[E] <= 30 MM - 1315 MPA <= R[M] <= 1650 MPA
PREN 4093 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3901 (NICR25MO10) - AIR MELTED AND VACUUM REFINED - ANNEALED - SHEET, STRIP AND PLATE - A > 3 MM
PREN 3346 : 200P2	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2014A-T3 - DRAWN TUBE FOR STRUCTURAL APPLICATIONS - 0,6 MM <= A <= 12,5 MM
PREN 3365 : 200P2	AEROSPACE SERIES - STEEL FE-PM3901 (X15CRNI17-3) - AIR MELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM
PREN 4274 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P6082 - T6511 - EXTRUDED BAR AND SECTION - A OR D <= 200 MM WITH PERIPHERAL COARSE GRAIN CONTROL
PREN 4282 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2219 - T37 - PLATE - 6 MM < A <= 40 MM
PREN 4273 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P6082 - T6511 - EXTRUDED BAR AND SECTION - A OR D <= 200 MM
PREN 4290 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2219 - FORGING STOCK
PREN 4258 : 1995	AEROSPACE SERIES - METALLIC MATERIALS - GENERAL ORGANIZATION OF STANDARDIZATION - LINKS BETWEEN TYPES OF EN STANDARDS AND THEIR USE
PREN 4658 : 200P1	AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - FORGINGS - A OR D <= 200 MM - R[M] >= 1520 MPA
PREN 4721 : DRAFT 2012	AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED AND ELECTROSLAG REMELTED (ESR) - HARDENED AND TEMPERED - BAR - D[E] <=200 MM - 900 MPA <= R[M] <= 1050 MPA
PREN 4659 : 200P1	AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - FORGINGS - A OR D <= 200 MM - R[M] >= 1650 MPA
PREN 4275 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7075 - T76511 - EXTRUDED BAR AND SECTION - A OR D <= 100 MM WITH PERIPHERAL COARSE GRAIN CONTROL
PREN 4318 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2601 (X6NICRTIMOV26-15) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 100 MM - R[M] >= 960 MPA
PREN 4341 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-W46431 - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4369 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1701 (NICR15CO14AL5TI4MO4) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 100 MM
PREN 4462 : 200P1
PREN 4328 : 200P1	AEROSPACE SERIES - STEEL FE-WM1601 (X18CRWNI13-3-2) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4338 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH3902 (NICR25MO10C) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4545 : 200P1	AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - PLATE - 20 MM <= A <= 50 MM - 1080 MPA <= R[M] <= 1280 MPA
PREN 4467 : 200P1
I.S. EN 4347:2007	AEROSPACE SERIES STEEL FE-PM1506 (X3CRNIMOAL13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED, SOFTENED, FORGING STOCK A OR D <= 300 MM
PREN 3994 : 200P1	AEROSPACE SERIES - STEEL FE-CM1501 (X13CRNIMOCO12-3-2-2) - NON HEAT TREATED - REMELTING STOCK
PREN 3816 : 200P1	AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED AND COLD ROLLED - SHEET AND STRIP - A <= 3 MM - R[M] >= 800 MPA
PREN 4720 : DRAFT 2012	AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED AND ELECTROSLAG REMELTED (ESR) - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA
PREN 4263 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - AS FORGED - FORGING STOCK - A OR D <= 200 MM - 690 MPA <= R[M] <= 960 MPA
PREN 3460 : 200P2	AEROSPACE SERIES - TITANIUM TI-P99002 - ANNEALED - BAR FOR MATCHING - A OR D <= 150 MM - R[M] >= 390 MPA
PREN 3479 : 200P3	AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - PLATE - 6 MM < A <= 20 MM - 1070 MPA <= R[M] <= 1220 MPA
PREN 3512 : 200P2	AEROSPACE SERIES - STEEL FE-PL1801 (100CR6) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - HARDENED AND TEMPERED - HOLLOW BARS FOR THE MANUFACTURER OF BEARINGS - 3,5 MM <= A <= 55 MM
PREN 3525 : 200P2	AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - PLATE - 6 MM < A <= 20 MM - 1080 MPA <= R[M] <= 1280 MPA
PREN 3680 : 200P1	AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOLUTION TREATED - SEAMLESS TUBE FOR PRESSURE APPLICATIONS - D <= 50 MM; 0,5 MM <= A <= 5 MM - 500 MPA <= R[M] <= 750 MPA
PREN 4656 : 200P1	AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - BARS - A OR D <= 200 MM - R[M] >= 1520 MPA
PREN 4500-004 : 200P2	AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 004: SPECIFIC RULES FOR TITANIUM AND TITANIUM ALLOYS
PREN 4325 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH1302 (NICR20CO13MO4TI3AI) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4334 : 200P1	AEROSPACE SERIES - STEEL FE-WL1806 (15CRMNMOV5-4-9-3) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4340 : 200P1	AEROSPACE SERIES - MAGNESIUM ALLOY MG-W68001 - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4377 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2601 (NICR19FE19NB5MO3) - NON HEAT TREATED - FORGING STOCK - A OR D <= 300 MM
PREN 4383 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-CH2601 (NICR19FE19NB5MO3) - NON HEAT TREATED - REMELTING STOCK
PREN 4463 : 200P1
PREN 4568 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY CO-PH4101 (COCR20W15NI) - VACUUM MELTED - SOLUTION TREATED - SHEET AND STRIP - A <= 6 MM
PREN 3969 : 200P1	AEROSPACE SERIES - STEEL FE-PL1507 (40CRMOV12) - AIR MELTED - ANNEALED - FORGING STOCK - A OR D <= 350 MM
PREN 4292 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-R39002 - FORGING STOCK
PREN 4344 : 200P1	AEROSPACE SERIES - STEEL FE-WM1002 (X13CR13) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4373 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PD9001 (NICU31) - ANNEALED - SEAMLESS TUBE - D <= 75 MM, A <= 3 MM
PREN 4094 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-CH1305 (NICR16CO10MO8A14TI4) - VACUUM MELTED - NON HEAT TREATED - REMELTING
PREN 4469 : 200P1
PREN 3510 : 200P2	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2602 (X4NICRTIMOV26-15) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 100 MM
PREN 4500-005 : 200P2	AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 005: SPECIFIC RULES FOR STEELS
PREN 3527 : 200P2	AEROSPACE SERIES - STEEL FE-PL1504 (33CRMOV12) - AIR MELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM
PREN 3679 : 200P1	AEROSPACE SERIES - STEEL FE-PM3902 (X7CRNIAL17-7) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION HARDENED - PLATE - 6 MM < A <= 15 MM - 1240 MPA <= R[M] <= 1450 MPA
PREN 4374 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1301 (NICR19CO18MO4TI3AL3) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 200 MM
PREN 4384 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-CH1303 (NICO20CR20MO5TI2AL) - NON HEAT TREATED - REMELTING STOCK
PREN 4468 : 200P1
PREN 2175 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2602 (X4NICRTIMOV26-15) - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET, STRIP AND PLATE - 0,5 MM <= A <= 10 MM - R[M] >= 850 MPA
PREN 4381 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - SOLUTION TREATED - SEAMLESS TUBES - FOR STRUCTURAL APPLICATION - D <= 50 MM, A <= 3 MM
PREN 4672 : 200P1	AEROSPACE SERIES - STEEL FE-PM1504 (X1CRNIMOALTI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM
PREN 4655 : 200P1	AEROSPACE SERIES - STEEL FE-PM1506 (X1CRNIMOALTI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - BARS - A OR D <= 200 MM - R[M] >= 1400 MPA
PREN 4339 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY CO-WH4001 (COCR29W9) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4572 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - SOLUTION TREATED - SHEET AND STRIP - A <= 3 MM
PREN 4315 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2601 (X6NICRTIMOV26-15) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - A OR D <= 100 MM - R[M] >= 900 MPA
PREN 4327 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY CO-WH1401 (COCR26NI11W8) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4342 : 200P1	AEROSPACE SERIES - TITANIUM TI-W99001 - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 3974 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH8001 (NICR20TI) - ANNEALED - SEAMLESS DRAWN CAPILLARY TUBE - 0,6 MM <= D <= 2,0 MM
PREN 3991 : 200P1	AEROSPACE SERIES - STEEL FE-PA2801 (X60NIMNCR13-5-3) - NON HEAT TREATED - FORGING STOCK - A OR D <= 350 MM
PREN 4368 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-CD1701 (NICO15CR10AL6TI5MO3) - NON HEAT TREATED - REMELTING STOCK
PREN 4670 : 200P1	AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM
PREN 3989 : 200P1
PREN 4092 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3901 (NICR25MO10) - AIR MELTED AND VACUUM REFINED - ANNEALED - SHEET AND STRIP - 0,25 MM <= A <= 3 MM
PREN 3971 : 200P1	AEROSPACE SERIES - STEEL FE-PL1507 (40CRMOV12) - CONSUMABLE ELECTRODE REMELTED - ANNEALED - FORGING STOCK - A OR D <= 350 MM
PREN 4096 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY - NI-CD1401 (NICO10210CR9A16TA3) - VACUUM MELTED - NON HEAT TREATED - REMELTING STOCK
PREN 3511 : 200P2	AEROSPACE SERIES - STEEL FE-PL1801 (100CR6) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - BAR FOR THE MANUFACTURE OF MACHINED BEARINGS - A OR D <= 130 MM
PREN 3557 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P6061-T4 - DRAWN TUBE FOR PRESSURE APPLICATIONS - 0,6 MM <= A <= 3,0 MM
PREN 3990 : 200P1	AEROSPACE SERIES - STEEL FE-PA2801 (X60NIMNCR13-5-3) - SOFTENED - BAR FOR MACHINING - D[E] <= 150 MM - 620 MPA <= R[M] <= 900 MPA
PREN 4500-001 : 200P2	AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES
PREN 4500-003 : 200P2	AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 003: SPECIFIC RULES FOR HEAT RESISTING SLLOYS
PREN 4642 : 200P1	AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED - HARDENED AND TEMPERED - SHEET AND PLATE - 0,6 MM <= A <= 50 MM - 900 MPA <= RM <= 1050 MPA
PREN 4207 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P8090 - T89 - EXTRUDED BAR AND SECTION - A OR D <= 15 MM WITH PERIPHERAL COARSE GRAIN CONTROL
PREN 4089 : 200P1	AEROSPACE SERIES - STEEL FE-PL5101 (13MOCRNIV4-4-3-1) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOFTENED - FORGING STOCK - A OR D <= 150 MM
DIN EN 2959:2000-03 (Draft)	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1302 (NICR20CO13MO4TI3AL), SOLUTION TREATED AND COLD WORKED - BAR FOR FORGED FASTENERS 3 MM = D = 30 MM
PREN 4086 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PD2101 (NICO14B5TI2) - NON HEAT TREATED - FORGING STOCK A OR D <= 360 MM
I.S. EN 4500-005:2012	AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 005: SPECIFIC RULES FOR STEELS
I.S. EN 4657:2010	AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - BARS - A OR D <= 200 MM - R[M] >= 1650 MPA
I.S. EN 4656:2010	AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BARS - A OR D <= 200 MM - R[M] >= 1520 MPA
I.S. EN 4628:2013	AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA
I.S. EN 4262:2013	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - AS FORGED - FORGING STOCK - A OR D <= 200 MM - 690 MPA <= R[M] <= 880 MPA
I.S. EN 3361:2007	AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP A <= 6 MM - 1070 MPA <= R[M] <= 1220 MPA
I.S. EN 2213:2012	AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - BARS - D[E] <= 16 MM - 980 MPA <= R[M] <= 1180 MPA
I.S. EN 2817:2009	AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR FOR MACHINING - A OR D <= 200 MM - R[M] >= 1070 MPA
I.S. EN 4467:2007
I.S. EN 3163:2007	AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED, SOFTENED, FORGING STOCK A OR D <= 300 MM
I.S. EN 3469:2009	AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1310 MPA
I.S. EN 4500-001:2012	AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES
I.S. EN 4670:2010	AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM
I.S. EN 3528:2013	AEROSPACE SERIES - STEEL X2NICOMO18-8-5 (1.6359) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 150 MM - 1750 MPA <= R[M] <= 2000 MPA
I.S. EN 3459:2010	AEROSPACE SERIES - TITANIUM ALLOY TI-P63001 (TI-4AL-4MO-2SN) - SOLUTION TREATED AND AGED - PLATE - 6 MM < A <= 50 MM
I.S. EN 4263:2013	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - AS FORGED - FORGING STOCK - A OR D <= 200 MM - 690 MPA <= R[M] <= 960 MPA
I.S. EN 4462:2007
I.S. EN 4468:2007
I.S. EN 4658:2010	AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1520 MPA
I.S. EN 2815:2009	AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR FOR MACHINING - A OR D <= 200 MM - R[M] >= 965 MPA
I.S. EN 4469:2007
I.S. EN 4461:2007
DIN EN 3018:1997-12 (Draft)	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2801 (NICR16FE7TI3NBAL1) CONSUMABLE ELECTRODE REMELTED - COLD DRAWN WIREFOR THE MANUFACTURE OF THREAD INSERTS D <= 3 MM
I.S. EN 3162:2007	AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP A <= 6 MM - R[M] >= 930 MPA
I.S. EN 4346:2007	AEROSPACE SERIES - STEEL FE-PM1505 (X1CRNIMOALTI12-9-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED, SOFTENDED, FORGING STOCK A OR D <= 300 MM
I.S. EN 3160:2007	AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED, SOLUTION TREATED AND PRECIPITATION TREATED, BAR A OR D <= 200 MM, R[M] >= 1310 MPA
I.S. EN 4642:2009	AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED - HARDENED AND TEMPERED - SHEET AND PLATE - 0,6 MM <= A <= 50 MM - 900 MPA <= R[M] <= 1050 MPA
I.S. EN 3487:2007	AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED - BAR FOR MACHINING - A OR D <= 250 MM - 500 MPA <= R[M] <= 700 MPA
BS EN 4628 : 2013	AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA
11/30242528 DC : DRAFT JAN 2011	BS EN 4628 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED - HARDENED AND TEMPERED - BAR D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA
06/30146139 DC : 0	EN 2465 - AEROSPACE SERIES - STEEL FE-PA3901 (X2CRNI18.9) - SOFTENED 450 -RM - 680 MPA - BAR FOR MACHINING, 4 - DE - 100
BS EN 4382 : 2006	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) SOLUTION TREATED - SEAMLESS TUBES - FOR HYDRAULIC APPLICATION - D <= 50 MM, A <= 3 MM
BS EN 3364 : 2007	AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED, SOFTENED, FORGING STOCK A OR D <= 300 MM
BS EN 4671 : 2010	AEROSPACE SERIES - STEEL FE-PM1506 (X1CRNIMOALTI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1400 MPA
BS EN 4659 : 2010	AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1650 MPA
BS EN 3120 : 2012	AEROSPACE SERIES - TITANIUM ALLOY TI-P64003 - COLD WORKED AND STRESS RELIEVED - SEAMLESS TUBE FOR PRESSURE SYSTEMS - 4 MM <= D <= 51 MM - 690 MPA <= R[M] <= 1030 MPA
BS EN 3525 : 2007	AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - PLATE - 6 MM < A <= 20 MM - 1080 MPA <= R[M] <= 1280 MPA
BS EN 4642 : 2009	AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED - HARDENED AND TEMPERED - SHEET AND PLATE - 0,6 MM <= A <= 50 MM - 900 MPA <= R[M] <= 1050 MPA
BS EN 4383 : 2006	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-CH2601 (NICR19FE19NB5MO3) - NON HEAT TREATED - REMELTING STOCK
BS EN 4262 : 2013	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - AS FORGED - FORGING STOCK - A OR D <= 200 MM - 690 MPA <= R[M] <= 880 MPA
BS EN 3969 : 2006	AEROSPACE SERIES - STEEL FE-PL1507 (40CRMOV12) - AIR MELTED - ANNEALED - FORGING STOCK - A OR D <= 350 MM
BS EN 4672 : 2011	AEROSPACE SERIES - STEEL FE-PM1504 (X1CRNIMOALTI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM
12/30263035 DC : 0	BS EN 4825 - AEROSPACE SERIES - STEEL X12CRNIMOV12-3 (1.4933) - AIR MELTED AND CONSUMABLE ELECTRODE REMELTED - HARDENED AND TEMPERED - BAR - D[E] <= 150 MM - 900 MPA <= R[M] <= 1100 MPA
BS EN 4469 : 2007	AEROSPACE SERIES - STEEL FE-PM1505 (X1CRNIMOALTI12-9-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 150 MM - R[M] >= 1400 MPA
06/30146136 DC : 0	EN 2573 - AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18.10) - RM - 780 MPA 0,25 - DE - 3 MM
BS EN 3638 : 2007	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2601 (X6NICRTIMOV26-15) - CONSUMABLE ELECTRODE REMELTED - SOLUTION AND PRECIPITATION TREATED - SHEET, STRIP AND PLATE - 0,5 MM <= A <= 10 MM
BS EN 3527 : 2007	AEROSPACE SERIES - STEEL FE-PL1504 (33CRMOV12) - AIR MELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM
06/30146146 DC : 0	EN 4628 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED HARDENED AND TEMPERED BAR - DE = 150 MM 1 100 MPA = RM = 1 300 MPA
BS EN 3476 : 2006	AEROSPACE SERIES - STEEL FE-PL1501 (30CRMO12) - AIR MELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM
BS EN 4500-001 : 2012	AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES
BS EN 4462 : 2007
BS EN 2815 : 2009	AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR FOR MACHINING - A OR D <= 200 MM - R[M] >= 965 MPA
06/30146957 DC : 0	EN 3488 - AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18.10) - AIR MELTED SOFTENED SHEET AND STRIP A = 6 MM 500 = RM = 700 MPA
BS EN 3487 : 2007	AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED - BAR FOR MACHINING - A OR D <= 250 MM - 500 MPA <= R[M] <= 700 MPA
10/30239354 DC : 0	BS EN 4720 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED AND ELECTROSLAG REMELTED (ESR) - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA
BS EN 3459 : 2010	AEROSPACE SERIES - TITANIUM ALLOY TI-P63001 (TI-4AL-4MO-2SN) - SOLUTION TREATED AND AGED - PLATE - 6 MM < A <= 50 MM
BS EN 3528 : 2013	AEROSPACE SERIES - STEEL X2NICOMO18-8-5 (1.6359) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 150 MM - 1750 MPA <= R[M] <= 2000 MPA
BS EN 4263 : 2013	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - AS FORGED - FORGING STOCK - A OR D <= 200 MM - 690 MPA <= R[M] <= 960 MPA
BS EN 3532 : 2007	AEROSPACE SERIES - STEEL FE-PM2701 (X2NICOMO18-8-5) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - PLATE - 6 MM < A <= 40 MM - 1750 MPA <= R[M] <= 2000 MPA
BS EN 3524 : 2007	AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - SHEET AND STRIP - 2 MM <= A <= 6 MM - 1080 MPA <= R[M] <= 1280 MPA
BS EN 4346 : 2007	AEROSPACE SERIES - STEEL FE-PM1505 (X1CRNIMOALTI12-9-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED, SOFTENED, FORGING STOCK A OR D <= 300 MM
BS EN 3526 : 2007	AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - SHEET AND STRIP - 0,5 MM <= A <= 6 MM - 980 MPA <= R[M] <= 1180 MPA
BS EN 4467 : 2007
BS EN 3671 : 2007	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - NON HEAT TREATED - FORGING STOCK - A OR D <= 250 MM
BS EN 4655 : 2010	AEROSPACE SERIES - STEEL FE-PM1506 (X1CRNIMOALTI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BARS - A OR D <= 200 MM - R[M] >= 1400 MPA
BS EN 3668 : 2006	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2301 (NICR21FE18MO9) - NON HEAT TREATED - FORGING STOCK - A OR D <= 250 MM
BS EN 4373 : 2007	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PD9001 (NICU31) - ANNEALED, SEAMLESS TUBE D <= 75 MM, A <= 3 MM
BS EN 4318 : 2007	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2601 (X6NICRTIMOV26-15) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 100 MM, R[M] >= 960 MPA
BS EN 3490 : 2007	AEROSPACE SERIES - STEEL FE-PM3901 (X15CRNI17-3) - AIR MELTED - HARDENED AND TEMPERED - BAR FOR MACHINING - DE <= 200 MM - 900 MPA <= R[M] <= 1100 MPA
06/30146155 DC : 0	EN 4631 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED HARDENED AND TEMPERED BAR - DE = 200 MM 900 MPA = RM = 1 050 MPA
BS EN 2817 : 2009	AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR FOR MACHINING - A OR D <= 200 MM - R[M] >= 1070 MPA
10/30239356 DC : 0	BS EN 4500-1 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 1: GENERAL RULES
BS EN 4384 : 2007	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-CH1303 (NICO20CR20MO5TI2AL) - NON HEAT TREATED - REMELTING STOCK
BS EN 4657 : 2010	AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - BARS - A OR D <= 200 MM - R[M] >= 1650 MPA
BS EN 2469 : 2007	AEROSPACE SERIES - STEEL FE-PA3901 (X1CRNI18-10) - AIR MELTED - SOFTENED - WIRES - 0,4 MM <= D <= 12,5 MM - 450 MPA <= R[M] <= 650 MPA
BS EN 4315 : 2007	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2601 (X6NICRTIMOV26-15) - SOLUTION TREATED AND PRECIPITATION TREATED, BAR AND SECTION A OR D <= 100 MM, R[M] >= 900 MPA
BS EN 3972 : 2006
10/30239355 DC : 0	BS EN 4721 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED AND ELECTROSLAG REMELTED (ESR)-HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA
BS EN 3816 : 2006	AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED AND COLD ROLLED - SHEET AND STRIP A <= 3 MM - R[M] >= 800 MPA
BS EN 2818 : 2009	AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1070 MPA
BS EN 4317 : 2007	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2601 (X6NICRTIMOV26-15) - NON HEAT TREATED, FORGING STOCK A OR D <= 200 MM
BS EN 3971 : 2006	AEROSPACE SERIES - STEEL FE-PL1507 (40CRMOV12) - CONSUMABLE ELECTRODE REMELTED - ANNEALED - FORGING STOCK - A OR D <= 350 MM
BS EN 4468 : 2007
BS EN 4314 : 2007	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2602 (X4NICRTIMOV26-15) - NON HEAT TREATED, FORGING STOCK A OR D <= 250 MM
BS EN 4461 : 2007
BS EN 3523 : 2007
BS EN 3469 : 2009	AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1310 MPA
12/30263296 DC : 0	BS EN 2278 - AEROSPACE SERIES - STEEL FE-PM1502 (Z12CNDV12) - 900 MPA <= R[M] <= 1100 MPA - BARS - D[E] <= 150 MM
BS EN 3365 : 2007	AEROSPACE SERIES - STEEL FE-PM3901 (X15CRNI17-3) - AIR MELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM
BS EN 3359 : 2007	AEROSPACE SERIES - STEEL FE-PM1503 (X3CRNIMOAL13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED, SOFTENED, FORGING STOCK A OR D <= 300 MM
BS EN 3161 : 2007	AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED, SOLUTION TREATED AND PRECIPITATION TREATED, BAR A OR D <= 200 MM, R[M] >= 930 MPA
BS EN 4347 : 2007	AEROSPACE SERIES - STEEL FE-PM1506 (X3CRNIMOAL13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED, SOFTENED, FORGING STOCK A OR D <= 300 MM
BS EN 4500-003 : 2012	AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 003: SPECIFIC RULES FOR HEAT RESISTING ALLOYS
BS EN 3479 : 2007	AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - PLATE - 6 MM < A <= 20 MM - 1070 MPA <= R[M] <= 1220 MPA
06/30146677 DC : 0	EN 3487 - AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) AIR MELTED SOFTENED BAR FOR MACHINING A OR D - 250 MM 500 - RM - 700 MPA
09/30204515 DC : DRAFT MAY 2009	BS EN 3528 - AEROSPACE SERIES - STEEL FE-PM2701 (X2NICOMO18-8-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - D[E] <= 150 MM - 1750 MPA <= R[M] <= 2000 MPA
BS EN 3531 : 2007	AEROSPACE SERIES - STEEL FE-PM2701 (X2NICOMO18-8-5) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP - A <= 6 MM - 1750 MPA <= RM <= 2000 MPA
10/30239371 DC : 0	BS EN 4293 - AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7175- AL ZN5,5MGCU(B) - T73511 - EXTRUDED BAR AND SECTION A OR D <= 150 MM
BS EN 4500-005 : 2012	AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 005: SPECIFIC RULES FOR STEELS
BS EN 4463 : 2007
BS EN 4292 : 2005	AEROSPACE SERIES - ALUMINIUM ALLOY AL-R39002 - FORGING STOCK
BS EN 2213 : 2012	AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - BARS - D[E] <= 16 MM - 980 MPA <= R[M] <= 1180 MPA
BS EN 3163 : 2007	AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED, SOFTENED, FORGING STOCK A OR D <= 300 MM
BS EN 4658 : 2010	AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1520 MPA
BS EN 3361 : 2007	AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED, SOLUTION TREATED AND PRECIPITATION TREATED, SHEET AND STRIP A <= 6 MM, 1070 MPA <= R[M] <= 1220 MPA
BS EN 3160 : 2007	AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED, SOLUTION TREATED AND PRECIPITATION TREATED, BAR A OR D <= 200 MM, R[M] >= 1310 MPA
BS EN 4656 : 2010	AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BARS - A OR D <= 200 MM - R[M] >= 1520 MPA
BS EN 2947 : 2006	AEROSPACE SERIES - STEEL FE-PA3004 (X10CRNI18-09) - AIR MELTED - NON HEAT TREATED - COLD DRAWN WIRE - A OR D <= 2,3 MM
BS EN 4670 : 2010	AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM
BS EN 3162 : 2007	AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED, SOLUTION TREATED AND PRECIPITATION TREATED, SHEET AND STRIP A <= 6 MM, R[M] >= 930 MPA
BS EN 2821 : 2007
BS EN 4500-004 : 2012	AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 004: SPECIFIC RULES FOR TITANIUM AND TITANIUM ALLOYS
06/30146391 DC : 0	EN 2467 - AEROSPACE SERIES - STEEL FE-PA3901 (X2CRNI18.9) - AIR MELTED SOFTENED PLATE SHEET AND STRIP 0,4 = A = 20 MM 520 = RM = 670 MPA

Standards Referencing This Book - (Show below) - (Hide below)

TR 3040-2 : 7	AEROSPACE SERIES - QUALITY ASSURANCE - EN AEROSPACE PRODUCTS - LIST OF QUALIFIED PRODUCTS
PREN 4258 : 1995	AEROSPACE SERIES - METALLIC MATERIALS - GENERAL ORGANIZATION OF STANDARDIZATION - LINKS BETWEEN TYPES OF EN STANDARDS AND THEIR USE
EN 3042 : 1991	AEROSPACE SERIES - QUALITY ASSURANCE - EN AEROSPACE PRODUCTS - QUALIFICATION PROCEDURE
EN 2000 : 1991	AEROSPACE SERIES - QUALITY ASSURANCE - EN AEROSPACE PRODUCTS - APPROVAL OF THE QUALITY SYSTEM OF MANUFACTURERS

Add To Cart

Product Format

Quantity

add to cart

PREN 2043 : 200P1

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?