• There are no items in your cart

PREN 4700-001 : 200P2

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
Available format(s)

Hardcopy , PDF

Withdrawn date

12-22-2023

Language(s)

English

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Wording of order
5 Health and safety
6 Technical requirements

Describes the requirements for the ordering, manufacture, testing, inspection and delivery of steel and heat resisting (Cobalt, Nickel and iron based alloys) alloy plate, sheet and strip. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.

DevelopmentNote
Supersedes PREN 3235-1, PREN 3235-2, PREN 4235-1 and PREN 4235-2. (06/2003)
DocumentType
Draft
Pages
26
ProductNote
Superseded by EN 4700-001:2010
PublisherName
Aerospace & Defence Industries Association of Europe
Status
Withdrawn
SupersededBy
Supersedes

Standards Relationship
NF EN 4700-001 : 2012 Identical

PREN 3480 : 200P2 AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED - PLATE - 6 MM < A <= 50 MM - 500 MPA <= R[M] <= 700 MPA
I.S. EN 3361:2007 AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP A <= 6 MM - 1070 MPA <= R[M] <= 1220 MPA
BS EN 3525:2007 Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Plate. 6 mm ≪ a ≤ 20 mm. 1080 MPa ≤ Rm ≤ 1280 MPa
10/30239363 DC : 0 BS EN 4500-5 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 5: SPECIFIC RULES FOR STEELS
BS EN 4642:2009 Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Sheet and plate. 0,6 mm ≤ a ≤ 50 mm. 900 MPa ≤ Rm ≤ 1050 MPa
BS EN 3488:2007 Aerospace series. Steel FE-PA3601 (X6CrNiTi18-10). Air melted. Softened. Sheet and strip. a ≤ 6 mm. 500 MPa ≤ Rm ≤ 700 MPa
BS EN 4528:2009 Aerospace series. Steel FE-PA 3903 (X10CrNi18-8). Cold rolled. Strip for springs. a ≤ 3 mm. 1250 MPa ≤ Rm ≤ 1640 MPa
BS EN 3329:2009 Aerospace series. Steel FE-PL1503 (35CrMo4). Annealed Sheet and strip. 0,3 mm ≤ a ≤ 2 mm. For prevailing torque nuts
PREN 2467 : 200P1 AEROSPACE SERIES - STEEL FE-PA3901 (X2CRNI18-9) - AIR MELTED - SOFTENED - PLATE, SHEET AND STRIP - 0,4 MM <= A <= 20 MM - 520 MPA <= R[M] <= 670 MPA
BS EN 3524:2007 Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Sheet and strip. 2 mm ≤ a ≤ 6 mm. 1080 MPa ≤ Rm ≤1280 MPa
BS EN 3526:2007 Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Sheet and strip. 0,5 mm ≤ a ≤ 6 mm. 980 MPa ≤ Rm ≤ 1180 MPa
PREN 3488 : 200P2 AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED - SHEET AND STRIP - A <= 6 MM - 500 MPA <= R[M] <= 700 MPA
I.S. EN 3162:2007 AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP A <= 6 MM - R[M] >= 930 MPA
I.S. EN 2467:2007 AEROSPACE SERIES - STEEL FE-PA3901 (X2CRNI18-9) - AIR MELTED - SOFTENED - PLATE, SHEET AND STRIP - 0,4 MM <= A <= 20 MM - 520 MPA <= R[M] <= 670 MPA
BS EN 3532:2007 Aerospace series. Steel FE-PM2701 (X2NiCoMo18-8-5).Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated.Plate. 6 mm < a ≤ 40 mm. 1750 MPa ≤ Rm ≤ 2000 MPa
PREN 4528 : 200P1 AEROSPACE SERIES - STEEL FE-PA3903 (X10CRNI18-8) - COLD ROLLED - STRIP FOR SPRINGS A <= 3 MM 1250 MPA <= RM <= 1640 MPA
I.S. EN 2543:2009 AEROSPACE SERIES - STEEL FE-PL1502 (25CRMO4) - ANNEALED - SHEET AND STRIP - 0,3 MM <= A <= 2 MM - FOR PREVAILING TORQUE NUTS
PREN 4642 : 200P1 AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED - HARDENED AND TEMPERED - SHEET AND PLATE - 0,6 MM <= A <= 50 MM - 900 MPA <= RM <= 1050 MPA
I.S. EN 4528:2009 AEROSPACE SERIES - STEEL FE-PA3903 (X10CRNI18-8) - COLD ROLLED - STRIP FOR SPRINGS - A <= 3 MM - 1250 MPA <= R[M] <= 1640 MPA
I.S. EN 4642:2009 AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED - HARDENED AND TEMPERED - SHEET AND PLATE - 0,6 MM <= A <= 50 MM - 900 MPA <= R[M] <= 1050 MPA
I.S. EN 2209:2008 AEROSPACE SERIES - STEEL FE-PL1502 (25CRMO4) - 900 MPA <= R[M] <= 1100 MPA - SHEETS, STRIPS AND PLATES - 0,5 MM <= A <= 20 MM
I.S. EN 3488:2007 AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED - SHEET AND STRIP - A <= 6 MM - 500 MPA <= R[M] <= 700 MPA
BS EN 3479:2007 Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Plate - 6 mm < a ≤ 20 mm - 1070 MPa ≤ Rm ≤ 1220 MPa
BS EN 3531:2007 Aerospace series. Steel FE-PM2701 (X2NiCoMo18-8-5). Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated. Sheet and strip. a ≤ 6 mm. 1750 MPa ≤ Rm ≤ 2000 MPa
BS EN 2467:2007 Aerospace series. Steel FE-PA3901 (X2CrNi18-9). Air melted. Softened. Plate, sheet and strip. 0,4 mm ≤ a ≤ 20 mm. 520 MPa ≤ Rm ≤ 670 MPa
BS EN 3361:2007 Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted, solution treated and precipitation treated, sheet and strip a ≤ 6mm, 1070 MPa ≤ Rm ≤ 1220 MPa
BS EN 2543:2009 Aerospace series. Steel FE-PL1502 (25CrMo4). Annealed. Sheet and strip. 0,3 mm ≤ a ≤ 2 mm. For prevailing torque nuts
BS EN 2209:2008 Aerospace series. Steel FE-PL1502 (25CrMo4). 900 MPa ≤ Rm ≤ 1100 MPa. Sheets, strips and plates. 0,5 mm ≤ a ≤ 20 mm
BS EN 3162:2007 Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, sheet and strip a ≤ 6 mm, Rm ≥ 930 MPa
EN 3526:2007 Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 0,5 mm ≤ a ≤ 6 mm - 980 MPa ≤ Rm ≤ 1 180 MPa
EN 3524:2007 Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 2 mm ≤ a ≤ 6 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa
EN 3488:2007 AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED - SHEET AND STRIP - A <= 6 MM - 500 MPA <= R[M] <= 700 MPA
EN 3531 : 2007 AEROSPACE SERIES - STEEL FE-PM2701 (X2NICOMO18-8-5) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP - A <= 6 MM - 1750 MPA <= R[M] <= 2000 MPA
EN 2543 : 2009 AEROSPACE SERIES - STEEL FE-PL1502 (25CRMO4) - ANNEALED - SHEET AND STRIP - 0,3 MM <= A <= 2 MM - FOR PREVAILING TORQUE NUTS
EN 2209 : 2008 AEROSPACE SERIES - STEEL FE-PL1502 (25CRMO4) - 900 MPA <= R[M] <= 1100 MPA - SHEETS, STRIPS AND PLATES - 0,5 MM <= A <= 20 MM
EN 4642:2009 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Sheet and plate - 0,6 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
EN 3525:2007 Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Plate - 6 mm < a ≤ 20 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa
EN 3532 : 2007 AEROSPACE SERIES - STEEL FE-PM2701 (X2NICOMO18-8-5) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - PLATE - 6 MM < A <= 40 MM - 1750 MPA <= [RM] <= 2000 MPA
EN 2467:2007 AEROSPACE SERIES - STEEL FE-PA3901 (X2CRNI18-9) - AIR MELTED - SOFTENED - PLATE, SHEET AND STRIP - 0,4 MM <= A <= 20 MM - 520 MPA <= R[M] <= 670 MPA
EN 3361:2007 Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted, solution treated and precipitation treated, sheet and strip a ≤ 6mm, 1 070 MPa ≤ Rm ≤ 1 220 MPa
EN 3479:2007 Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Plate - 6 mm < a ≤ 20 mm - 1 070 MPa ≤ Rm ≤ 1 220 MPa
EN 4528:2009 Aerospace series - Steel FE-PA3903 (X10CrNi18-8) - Cold rolled - Strip for springs - a ≤ 3 mm - 1 250 MPa ≤ Rm ≤ 1 640 MPa
EN 3329 : 2009 Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0,25 mm < a < 3,2 mm - Dimensions
EN 3638:2007 Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Consumable electrode remelted - Solution and precipitation treated - Sheet, strip and plate - 0,5 mm ≤ a ≤ 10 mm
EN 3816:2006 Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened and cold rolled - Sheet and strip a ≤ 3 mm - Rm ≥ 800 MPa
EN 3162:2007 Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, sheet and strip a ≤ 6 mm, Rm ≥ 930 MPa
EN 3480 : 2007 AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED - PLATE - 6 MM < A <= 50 MM - 500 MPA <= R[M] <= 700 MPA
I.S. EN 3480:2007 AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED - PLATE - 6 MM < A <= 50 MM - 500 MPA <= R[M] <= 700 MPA
PREN 4500-005 : 200P2 AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 005: SPECIFIC RULES FOR STEELS
I.S. EN 3329:2009 AEROSPACE SERIES - STEEL FE-PL1503 (35CRMO4) - ANNEALED - SHEET AND STRIP - 0,3 MM <= A <= 2 MM - FOR PREVAILING TORQUE NUTS
BS EN 3638:2007 Aerospace series. Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Consumable electrode remelted. Solution and precipitation treated. Sheet, strip and plate. 0,5 mm ≤ a ≤ 10 mm
BS EN 3480:2007 Aerospace series. Steel FE-PA3601 (X6CrNiTi18-10). Air melted. Softened. Plate. 6 mm < a ≤ 50 mm. 500 MPa ≤ Rm ≤ 700 MPa
BS EN 3816:2006 Aerospace series. Steel FE-PA3601 (X6CrNiTi18-10). Air melted. Softened and cold rolled. Sheet and strip. a ≤ 3 mm. Rm ≥ 800 MPa

EN 9100:2009 Quality Management Systems - Requirements for Aviation, Space and Defense Organizations
ISO 6507-1:2005 Metallic materials Vickers hardness test Part 1: Test method
EN 10002-1 : 2001 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EN ISO 6508-1:2016 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016)
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
PREN 4436 : 200P1 AEROSPACE SERIES - STEEL - TEST METHODS - DETERMINATION OF DELTA FERRITE CONTENT
EN 10079:2007 Definition of steel products
EN 2950:2008 Aerospace series - Test method - Wrought heat resisting alloys Semi-finished products and parts - Conditions for macrographic and micrographic examination - Atlas of structures and defects
PREN 4050-1 : 200P1 AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION BARS, PLATES, FORGING STOCK AND FORGINGS - GENERAL INFORMATION
TR 2410 : 2 AEROSPACE SERIES - METALLIC MATERIALS - RELATIONSHIP BETWEEN DIMENSIONAL STANDARDS AND MATERIAL STANDARDS
EN 2032-2 : 1994 AEROSPACE SERIES - METALLIC MATERIALS - CODING OF METALLURGICAL CONDITION IN DELIVERY CONDITION
EN 10002-5:1991 Metallic materials - Tensile testing - Part 5: Method of testing at elevated temperature
PREN 2002-08 : 200P2 AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PART 8: MICROGRAPHIC DETERMINATION OF GRAIN SIZE
PREN 2003-7 : 200P1 AEROSPACE SERIES - STEEL - TEST METHODS - PART 7: MACROGRAPHIC TEST
PREN 2002-06 : 200P2 AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PART 6: BEND TESTING
SAE AMS 2750 : 2012 PYROMETRY
EN 10045-1 : 1990 METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD
ISO 3887:2003 Steels Determination of depth of decarburization
ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
EN 2032-1 : 2001 AEROSPACE SERIES - METALLIC MATERIALS - PART 1: CONVENTIONAL DESIGNATION
ISO 3651-1:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
ISO 9001:2015 Quality management systems — Requirements
PREN 4259 : 200P1 AEROSPACE SERIES - METALLIC MATERIALS - DEFINITION OF GENERAL TERMS
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
EN 2002-002 : 2005 AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PART 2: TENSILE TESTING AT ELEVATED TEMPERATURE
EN 4258:1998 Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use
PREN 4050-4 : 200P1 AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - ACCEPTANCE CRITERIA
PREN 2951 : 200P1 AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - MICROGRAPHIC DETERMINATION OF CONTENT OF NON-METALLIC INCLUSIONS
EN 2078:2001 Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval

View more information
US$216.20
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.