SAE AMS 2360 : 2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
ROOM TEMPERATURE TENSILE PROPERTIES OF CASTINGS
Available format(s)
Hardcopy , PDF
Superseded date
04-18-2019
Language(s)
English
Published date
01-01-2012
Publisher
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Establishes a procedure for designating minimum room temperature tensile property requirements of castings by means of this AMS number and a series of dash numbers.
| Committee |
AMS-F
|
| DocumentType |
Standard
|
| Pages |
3
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy |
| SAE AMS 5349 : 2013 | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 13CR, FREE MACHINING; HARDENED AND TEMPERED |
| SAE AMS 5346 : 2014 | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 15CR - 4.6NI - 0.22CB (NB) - 2.8CU, SOLUTION AND PRECIPITATION HEAT TREATED (H925), 180 KSI (1241 MPA) TENSILE STRENGTH (15-5) |
| SAE AMS 4511 : 2012 | COPPER-BERYLLIUM ALLOY CASTINGS 97CU - 2.1BE - 0.52(CO + NI) - 0.28SI SOLUTION AND PRECIPITATION HEAT TREATED (TFOO) |
| SAE AMS 4863 : 2015 | COPPER-NICKEL-TIN ALLOY CASTINGS, CU - 15NI - 8SN, HOT ISOSTATICALLY PRESSED, SOLUTION ANNEALED AND SPINODAL HEAT TREATED |
| SAE AMS 4240 : 1982 | CASTINGS, SAND - 10MG, SOLUTION HEAT TREATED & NATURALLY AGED |
| SAE AMS 5336 : 2017 | STEEL, INVESTMENT CASTINGS, 0.95CR - 0.20MO (0.25 - 0.35C) (4130 MOD) NORMALIZED OR NORMALIZED AND TEMPERED |
| SAE AMS 4222 : 2017 | ALUMINUM ALLOY CASTINGS, SAND, MODERATE HEAT RESISTANCE 4.0CU - 2.0NI - 1.5MG - 0.12TI (242.0P) SOLUTION HEAT TREATED AND STABILIZED |
| SAE AMS 5396 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, INVESTMENT CASTINGS, 65NI - 28MO - 5.5FE - 0.40V (N-12MV), AS-CAST |
| SAE AMS 5350 : 2017 | STEEL, CORROSION AND MODERATE HEAT-RESISTANT, INVESTMENT CASTINGS, 12.5CR (410), HARDENED AND TEMPERED |
| SAE AMS 4284 : 2017 | ALUMINUM ALLOY CASTINGS, PERMANENT MOLD, 7.0SI - 0.30MG (356.0-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4223 : 2015 | ALUMINUM ALLOY, CASTINGS, 4.5CU - 0.70AG - 0.30MN - 0.25MG - 0.25TI (A201.0-T4), SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE MAM 5401 : 2003 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, INVESTMENT CASTINGS 62NI - 21.5CR - 9.0MO - 3.6CB VACUUM MELTED, VACUUM CAST AS CAST |
| SAE AMS 4289 : 2013 | ALUMINUM ALLOY CASTINGS, 7.0SI - 0.55MG - 0.12TI (F357.0-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5390 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, INVESTMENT CASTINGS, 47.5NI - 22CR - 1.5CO - 9MO - 0.60W - 18.5FE (N-12MV) AS-CAST |
| SAE AMS 5401 : 2004 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, INVESTMENT CASTINGS, 62NI - 21.5CR - 9.0MO - 3.6CB (NB), VACUUM MELTED, VACUUM CAST, AS CAST |
| SAE AMS 4286 : 2015 | ALUMINUM ALLOY CASTINGS, PERMANENT MOLD, 7.0SI - 0.32MG (356.0-T51), AS-CAST THEN PRECIPITATION HEAT TREATED |
| SAE AMS 4890 : 2018 | COPPER-BERYLLIUM ALLOY CASTINGS, 97CU - 2.1BE - 0.52CO - 0.28SI, SOLUTION HEAT TREATED (TB00) |
| SAE AMS 5366 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, INVESTMENT CASTING 25CR - 20NI (CK-20) AS-CAST |
| SAE AMS 5344 : 2013 | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 16CR - 4.1NI - 0.28CB - 3.2CU, HOMOGENIZATION, SOLUTION, AND PRECIPITATION HEAT TREATED (H900), 180 KSI (1241 MPA) TENSILE STRENGTH (17-4) |
| SAE AMS 5340 : 2018 | STEEL, CORROSION RESISTANT, INVESTMENT CASTINGS, 14CR - 4.25NI - 2.25MO - 0.25CB - 3.25CU, HOMOGENIZATION AND SOLUTION HEAT TREATED |
| SAE AMS 4235 : 2015 | ALUMINUM ALLOY CASTINGS, 4.6CU - 0.35MN - 0.25MG - 0.22TI (A206.0-T7), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4484 : 2013 | MAGNESIUM ALLOY CASTINGS, PERMANENT MOLD, 9.0AL - 2.0ZN (AZ92A-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4210 : 2012 | ALUMINUM ALLOY, CASTINGS - 5.0SI - 1.2CU - 0.50MG (355.0-T51) PRECIPITATION HEAT TREATED |
| SAE AMS 4873 : 2016 | ALUMINUM BRONZE ALLOY, SAND CASTINGS - 85CU - 11AL - 3.6FE - SOLUTION HEAT TREATED AND TEMPERED |
| SAE AMS 5383 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, INVESTMENT CASTINGS, 52.5NI - 19CR - 3.0MO - 5.1CB(NB) - 0.90TI - 0.60AL - 18FE, VACUUM MELTED HOMOGENIZATION AND SOLUTION HEAT TREATED |
| SAE AMS 5377 : 2013 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, INVESTMENT CASTINGS 73NI - 12CR - 4.5MO - 2.0CB - 0.70TI - 0.05C - 6.0AL - 0.010 - 0.10ZR VACUUM CAST, AS-CAST |
| SAE AMS 4227 : 1988 | ALUMINUM ALLOY, CASTINGS SAND, 8.0CU 6.0MG 0.50MN 0.50NI, AS CAST |
| SAE AMS 5347 : 2014 | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 15CR - 4.6NI - 0.22CB (NB) - 2.8CU, SOLUTION AND PRECIPITATION HEAT TREATED (H1000), 150 KSI (1034 MPA) TENSILE STRENGTH (15-5) |
| SAE AMS 4483 : 2013 | MAGNESIUM ALLOY CASTINGS, PERMANENT MOLD, 10AL (AM100A-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5356 : 2016 | STEEL, CORROSION RESISTANT, INVESTMENT CASTINGS, 15CR - 4.6NI - 0.22CB - 2.8CU, SOLUTION AND PRECIPITATION HEAT TREATED (H1100), 130 KSI (896 MPA) TENSILE STRENGTH |
| SAE AMS 5397 : 2015 | ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT-RESISTANT 50NI - 9.5CR - 15CO - 3.0MO - 4.8TI - 5.5AL - 0.015B - 0.95V - 0.06ZR VACUUM MELTED, VACUUM CAST, AS CAST |
| SAE AMS 5342 : 2014 | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 16CR - 4.1NI - 0.28CB (NB) - 3.2CU, HOMOGENIZATION, SOLUTION, AND PRECIPITATION HEAT TREATED (H1100), 130 KSI (896 MPA) TENSILE STRENGTH (17-4) |
| SAE AMS 4429 : 2012 | MAGNESIUM ALLOY CASTINGS, SAND 2.8ND - 1.4GD - 0.4ZN - 0.6ZR (EV31A - T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4285 : 2017 | ALUMINUM ALLOY CASTINGS, CENTRIFUGAL, 7.0SI - 0.30MG (356.0-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5358 : 2017 | STEEL CASTINGS, INVESTMENT, CORROSION RESISTANT, 18CR - 9NI, SOLUTION HEAT TREATED |
| SAE AMS 4249B : 2012 (R2018) | ALUMINUM ALLOY CASTINGS 7.0SI - 0.58MG - 0.15TI - 0.06BE (D357.0-T6) SOLUTION AND PRECIPITATION HEAT TREATED (REQUIRING FATIGUE AND FRACTURE TOUGHNESS TESTING) |
| SAE AMS 4424 : 2014 | Magnesium Alloy Castings, Sand 6.0Al - 3.0Zn (AZ63-T6) Solution and Precipitation Heat Treated |
| SAE AMS 4418 : 2012 | MAGNESIUM ALLOY, SAND CASTINGS, 2.5AG - 2.1DI - 0.70ZR (QE22A-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4440 : 1999 | MAGNESIUM ALLOY CASTINGS, SAND 3.5CE - 0.70ZR (EK41A-T5) PRECIPITATION HEAT TREATED |
| SAE AMS 4406 : 2018 | Aluminum Alloy, Centrifugal Castings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (709.0-T61) Hot Isostatically Pressed, Solution and Precipitation Heat Treated |
| SAE AMS 4439 : 2012 | MAGNESIUM ALLOY CASTINGS, 4.2ZN - 1.2 RARE EARTHS - 0.7ZR (ZE41A-T5), PRECIPITATION HEAT TREATED |
| SAE AMS 4871 : 2010(S2015) | ALUMINUM BRONZE, CENTRIFUGAL AND CHILL CASTINGS, 85CU - 11AL - 3.6FE, SOLUTION HEAT TREATED AND TEMPERED |
| SAE AMS 5343 : 2014 | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 16CR - 4.1NI - 0.28CB (NB) - 3.2CU, HOMOGENIZATION, SOLUTION, AND PRECIPITATION HEAT TREATED (H1000), 150 KSI (1034 MPA) TENSILE STRENGTH (17-4) |
| SAE AMS 5338 : 2017 | STEEL, INVESTMENT CASTINGS, 0.95CR - 0.20MO (0.35 - 0.45C) (4140 MOD), NORMALIZED OR NORMALIZED AND TEMPERED |
| SAE AMS 4482 : 2012 | CAST ALUMINUM ALLOY COMPOSITE 4.6 CU - 3.4TI - 1.4B - 0.75AG - 0.27MG (A205.0/TIB2/3P-T7P) SAND CAST, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5388 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, INVESTMENT CASTINGS 53.3NI - 16.5CR - 17MO - 4.5W - 5.8FE - 0.40V (CW-12MW), AS-CAST |
| SAE AMS 4212 : 2016 | Aluminum Alloy Castings 5.0Si - 1.2Cu - 0.50Mg (355.0-T6) Solution and Precipitation Heat Treated |
| SAE AMS 4225 : 2018 | ALUMINUM ALLOY, HEAT-RESISTANT, CASTINGS, 5.0CU - 1.5NI - 0.25MN - 0.25SB - 0.25CO - 0.20TI - 0.20ZR (203.0-T6), SOLUTION HEAT TREATED AND PRECIPITATION HEAT TREATED |
| SAE AMS 5400 : 2014 | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 15CR - 4.6NI - 0.22CB - 2.8CU, SOLUTION AND PRECIPITATION HEAT TREATED (H935), 170 KSI (1172 MPA) TENSILE STRENGTH |
| SAE AMS 4417 : 2018 | CASTINGS, SAND, MAGNESIUM ALLOY, 1.5AG - 2.1DI - 0.08CU - 0.70ZR (EQ21A - T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4443 : 2017 | MAGNESIUM ALLOY, SAND CASTINGS, 4.5ZN - 0.75ZR (ZK51A-T5) PRECIPITATION HEAT TREATED |
| SAE AMS 5385 : 2013 | COBALT ALLOY, CORROSION AND HEAT RESISTANT, INVESTMENT CASTINGS, 62MO - 27CR - 2.8NI - 5.5MO, AS-CAST |
| SAE AMS 5409 : 1984 | ALLOY CASTING, INVESTMENT, CORROSION AND HEAT RESISTANT 61NI - 16CR - 8.5CO - 1.8MO - 2.6W - 0.8CB - 3.4TI - 1.8TA - 3.4A1- 0.010B - 0.06ZR (0.03 - 0.08C), VACUUM MELTED, VACUUM CAST, AS CAST |
| SAE AMS 7918 : 2016 | BERYLLIUM ALUMINUM ALLOY INVESTMENT CASTINGS, 64.9BE - 30AL - 3AG - 1CO - 0.75GE, AS CAST |
| SAE AMS 5410 : 2017 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, INVESTMENT CASTINGS, 61NI - 16CR - 8.5CO - 1.8MO - 2.6W - 0.85CB (NB) - 3.4TI - 1.8TA - 3.4AL - 0.010B - 0.05ZR, VACUUM MELTED, VACUUM CAST AS CAST, OR SOLUTION TREATED, OR SOLUTION AND PRECIPITATION HARDENED |
| SAE AMS 4231 : 1983 | CASTINGS, SAND - 4.5CU - 1.1SI, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4219 : 2015 | ALUMINUM ALLOY CASTINGS, 7.0SI - 0.55MG - 0.12TI - 0.06BE (A357.0 T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5389 : 1987(R2017) | ALLOY CASTINGS, SAND, CORROSION AND HEAT RESISTANT, 55NI - 16.5CR - 17MO - 4.5W - 5.8FE - 0.40V, SOLUTION HEAT TREATED |
| SAE AMS 4214 : 2013 | CASTINGS, ALUMINUM ALLOY SAND, 5.0SI - 1.2CU - 0.50MG (355.0-T71), SOLUTION HEAT TREATED AND OVERAGED |
| SAE AMS 5361G : 2013(S 2019) | STEEL CASTINGS, SAND AND CENTRIFUGAL, CORROSION AND HEAT RESISTANT, 18.5CR - 13.5NI - 2.1MO, SOLUTION HEAT TREATED |
| SAE AMS 4261 : 2017 | ALUMINUM ALLOY CASTINGS, INVESTMENT, 7.0SI - 0.32MG (356.0-T51), PRECIPITATION HEAT TREATED |
| SAE AMS 5368 : 2012 | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS 15CR - 4.0NI - 2.3MO - 0.09N SOLUTION HEAT TREATED |
| SAE AMS 4870 : 2012 | ALUMINUM BRONZE, CENTRIFUGAL AND CHILL CASTINGS 85CU - 11AL - 3.6FE AS CAST (COMPOSITION SIMILAR TO UNS C95420) |
| SAE AMS 5391 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, INVESTMENT CASTINGS, 73NI - 0.14C - 13CR - 4.5MO - 2.3CB (NB) - 0.75TI - 6.0AL - 0.010B - 0.10ZR VACUUM CAST, AS-CAST |
| SAE AMS 5334 : 2013 | STEEL, INVESTMENT CASTINGS, 0.50CR - 0.55NI - 0.20MO (0.25 - 0.35C) (SAE 8630 MOD), NORMALIZED AND TEMPERED |
| SAE AMS 4420 : 2017 | MAGNESIUM ALLOY CASTINGS, SAND, 6AL - 3ZN (AZ63A-F), AS CAST |
| SAE AMS 4236 : 2015 | ALUMINUM ALLOY CASTINGS, 4.6CU - 0.35MN - 0.25MG - 0.22TI (A206.0-T4), SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 4229 : 2015 | ALUMINUM ALLOY CASTINGS, HIGH STRENGTH, 4.5CU - 0.70AG - 0.30MN - 0.25MG - 0.25TI (A201.0-T7), SOLUTION HEAT TREATED AND OVERAGED |
| SAE AMS 4452 : 2012 | MAGNESIUM ALLOY, INVESTMENT CASTINGS, 8.7AL - 0.70ZN - 0.22MN (AZ91C-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4881 : D2012(R2018) | NICKEL-ALUMINUM-BRONZE, MARTENSITIC, SAND, CENTRIFUGAL AND CONTINUOUS CASTINGS, 78CU - 11AL - 5.1NI - 4.8FE, QUENCH HARDENED AND TEMPER ANNEALED |
| SAE AMS 4442 : 2012 | MAGNESIUM ALLOY SAND CASTINGS, 3.2 RARE EARTHS - 2.5ZN - 0.70ZR (EZ33A-T5), PRECIPITATION HEAT TREATED |
| SAE AMS 4453 : 2012 | MAGNESIUM ALLOY, INVESTMENT CASTINGS, 9.0AL - 2.0ZN (AZ92A-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5357 : 2017 | STEEL, CORROSION RESISTANT, INVESTMENT CASTINGS, 15CR - 4.6NI - 0.22CB - 2.8CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5376 : 2013 | ALLOY, CORROSION AND HEAT RESISTANT, INVESTMENT CASTINGS, 30FE - 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0CB - 0.15N, AS CAST |
| SAE AMS 5330 : 2015 | STEEL CASTINGS, INVESTMENT, 0.80CR - 1.8NI - 0.35MO (0.38 - 0.46C) (SAE 4340 MODIFIED), ANNEALED |
| SAE AMS 4241 : 2015 | ALUMINUM ALLOY CASTINGS, 7.0SI - 0.58MG - 0.15TI - 0.06BE (D357.0-T6), SOLUTION AND PRECIPITATION HEAT TREATED, DENDRITE ARM SPACING (DAS) CONTROLLED |
| SAE AMS 4434 : 2017 | MAGNESIUM ALLOY CASTINGS, SAND, 9.0AL - 2.0ZN (AZ92A-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5339 : 2017 | STEEL, MARAGING, INVESTMENT CASTINGS, 17NI - 10CO - 4.6MO - 0.30TI - 0.06AL, VACUUM MELTED, HOMOGENIZED, OVERAGED AND SOLUTION HEAT TREATED |
| SAE AMS 4281 : 2014 | ALUMINUM ALLOY CASTINGS, PERMANENT MOLD, 5.0SI - 1.2CU - 0.50MG (355.0-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS5341:2012(S2017) | STEEL CASTINGS, INVESTMENT, CORROSION RESISTANT, 19.5CR - 10.5NI - 0.25S (TYPE 303), SOLUTION HEAT TREATED |
| SAE AMS 4455 : 2012 | MAGNESIUM ALLOY, INVESTMENT CASTINGS, 10AL (AM100A-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4280 : 2014 | ALUMINUM ALLOY CASTINGS, PERMANENT MOLD, 5.0SI - 1.2CU - 0.5MG (355.0-T71), SOLUTION HEAT TREATED AND OVERAGED |
| SAE AMS 5363 : 2017 | STEEL CASTINGS, SAND AND CENTRIFUGAL, CORROSION AND HEAT RESISTANT, 18.5CR - 10.5NI - 0.90 (CB+TA), SOLUTION HEAT TREATED |
| SAE MAM 4427 : 2003 | MAGNESIUM ALLOY SAND CASTINGS 4.0Y - 2.3ND - 0.7ZR (WE43A - T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5375 : 1982 | ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 65.5CO - 25CR - 1.8NI - 5.0W AS CAST |
| SAE AMS 5360 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, INVESTMENT CASTINGS, 17CR - 13NI - 1.9MO, SOLUTION HEAT TREATED |
| SAE AMS 4426 : 2013 | CASTINGS, SAND, MAGNESIUM ALLOY 5.1Y - 3.0RE - 0.70ZR (WE54-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4427 : 2012 | MAGNESIUM ALLOY CASTINGS, SAND, 4.0Y - 2.3ND - 0.7ZR (WE43B - T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5380 : 2013 | COBALT ALLOY, CORROSION AND HEAT RESISTANT, INVESTMENT CASTINGS, 50.5CO - 26CR - 15NI - 6.0MO, AS-CAST |
| SAE AMS5337E : 2017 | STEEL, MARAGING, INVESTMENT CASTINGS, 18.5NI - 9.0CO - 5.0MO - 0.70TI - 0.12AL, VACUUM MELTED, HOMOGENIZED, OVERAGED, AND SOLUTION HEAT TREATED |
| SAE AMS 5354 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, INVESTMENT CASTINGS, 13CR - 2.0NI - 3.0W, HARDENED AND TEMPERED TO 32 - 38 HRC |
| SAE AMS 5364 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, INVESTMENT CASTINGS, 19.5CR - 10.5NI - 0.65CB (CF-8C), SOLUTION HEAT TREATED |
| SAE AMS 4444 : 2017 | MAGNESIUM ALLOY CASTINGS, SAND, 6.0ZN - 0.80ZR (ZK61A-T5), PRECIPITATION HEAT TREATED |
| SAE AMS 4471 : 2014 | CAST ALUMINUM ALLOY COMPOSITE 4.6CU - 3.4TI - 1.4B - 0.75AG - 0.27MG (205.0/TIB[2]/3P-T7P) INVESTMENT CAST, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5402 : 2004 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, INVESTMENT CASTINGS 62NI - 21.5CR - 9.0MO - 3.6CB (NB) AS CAST |
| SAE AMS 4880 : 2011 | ALUMINUM BRONZE ALLOY, CENTRIFUGAL AND CONTINUOUS-CAST CASTINGS - 81.5CU - 10.3AL - 5.0NI - 2.8FE QUENCH HARDENED AND TEMPER ANNEALED (TQ50) |
| SAE AMS 4217 : 2018 | ALUMINUM ALLOY, CASTINGS, 7.0SI - 0.32MG (356.0-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4425 : 2017 | MAGNESIUM ALLOY CASTINGS, SAND, 5.8ZN - 2.5RE - 0.70ZR (ZE63-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4288 : 2016 | ALUMINUM ALLOY CASTINGS, 7.0SI - 0.58MG - 0.15TI (E357.0-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS5328E:1987(S2017) | STEEL CASTINGS, INVESTMENT, 0.80CR - 1.8NI - 0.35MO (0.28 - 0.36C) (SAE 4330 MODIFIED), ANNEALED |
| SAE AMS 5353E : 2007(R2015) | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 16CR - 1.8NI - 0.08N, AS CAST |
| SAE AMS 4242 : 2015 | ALUMINUM ALLOY, CASTINGS, 4.7CU - 0.60AG - 0.35MN - 0.25MG - 0.25TI (B201.0-T7), SOLUTION HEAT TREATED AND OVERAGED |
| SAE AMS 4437 : 2014 | MAGNESIUM ALLOY CASTINGS, SAND, 8.7AL - 0.70ZN (AZ91C-T6), SOLUTION HEAT TREATED AND AGED |
| ASTM E 8 : 2004 | Standard Test Methods for Tension Testing of Metallic Materials |
US$57.82
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.