PREN 4258 : 1995

Superseded

AEROSPACE SERIES - METALLIC MATERIALS - GENERAL ORGANIZATION OF STANDARDIZATION - LINKS BETWEEN TYPES OF EN STANDARDS AND THEIR USE

Superseded date

12-19-2023

Published date

01-12-2013

Publisher

Aerospace & Defence Industries Association of Europe

0 Introduction
1 Scope
2 Normative references
3 Definitions
4 Description of the types of EN Standards
5 Links between types of EN standards and use
6 Overview
Annex A (normative)
Annex B (normative)
Annex C (normative)

Gives the general organization of metallic material standards, their links with other types of EN standards and their use for aerospace applications. It corresponds to level O.

Committee	C5
DocumentType	Standard
ProductNote	Superseded by EN 4258:1998
PublisherName	Aerospace & Defence Industries Association of Europe
Status	Superseded
SupersededBy	EN 4258:1998 ASD-STAN prEN 4258 P3:2023

PREN 2486 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2618A - FORGING STOCK
PREN 3671 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - NON HEAT TREATED - FORGING STOCK - A OR D <= 250 MM
PREN 3638 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2601 (X6NICRTIMOV26-15) - CONSUMABLE ELECTRODE REMELTED - SOLUTION AND PRECIPITATION TREATED - SHEET, STRIP AND PLATE - 0,5 MM <= A <= 10 MM
PREN 2599 : 200P2	AEROSPACE SERIES - STRIP IN ALUMINIUM AND ALUMINIUM ALLOYS - THICKNESS 0,25 MM <= A <= 3,2 MM - DIMENSIONS
PREN 2681 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY 7010-T74 - HAND AND DIE FORGINGS - A <= 150 MM
PREN 2688 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7050-T74 - DIE FORGINGS - A <= 150 MM
PREN 2683 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7010-T7651 - HAND FORGINGS - A <= 150 MM
PREN 2947 : 200P2	AEROSPACE SERIES - STEEL FE-PA3004 (X10CRNI18-09) - AIR MELTED - NON HEAT TREATED - COLD DRAWN WIRE - A OR D <= 2,3 MM
PREN 2622 : 200P1	AEROSPACE SERIES - CIRCULAR TUBE FOR FLUIDS IN HEAT RESISTING ALLOYS - DIAMETER 3,2 MM <= D <= 100 MM - THICKNESS 0,32 MM <= A <= 2,5 MM - DIMENSIONS
PREN 2718 : 200P2	AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOYS - TEST METHOD - MEASUREMENT OF CIRCUMFERENTIAL RESIDUAL STRESS IN CIRCULAR TUBES WITH A RATIO D/A >= 10
PREN 3346 : 200P2	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2014A-T3 - DRAWN TUBE FOR STRUCTURAL APPLICATIONS - 0,6 MM <= A <= 12,5 MM
PREN 3365 : 200P2	AEROSPACE SERIES - STEEL FE-PM3901 (X15CRNI17-3) - AIR MELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM
PREN 2086 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2618A - T851 - HAND FORGINGS - A <= 150 MM
PREN 4274 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P6082 - T6511 - EXTRUDED BAR AND SECTION - A OR D <= 200 MM WITH PERIPHERAL COARSE GRAIN CONTROL
PREN 4282 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2219 - T37 - PLATE - 6 MM < A <= 40 MM
PREN 4273 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P6082 - T6511 - EXTRUDED BAR AND SECTION - A OR D <= 200 MM
PREN 4275 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7075 - T76511 - EXTRUDED BAR AND SECTION - A OR D <= 100 MM WITH PERIPHERAL COARSE GRAIN CONTROL
PREN 4318 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2601 (X6NICRTIMOV26-15) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 100 MM - R[M] >= 960 MPA
PREN 4341 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-W46431 - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4285 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2219 - T851 - FORGINGS - A <= 400 MM
PREN 4369 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1701 (NICR15CO14AL5TI4MO4) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 100 MM
PREN 4328 : 200P1	AEROSPACE SERIES - STEEL FE-WM1601 (X18CRWNI13-3-2) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4338 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH3902 (NICR25MO10C) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4500-6 : 200P1	AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 6: SPECIFIC RULES FOR FILLER METALS FOR BRAZING
PREN 3874 : 200P1	AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE FORCE-CONTROLLED LOW CYCLE FATIGUE TESTING
PREN 3988 : 200P1	AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE STRAIN-CONTROLLED LOW CYCLE FATIGUE TESTING
PREN 4095 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY - NI-CH1305 (NICR16CO10MO8A14TI4) - VACUUM MELTED - NON HEAT TREATED - PRECISION CASTINGS
PREN 4063 : 200P2	AEROSPACE SERIES - WIRE - IN FILLER METAL FOR BRAZING - DIAMETER 0.6 MM <= D <= 4 MM - DIMENSIONS
PREN 3878 : 200P1	AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - BRAZE ALLOYS - FLEXIBILITY TEST
PREN 3994 : 200P1	AEROSPACE SERIES - STEEL FE-CM1501 (X13CRNIMOCO12-3-2-2) - NON HEAT TREATED - REMELTING STOCK
PREN 4216 : 200P1	AEROSPACE SERIES - STEEL FE-CM3801 (GX5CRNICUNB16-4) - HOMOGENIZED, SOLUTION TREATED AND PRECIPITATION HARDENED - INVESTMENT CASTING - D[E] <= 50 MM - R[M] >= 900 MPA
PREN 3816 : 200P1	AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED AND COLD ROLLED - SHEET AND STRIP - A <= 3 MM - R[M] >= 800 MPA
PREN 4263 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - AS FORGED - FORGING STOCK - A OR D <= 200 MM - 690 MPA <= R[M] <= 960 MPA
PREN 2003-10 : 200P1	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TEST METHODS - PART 10: SAMPLING FOR DETERMINATION OF HYDROGEN CONTENT
PREN 3460 : 200P2	AEROSPACE SERIES - TITANIUM TI-P99002 - ANNEALED - BAR FOR MATCHING - A OR D <= 150 MM - R[M] >= 390 MPA
PREN 3467 : 200P2	AEROSPACE SERIES - TITANIUM ALLOY TI-C64001 - NOT HEAT TREATED - REMELTING STOCK - D[E] <= 300 MM
PREN 3479 : 200P3	AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - PLATE - 6 MM < A <= 20 MM - 1070 MPA <= R[M] <= 1220 MPA
PREN 3680 : 200P1	AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOLUTION TREATED - SEAMLESS TUBE FOR PRESSURE APPLICATIONS - D <= 50 MM; 0,5 MM <= A <= 5 MM - 500 MPA <= R[M] <= 750 MPA
PREN 4267 : 200P1	AEROSPACE SERIES - ROUND BAR IN TITANIUM AND TITANIUM ALLOYS - DIAMETER 6 MM <= D <= 160 MM - DIMENSIONS
PREN 4277 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7175 - T73 - HAND AND DIE FORGINGS - A <= 125 MM
PREN 4325 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH1302 (NICR20CO13MO4TI3AI) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4334 : 200P1	AEROSPACE SERIES - STEEL FE-WL1806 (15CRMNMOV5-4-9-3) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4340 : 200P1	AEROSPACE SERIES - MAGNESIUM ALLOY MG-W68001 - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 3877 : 200P1	AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - DETERMINATION OF SOLIDUS AND LIQUIDUS TEMPERATURES BY DIFFERENTIAL THERMAL ANALYSIS OF BRAZE ALLOYS
PREN 4377 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2601 (NICR19FE19NB5MO3) - NON HEAT TREATED - FORGING STOCK - A OR D <= 300 MM
PREN 4383 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-CH2601 (NICR19FE19NB5MO3) - NON HEAT TREATED - REMELTING STOCK
PREN 3973 : 200P1	AEROSPACE SERIES - STEEL FE-CM3801 (X5CRNICUNB16-4) - HOMOGENIZED, SOLUTION TREATED AND PRECIPITATION HARDENED - INVESTMENT CASTING - D[E] <= 50 MM - R[M] >= 1 030 MPA
PREN 3969 : 200P1	AEROSPACE SERIES - STEEL FE-PL1507 (40CRMOV12) - AIR MELTED - ANNEALED - FORGING STOCK - A OR D <= 350 MM
PREN 3982 : 200P2	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7050-T7451 - PLATE - 6 MM < A <= 160 MM
PREN 4000 : 200P2	AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR THE DRAFTING AND PRESENTATION OF DIMENSIONAL STANDARDS FOR METALLIC SEMI-FINISHED PRODUCTS
PREN 3876 : 200P1	AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - BRAZE ALLOYS - FUSION TEST
PREN 4344 : 200P1	AEROSPACE SERIES - STEEL FE-WM1002 (X13CR13) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4373 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PD9001 (NICU31) - ANNEALED - SEAMLESS TUBE - D <= 75 MM, A <= 3 MM
PREN 3992 : 200P1	AEROSPACE SERIES - STEEL FE-PA2801 (X60NIMNCR13-5-3) - SOFTENED - FORGINGS - D[E] <= 150 MM - 620 MPA <= R[M] <= 900 MPA
PREN 4064 : 200P2	AEROSPACE SERIES - TAPE IN FILLER METAL FOR BRAZING - THICKNESS 0,075 MM <= A <= 1,5 MM - DIMENSIONS
PREN 4066 : 200P2	AEROSPACE SERIES - BORIDED FOIL IN FILLER METAL FOR BRAZING - THICKNESS 25 MICRO M LESS THAN OR EQUAL TO A LESS THAN OR EQUAL TO 100 MICRO M - DIMENSIONS
PREN 4087 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PD2101 (NICO14NB5TI2) - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - D[E] <= 75 MM R[M] >= 1210 MPA
PREN 4094 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-CH1305 (NICR16CO10MO8A14TI4) - VACUUM MELTED - NON HEAT TREATED - REMELTING
PREN 4409 : 200P1	AEROSPACE SERIES - SQUARE BARS, EXTRUDED IN ALUMINIUM AND ALUMINIUM ALLOYS - THICKNESS 6 MM <= A <= 200 MM - DIMENSIONS
PREN 4448 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7050-T7452 - DIE FORGINGS - A <= 150 MM
PREN 4522 : 200P1	AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PIN-TYPE BEARING TEST OF YIELD STRENGTH
10/30239363 DC : 0	BS EN 4500-5 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 5: SPECIFIC RULES FOR STEELS
BS EN 3678:2007	Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 930 MPa
10/30239356 DC : 0	BS EN 4500-1 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 1: GENERAL RULES
PREN 2256 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2618A - T852 - HAND FORGINGS - A <= 150 MM
PREN 2617 : 200P1	AEROSPACE SERIES - PLATE IN TITANIUM AND TITANIUM ALLOYS - THICKNESS 6 MM < A <= 100 MM - DIMENSIONS
PREN 4262 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - AS FORGED - FORGING STOCK - A OR D <= 200 MM - 690 MPA <= R[M] <= 880 MPA
PREN 4333 : 200P1	AEROSPACE SERIES - STEEL FE-WA4902 (X5CRNICOMOWMN21-20-20-3-3-2) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4375 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1301 (NICR19CO18MO4TI3AL3) - NON HEAT TREATED - FORGING STOCK - A OR D <= 250 MM
PREN 4410 : 200P1	AEROSPACE SERIES - RECTANGULAR BARS, EXTRUDED IN ALUMINIUM AND ALUMINIUM ALLOYS - THICKNESS 6 MM <= A <= 160 MM - DIMENSIONS
PREN 4314 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2602 (X4NICRTIMOV26-15) - NON HEAT TREATED - FORGING STOCK - A OR D <= 250 MM
XP PREN 3527 : 1996 XP	AEROSPACE SERIES - STEEL FE-PL1504 (33CRMOV12) - AIR MELTED - ANNEALED - FORGING STOCK - A OR D LESS THAN OR EQUAL TO 100MM
PREN 3364 : 200P3	AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM
PREN 3352 : 200P2	AEROSPACE SERIES - TITANIUM ALLOY TI-C64001 - INVESTMENT CASTING - HOT ISOSTATIC PRESSED - A < 30 MM - R[M] >= 880 MPA
PREN 3162 : 200P1	AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP - A <= 6 MM - R[M] >= 930 MPA
PREN 2382 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2214 - T6 - HAND AND DIE FORGINGS - A <= 100 MM
PREN 2485 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2214 - FORGING STOCK
PREN 3506 : 200P1	AEROSPACE SERIES - HOT ROLLED SHEETS AND PLATES IN HEAT RESISTING ALLOYS - THICKNESS 2,0 MM <= A <= 100 MM - DIMENSIONS
PREN 3322 : 200P2	AEROSPACE SERIES - TITANIUM ALLOY TI-P65001 - SOLUTION TREATED AND AGED - GRADE 1 - FORGINGS - D[E] <= 75 MM
PREN 3361 : 200P3	AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP - A <= 6 MM - 1 070 MPA <= R[M] <= 1 220 MPA
PREN 4264 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2501 (X4NICRMOTI43-13) - AS FORGED - FORGING STOCK - A OR D <= 200 MM
PREN 4324 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-W42201 - FILLER METAL FOR WELDING - ROD
PREN 4329 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH0001 (NICR20) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4337 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH8901 (NICR16TI3MN2) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4332 : 200P1	AEROSPACE SERIES - STEEL FE-WL1805 (8CRMNMO12-4-9) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4336 : 200P1	AEROSPACE SERIES - STEEL FE-WA3801 (X4CRNIMN20-10-2) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4370 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1701 (NICR15CO14AL5TI4MO4) - NON HEAT TREATED - FORGING STOCK - A OR D <= 100 MM
PREN 4378 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2601 (NICR19FE19NB5MO3) - SOLUTION TREATED AND PRECIPITATION TREATED - WIRE FOR RIVETS - D <= 1,6 MM
PREN 4379 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - SOLUTION TREATED - FORGING - D[E] <= 200 MM
PREN 4376 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2601 (NICR19FE19NB5MO3) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 200 MM
PREN 4382 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - SOLUTION TREATED - SEAMLESS TUBES - FOR HYDRAULIC APPLICATION - D <= 50 MM, A <= 3 MM
PREN 4411 : 200P1	AEROSPACE SERIES - SHEET, COLD ROLLED IN STEEL - THICKNESS 0,5 MM <= A <= 3,0 MM - DIMENSIONS
PREN 4097 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY - NI-CD1401 (NICO10W10CR9AI6TA3) - VACUUM MELTED - PRECIPITATION TREATED - PRECISION CASTINGS
PREN 3972 : 200P1
PREN 2043 : 200P1	AEROSPACE SERIES - METALLIC MATERIALS - GENERAL REQUIREMENTS FOR SEMI-FINISHED PRODUCT QUALIFICATION (EXCLUDING FORGINGS AND CASTINGS)
PREN 3993 : 200P1	AEROSPACE SERIES - STEEL FE-CM1501 (X13CRNIMOCO12-3-2-2) - HARDENED AND TEMPERED - PRECISION AND SAND CASTINGS - D[E] <= 150 MM - R[M] >= 925 MPA
PREN 4088 : 200P1	AEROSPACE SERIES - STEEL FE-PL5101 (13MOCRNIV4-4-3-1) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - CARBURIZED, HARDENED, SUB-ZERO TREATED AND TEMPERED - BAR FOR MACHINING - D[E] <= 30 MM - 1315 MPA <= R[M] <= 1650 MPA
PREN 4093 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3901 (NICR25MO10) - AIR MELTED AND VACUUM REFINED - ANNEALED - SHEET, STRIP AND PLATE - A > 3 MM
10/30239357 DC : 0	BS EN 4500-3 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 3: SPECIFIC RULES FOR HEAT RESISTING ALLOYS
I.S. EN 2137:2017	AEROSPACE SERIES - STEEL FE-PL75 - 1100 MPA <= R[M] <= 1250 MPA - BARS - DE <= 100 MM
XP PREN 4000 : 1998 XP	AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR THE DRAFTING AND PRESENTATION OF DIMENSIONAL STANDARDS FOR METALLIC SEMI-FINISHED PRODUCTS
PREN 3875 : 200P2	AEROSPACE SERIES - METALLIC MATERIALS - FILLER METAL FOR BRAZING - TECHNICAL SPECIFICATION
PREN 4276 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7175 - T7351 - HAND FORGINGS - A <= 150 MM
PREN 4260 : 200P1	AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF TECHNICAL SPECIFICATIONS
PREN 3018 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2801 (NICR16FE7TI3NB1AI1) - CONSUMABLE ELECTRODE REMELTED - COLD DRAWN WIRE FOR THE MANUFACTURE OF THREAD INSERTS - D <= 3 MM
PREN 2007 : 200P1	AEROSPACE SERIES - TEST METHODS FOR ALUMINIUM AND ALUMINIUM ALLOY PRODUCTS - METALLOGRAPHIC DETERMINATION OF CLADDING THICKNESS AND COPPER DIFFUSION IN THE CLADDING FOR ROLLED PRODUCTS
PREN 4335 : 200P1	AEROSPACE SERIES - STEEL FE-WA2602 (X4NICRTIMOV26-15) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4288 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7050 - FORGING STOCK
PREN 4326 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY CO-WH4102 (COCR28W20NI5V1) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4287 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7010 - FORGING STOCK
PREN 4289 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7175 - FORGING STOCK
PREN 3459 : 200P2	AEROSPACE SERIES - TITANIUM ALLOY TI-P63001 - SOLUTION TREATED AND AGED - PLATE - 6 MM < A <= 50 MM
PREN 3469 : 200P3	AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1310 MPA
PREN 3315 : 200P2	AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 - SOLUTION TREATED AND AGED - FORGINGS - D[E] <= 75 MM
PREN 3378 : 200P2	AEROSPACE SERIES - TITANIUM TI-P99002 - ANNEALED - WIRE FOR RIVET - 1,6 MM <= D <= 10 MM
PREN 3668 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2301 (NICR21FE18MO9) - NON HEAT TREATED - FORGING STOCK - A OR D <= 250 MM
PREN 4086 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PD2101 (NICO14B5TI2) - NON HEAT TREATED - FORGING STOCK A OR D <= 360 MM
PREN 4098 : 200P1	AEROSPACE SERIES - STEEL FE-PL1507 (40CRMOV12) - REMELTED - HARDENED AND TEMPERED - FORGINGS - D[E] <= 50 MM - 1250 MPA <= R[M] <= 1400 MPA
PREN 4061 : 200P2	AEROSPACE SERIES - AMORPHOUS FOIL IN FILLER METAL FOR BRAZING - THICKNESS 25 MICRO M LESS THAN OR EQUAL TO A LESS THAN OR EQUAL TO 64 MICRO M - DIMENSIONS
PREN 4090 : 200P1	AEROSPACE SERIES - STEEL FE-PL5101 (13MOCRNIV4-4-3-1) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - CARBURIZED, HARDENED, SUB-ZERO TREATED AND TEMPERED - FORGINGS D[E] <= 30 MM - 1315 MPA <= R[M] <= 1650 MPA
DIN EN 3018:1997-12 (Draft)	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2801 (NICR16FE7TI3NBAL1) CONSUMABLE ELECTRODE REMELTED - COLD DRAWN WIREFOR THE MANUFACTURE OF THREAD INSERTS D <= 3 MM
EN 4347:2007	Aerospace series Steel FE-PM1506 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm
PREN 2686 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7010-T7451 - HAND FORGINGS - A <= 150 MM
PREN 2386 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7075 - T7352 - HAND FORGINGS - A <= 150 MM
PREN 2344 : 200P1	AEROSPACE SERIES - ROUND BARS, MACHINED IN HEAT RESISTING ALLOYS - DIAMETER 10 MM <= D <= 180 MM - DIMENSIONS
PREN 3983 : 200P2	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7050-T7651 - PLATE - 6 MM < A <= 160 MM
PREN 4272 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2219 - T854 - DIE FORGINGS - A <= 200 MM
PREN 4278 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7175 - T7352 - HAND AND DIE FORGINGS - A <= 150 MM
PREN 4330 : 200P1	AEROSPACE SERIES - STEEL FE-WA4802 (X8CRNIMN27-22-2) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4294 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7175 - T7354 - DIE FORGINGS - A <= 150 MM
PREN 4284 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2219 - T852 - FORGINGS - A <= 400 MM
PREN 4331 : 200P1	AEROSPACE SERIES - STEEL FE-WL1804 (25CRMNMO4-2-2) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4343 : 200P1	AEROSPACE SERIES - STEEL FE-WM1001 (X13CR12) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4222 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1305 (NICR22CO13MO9AI1) - AIR MELTED AND VACUUM REFINED - ANNEALED - SHEET AND STRIP - 0,25 MM <= A <= 3 MM
PREN 4371 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PD9001 (NICU31) - NON HEAT TREATED - BAR FOR RIVETS - D <= 10 MM
PREN 4380 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - SOLUTION TREATED - BAR AND SECTION - D[E] <= 200 MM
TR 2410 : 2	AEROSPACE SERIES - METALLIC MATERIALS - RELATIONSHIP BETWEEN DIMENSIONAL STANDARDS AND MATERIAL STANDARDS
PREN 3553 : 200P2	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2618A - T6511 - EXTRUDED BAR AND SECTION A OR D <= 160 MM
PREN 3321 : 200P2	AEROSPACE SERIES - TITANIUM ALLOY TI-P65001 - AS FORGED - GRADE 1 FORGING STOCK, FOR SOLUTION TREATED AND AGED FORGINGS - A OR D <= 360 MM
PREN 4500-2 : 200P1	AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 2: SPECIFIC RULES FOR ALUMINIUM, ALUMINIUM ALLOYS AND MAGNESIUM ALLOYS
PREN 4089 : 200P1	AEROSPACE SERIES - STEEL FE-PL5101 (13MOCRNIV4-4-3-1) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOFTENED - FORGING STOCK - A OR D <= 150 MM
I.S. EN 4700-005:2010	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
09/30196632 DC : 0	BS EN 8.4325 - AEROSPACE SERIES - STEEL FE-WM 3504 (X4CRNIMO16-5-1) - AIR MELTED FILLER METAL FOR WELDING
BS EN 4347:2007	Aerospace series. Steel FE-PM1506 (X3CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm
01/716046 DC : 0	PREN 4800-8 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 8: PRE-PRODUCTION AND PRODUCTION CASTINGS
01/716045 DC : 0	PREN 4800-7 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 7: RE-MELTING STOCK
10/30239371 DC : 0	BS EN 4293 - AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7175- AL ZN5,5MGCU(B) - T73511 - EXTRUDED BAR AND SECTION A OR D <= 150 MM
EN 3671 : 2007	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - NON HEAT TREATED - FORGING STOCK - A OR D <= 250 MM
EN 3678 : 2007	AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - RM >= 930 MPA
EN 2137:2017	Aerospace series - Steel FE-PL75 - 1 100 MPa ≤ Rm ≤ 1 250 MPa - Bars - De ≤ 100 mm
PREN 3161 : 200P1	AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 200 MM - R[M] >= 930 MPA
PREN 2663 : 200P2	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - SOLUTION TREATED - SHEET, STRIP AND PLATE - 0,2 MM <= A <= 10 MM
PREN 2682 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7010-T7452 - HAND AND DIE FORGINGS - A <= 150 MM
PREN 2383 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2214 - T4 - HAND AND DIE FORGINGS - A <= 100 MM
PREN 2540 : 200P1	AEROSPACE SERIES - STEEL FE-PM3902 (X7CRNIAL17-7) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION HARDENED - SHEET AND STRIP - A <= 6 MM - 1240 MPA <= R[M] <= 1450 MPA
PREN 2662 : 200P2	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - ANNEALED - SHEET, STRIP AND PLATE - 0,2 MM <= A <= 10 MM
PREN 3510 : 200P2	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2602 (X4NICRTIMOV26-15) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 100 MM
PREN 3679 : 200P1	AEROSPACE SERIES - STEEL FE-PM3902 (X7CRNIAL17-7) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION HARDENED - PLATE - 6 MM < A <= 15 MM - 1240 MPA <= R[M] <= 1450 MPA
PREN 4062 : 200P2	AEROSPACE SERIES - ROLLED FOIL IN FILLER METAL FOR BRAZING - THICKNESS A <= 1 MM - DIMENSIONS
PREN 4374 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1301 (NICR19CO18MO4TI3AL3) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 200 MM
PREN 4384 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-CH1303 (NICO20CR20MO5TI2AL) - NON HEAT TREATED - REMELTING STOCK
PREN 3114-1 : 200P1	AEROSPACE SERIES - TEST METHOD - MICROSTRUCTURE OF (ALPHA + BETA) TITANIUM ALLOY - WROUGHT PRODUCTS - PART 1: GENERAL REQUIREMENTS
PREN 2033 : 2	AEROSPACE SERIES - STRIPS, COLD ROLLED IN STEEL - THICKNESS 0,1 MM <= A <= 2,5 MM - DIMENSIONS
PREN 4381 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - SOLUTION TREATED - SEAMLESS TUBES - FOR STRUCTURAL APPLICATION - D <= 50 MM, A <= 3 MM
PREN 4339 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY CO-WH4001 (COCR29W9) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4261 : 200P1	AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF TEST METHOD STANDARDS
PREN 4315 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2601 (X6NICRTIMOV26-15) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - A OR D <= 100 MM - R[M] >= 900 MPA
PREN 4327 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY CO-WH1401 (COCR26NI11W8) - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 4342 : 200P1	AEROSPACE SERIES - TITANIUM TI-W99001 - FILLER METAL FOR WELDING - WIRE AND ROD
PREN 3974 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH8001 (NICR20TI) - ANNEALED - SEAMLESS DRAWN CAPILLARY TUBE - 0,6 MM <= D <= 2,0 MM
PREN 4368 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-CD1701 (NICO15CR10AL6TI5MO3) - NON HEAT TREATED - REMELTING STOCK
PREN 3991 : 200P1	AEROSPACE SERIES - STEEL FE-PA2801 (X60NIMNCR13-5-3) - NON HEAT TREATED - FORGING STOCK - A OR D <= 350 MM
PREN 4060 : 200P1	AEROSPACE SERIES - FILLER RODS AND FILLER WIRES FOR WELDING IN HEAT RESISTING ALLOYS - DIAMETER 0,5 <= D <= 5,0 MM - DIMENSIONS
PREN 3989 : 200P1
PREN 4058 : 200P1	AEROSPACE SERIES - FILLER RODS AND FILLER WIRES FOR WELDING IN TITANIUM AND TITANIUM ALLOYS - DIAMETER 0,5 MM <= D <= 5,0 MM - DIMENSIONS
PREN 4092 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3901 (NICR25MO10) - AIR MELTED AND VACUUM REFINED - ANNEALED - SHEET AND STRIP - 0,25 MM <= A <= 3 MM
PREN 3971 : 200P1	AEROSPACE SERIES - STEEL FE-PL1507 (40CRMOV12) - CONSUMABLE ELECTRODE REMELTED - ANNEALED - FORGING STOCK - A OR D <= 350 MM
PREN 4059 : 200P1	AEROSPACE SERIES - FILLER RODS AND FILLER WIRES FOR WELDING IN STEEL - DIAMETER 0,5 MM <= D <= 5,0 MM - DIMENSIONS
PREN 2078 : 2	AEROSPACE SERIES - METALLIC MATERIALS - MANUFACTURING SCHEDULE, INSPECTION SCHEDULE, INSPECTION AND TEST REPORT - DEFINITION, GENERAL PRINCIPLES, PREPARATION AND APPROVAL
PREN 4096 : 200P1	AEROSPACE SERIES - HEAT RESISTING ALLOY - NI-CD1401 (NICO10210CR9A16TA3) - VACUUM MELTED - NON HEAT TREATED - REMELTING STOCK
PREN 3842 : 200P1	AEROSPACE SERIES - CIRCULAR TUBE FOR FLUIDS IN CORROSION RESISTANT STEEL - DIAMETER 3,2 MM <= D <= 100 MM - THICKNESS 0,32 MM <= A <= 2,5 MM - DIMENSIONS
PREN 3557 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P6061-T4 - DRAWN TUBE FOR PRESSURE APPLICATIONS - 0,6 MM <= A <= 3,0 MM
PREN 3990 : 200P1	AEROSPACE SERIES - STEEL FE-PA2801 (X60NIMNCR13-5-3) - SOFTENED - BAR FOR MACHINING - D[E] <= 150 MM - 620 MPA <= R[M] <= 900 MPA
PREN 4400-3 : 200P1	AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 3: BAR AND SECTION
I.S. EN 4462:2007
13/30290101 DC : 0	BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
10/30239500 DC : 0	BS EN 4500-4 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 4: SPECIFIC RULES FOR TITANIUM AND TITANIUM ALLOYS
97/703791 DC : DRAFT FEB 1997	PREN 2951 - AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - MICROGRAPHIC DETERMINATION OF CONTENT OF NON-METALLIC INCLUSIONS

PREN 4260 : 200P1	AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF TECHNICAL SPECIFICATIONS
TR 2410 : 2	AEROSPACE SERIES - METALLIC MATERIALS - RELATIONSHIP BETWEEN DIMENSIONAL STANDARDS AND MATERIAL STANDARDS
PREN 4179 : 200P5	AEROSPACE SERIES - QUALIFICATION AND APPROVAL OF PERSONNEL FOR NON-DESTRUCTIVE TESTING
PREN 2078 : 2	AEROSPACE SERIES - METALLIC MATERIALS - MANUFACTURING SCHEDULE, INSPECTION SCHEDULE, INSPECTION AND TEST REPORT - DEFINITION, GENERAL PRINCIPLES, PREPARATION AND APPROVAL
EN 4268 : 2012	AEROSPACE SERIES - METALLIC MATERIALS - HEAT TREATMENT FACILITIES - GENERAL REQUIREMENTS
PREN 2600 : 200P1	AEROSPACE SERIES - DESIGNATION OF METALLIC SEMI-FINISHED PRODUCTS - RULES
PREN 2043 : 200P1	AEROSPACE SERIES - METALLIC MATERIALS - GENERAL REQUIREMENTS FOR SEMI-FINISHED PRODUCT QUALIFICATION (EXCLUDING FORGINGS AND CASTINGS)
PREN 4261 : 200P1	AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF TEST METHOD STANDARDS
PREN 2032/2 : 1985	METALLIC MATERIALS - CODING OF MATERIAL IN DELIVERY HEAT TREATMENT CONDITIONS
PREN 4000 : 200P2	AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR THE DRAFTING AND PRESENTATION OF DIMENSIONAL STANDARDS FOR METALLIC SEMI-FINISHED PRODUCTS