|
PPP-C-96 Revision E:1992
|
CAN, METAL, 28 GAGE AND LIGHTER
|
|
FED-STD-601 Base Document:1955
|
RUBBER, SAMPLING AND TESTING
|
|
SAE AMS 4049 : 2016
|
ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 5.6ZN - 2.5MG - 1.6CU - 0.23CR (ALCLAD 7075; -T6 SHEET - T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED
|
|
PPP-B-636 Revision J:1981
|
BOX, SHIPPING, FIBERBOARD
|
|
MS24694 Revision C:1969
|
SCREW, MACHINE, FLAT COUNTERSUNK HEAD, 100 DEG, STRUCTURAL, CROSS RECESSED, UNC-3A AND UNF-3A
|
|
SAE AMS 3276 : 2016
|
SEALING COMPOUND, INTEGRAL FUEL TANKS AND GENERAL PURPOSE, INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C)
|
|
SAE AMS 4911 : 2014
|
TITANIUM ALLOY, SHEET, STRIP, AND PLATE, 6AL - 4 V, ANNEALED
|
|
MIL-A-9962 Revision A:1966
|
ABRASIVE MATS, NON-WOVEN, NON-METALLIC
|
|
SAE AMS3819C : 2007
|
CLOTHS, CLEANING, FOR AIRCRAFT PRIMARY AND SECONDARY STRUCTURAL SURFACES
|
|
SAE AS 7202 : 1991
|
NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) REQUIREMENTS FOR ACCREDITATION OF VALUE ADDED DISTRIBUTORS
|
|
MIL-C-27725 Revision B:1969
|
COATING, CORROSION PREVENTIVE, FOR AIRCRAFT INTEGRAL FUEL TANKS
|
|
MIL C 85285 : C
|
|
|
SAE AMS 4037 : 2014
|
ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN (2024; -T3 FLAT SHEET, -T351 PLATE) SOLUTION HEAT TREATED
|
|
MIL L 81352 : A
|
LACQUER, ACRYLIC (FOR NAVAL WEAPONS SYSTEMS)
|
|
SAE AMS 4045 : 2016
|
ALUMINUM ALLOY SHEET AND PLATE 5.6ZN - 2.5MG - 1.6CU - 0.23CR 7075: (-T6 SHEET, -T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED
|
|
MIL S 5002 : D
|
SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS
|
|
MIL-S-7839 Revision B:1973
|
SCREW, STRUCTURAL, AIRCRAFT
|
|
ASTM D 792 : 2013 : REDLINE
|
Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
|
|
SAE AMS 5516 : 2012
|
STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 18CR - 9.0NI (SAE 30302), SOLUTION HEAT TREATED
|
|
MIL P 23377 : G
|
PRIMER COATING, EPOXY, HIGH SOLIDS
|
|
MIL-T-9046 Revision J:1983
|
TITANIUM AND TITANIUM ALLOY, SHEET, STRIP AND PLATE
|
|
SAE AS 7003 : 2008
|
NADCAP PROGRAM REQUIREMENTS
|
|
TT-N-97 Revision D:2007
|
Naphtha; Aromatic
|
|
SAE MAM 4911 : 1994
|
TITANIUM ALLOY, SHEET, STRIP, AND PLATE, 6AL - 4V, ANNEALED
|
|
SAE AMS 3100 : 2013
|
ADHESION PROMOTER FOR POLYSULFIDE SEALING COMPOUNDS
|
|
SAE AS 7001 : 1990
|
NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) PROGRAM DESCRIPTION
|
|
SAE AS 7002 : 1990
|
NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) RULES FOR IMPLEMENTATION
|
|
SAE AMS 3020 : 2013
|
OIL, REFERENCE, FOR 'L' STOCK RUBBER TESTING
|
|
CCC-C-419 Revision G:1989
|
CLOTH, DUCK, UNBLEACHED, PLIED-YARNS, ARMY AND NUMBERED
|
|
MIL-C-38736 Revision B Base Document:1984
|
CLEANING COMPOUND, SOLVENT MIXTURES (METRIC)
|
|
MIL C 5541 : E
|
CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS
|
|
MIL-C-38334 Revision A:1971
|
CORROSION REMOVING COMPOUND, PREPAINT, FOR AIRCRAFT ALUMINUM SURFACES
|
|
PPP-D-729 Revision E:1977
|
DRUMS, SHIPPING AND STORAGE, STEEL, 55 GALLON (208 LITERS)
|
|
SAE AMS 2629 : 2017
|
FLUID, JET REFERENCE
|
|
SAE AMS 2400 : 2013
|
PLATING, CADMIUM
|
|
SAE AMS 2825 : 1987
|
MATERIAL SAFETY DATA SHEETS
|
|
PPP-P-704 Revision E:1981
|
Pails, Metal: (Shipping, Steel, 1 through 12 Gallons)
|
|
NAS679:2010
|
NUT, SELF-LOCKING, HEXAGON, LOW HEIGHT
|
|
FED-STD-141 Revision D:2001
|
PAINT, VARNISH, LACQUER AND RELATED MATERIALS, METHODS OF INSPECTION, SAMPLING AND TESTING
|
|
SAE AMS 2471 : 2014
|
ANODIC TREATMENT OF ALUMINUM ALLOYS SULFURIC ACID PROCESS, UNDYED COATING
|
|
SAE AS 7200/1 : 1994
|
NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) - AUDIT AND INSPECTION PROCEDURES AND CHECKLISTS FOR THE SEALANT MANUFACTURERS ACCREDITATION PROGRAM
|
|
SAE AMS 4901 : 2015
|
TITANIUM SHEET, STRIP, AND PLATE, COMMERCIALLY PURE, ANNEALED, 70.0 KSI (485 MPA)
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.