SAE AMS 5737 : 2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED
Available format(s)
Hardcopy , PDF
Superseded date
12-16-2022
Language(s)
English
Published date
01-01-2012
Publisher
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Specifies a corrosion and heat resistant steel in the form of bars, wire, forgings, mechanical tubing, and stock for forging or heading.
| Committee |
AMS-F
|
| DocumentType |
Standard
|
| Pages |
7
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE AS 5377 : 2000 | NUT, SELF-LOCKING, 0.7500 THRU 1.5000 THREAD SIZES, UNS S66286, 160,000 PSI, 800 DEGREE F, UNJ THREAD - PROCUREMENT SPECIFICATION |
| FF-R-556 Revision D:1981 | RIVET, SOLID, SMALL, RIVET, SPLIT, SMALL, RIVET TUBULAR SMALL, FLAT WASHER (BURR) AND CAP RIVET, GENERAL PURPOSE |
| MIL-DTL-8783 Revision D:2009 | Clamp, Hose, Flat Band 500 Degrees F, General Specification for |
| 17/30369678 DC : 0 | PREN 7010 - AEROSPACE SERIES - USER GUIDE FOR CREATION AND DESIGNATION OF BOLTS |
| SAE MA 4368 : 2018 | NUT, PLAIN ROUND - SPANNER WRENCHING, SHAFT MOUNTED, UNS S66286, PROCUREMENT SPECIFICATION FOR, METRIC |
| SAE MA 1568 : 2018 | NUT, SELF LOCKING - UNS S66286, 425 DEGREE C AND 650 DEGREE C, 1100 MPA, MJ THREAD, PROCUREMENT SPECIFICATION FOR, METRIC |
| SAE AS 5960 : 2013 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC BRAID REINFORCED, 5080 PSI (35000 KPA), 400 DEGREES F (204 DEGREES C), AIRCRAFT HYDRAULIC SYSTEMS |
| MIL-P-87988 Base Document:1989 | PIN-RIVET, THREADED WITH HEX SOCKET |
| PREN 4832 : DRAFT 2017 | AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION |
| SAE AS 4723 : 2012 | INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, KEY LOCKED, PLASTIC SELF LOCKING DEVICE, SOLID FILM LUBRICANT, PROCUREMENT SPECIFICATION FOR |
| SAE AS 4108 : 2018 | T-BOLT AND EYE BOLT, A286 CRES, 1000 DEGREES F FATIGUE RATED |
| BS EN 6105:2016 | Aerospace series. Stud with shoulder |
| MIL-DTL-7885-16 Base Document:1996 | RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING HEAD, NICKEL-COPPER ALLOY SLEEVE (ALUM COAT), MECHANICALLY LOCKED CRES SPINDLE, OVERSIZE DIAMETER (TYPE I, STYLE B, CLASS 4) |
| MIL-DTL-7885-12 Base Document:1996 | RIVETS, BLIND, STRUCTURAL, 100 DEG. FLUSH HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED CRES SPINDLE |
| MIL-DTL-7885-14 Base Document:1996 | RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED CRES SPINDLE, OVERSIZE DIAMETER (TYPE I, STYLE B, CLASS 1) |
| MIL-DTL-7885-11 Base Document:1996 | RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED CRES SPINDLE (TYPE I, STYLE A, CLASS 1) |
| MIL-DTL-7885-15 Base Document:1996 | RIVETS, BLIND, STRUCTURAL, 100 DEG.FLUSH HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED CRES SPINDLE, OVERSIZE DIAMETER (TYPE I, STYLE B, CLASS 2) |
| MIL-B-23964 Revision D:1981 | BOLT, SELF-RETAINING, POSITIVE LOCKING |
| MIL-F-81177 Revision E:1984 | FASTENERS, BLIND, HIGH STRENGTH, INSTALLATION FORMED ALLOY STEEL, GENERAL SPECIFICATION FOR |
| MIL-DTL-7885-20 Base Document:1996 | RIVETS, BLIND, STRUCTURAL, 100 DEG. FLUSH SHEAR HEAD, NICKEL-COPPER ALLOY SLEEVE (ALUM COAT), MECHANICALLY LOCKED CRES SPINDLE, (TYPE 1, STYLE A, CLASS 3) |
| MIL-B-7874 Revision B:1982 | BOLT, MACHINE 1200 DEGREES F |
| SAE AS3626B:2018(R2023) | NUT, SELF-LOCKING, DOUBLE HEXAGON, REDUCED ENVELOPE, UNS S66286, COUNTERBORED SILVER PLATED THREADS ONLY |
| MIL-DTL-7885-13 Base Document:1996 | RIVETS, BLIND, STRUCTURAL, 100 DEG. FLUSH SHEAR HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED CRES SPINDLE |
| MIL-S-45915 Revision A:1967 | STUD, LOCKED IN - KEY LOCKED - GENERAL SPECIFICATION FOR |
| 14/30310866 DC : 0 | BS EN 4836 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER- FLARED END - WITH EXTRA FINE THREAD PITCH - INCH SERIES |
| NAS1068:1991 | NUT, SELF-LOCKING, PLATE, TWO LUG, LOW-HEIGHT, C'BORED, FLOATING, REDUCED RIVET SPACING |
| SAE AS 4891 : 1999 | STUD, LOCKED IN, KEY LOCKED, UNS S66286, CLASSIFICATION: 140 KSI PROCUREMENT SPECIFICATION FOR |
| I.S. EN 6129:2016 | AEROSPACE SERIES - BLIND BOLT, PROTRUDING HEAD, HIGH STRENGTH, PULLTYPE |
| MIL-HDBK-510 Revision A:2014 | AEROSPACE FUELS CERTIFICATION |
| PREN 6110 : 200P1 | AEROSPACE SERIES - BOLTS, BLIND - 100 DEGREE FLUSH HEAD - STAINLESS STEEL |
| I.S. EN 6105:2016 | AEROSPACE SERIES - STUD WITH SHOULDER |
| SAE AS 45909 : 2015 | STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR |
| MIL-DTL-45932 Revision A:2015 | INSERT, SCREW THREAD, THIN WALL, LOCKED IN: GENERAL SPECIFICATION FOR |
| SBAC TS 172 : 4 | PERFORMANCE SPECIFICATION FOR NUT, UNION, METRIC THREADED, SELF-LOCKING, A286 DRY FILM LUBRICATED |
| SBAC TS 128 : 6 | 'ALL-METAL' SELF-LOCKING NUTS (UNJ THREADS) 1100 MPA (160,000 LBF/IN[2]) MINIMUM TENSILE STRENGTH AT ROOM TEMPERATURE |
| MIL-HDBK-510-1 Revision A:2010 | AEROSPACE FUELS CERTIFICATION |
| 14/30310863 DC : 0 | BS EN 4833 - AEROSPACE SERIES - PIPE COUPLING 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING - FLARED END - INCH SERIES - WITH EXTRA FINE THREAD PITCH |
| SAE AS 4976 : 2012 | Insert, Screw Thread, Non-Locking, UNS S66286, Locked in, Key Locked, Procurement Specification for(STABILIZED Mar 2019) |
| 14/30310862 DC : 0 | BS EN 4832 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION |
| MIL-DTL-27536 Revision C:1995 | COUPLING, CLAMP, GROOVED, V-BAND |
| MIL-I-45914 Revision A:1991 | INSERT, SCREW THREAD - LOCKED IN, KEY LOCKED |
| SAE AS 7250D : 2013(R2018) | NUTS, SELF-LOCKING, STEEL, CORROSION AND HEAT RESISTANT HIGH STRENGTH, ALL METAL 1200 DEGREES F USE, UN THREAD FORM |
| SAE AS 5000 : 2010 | FITTING, PLUG-IN UNION, RING LOCKED, 24 DEGREE CONE, FLUID CONNECTION, 5080 PSI (35000 KPA), SPECIFICATION FOR |
| SAE AS 5887 : 2014 | INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, LOCKED IN, KEY LOCKED PROCUREMENT SPECIFICATION FOR |
| SAE AS 4726 : 2017 | NUTS, SELF-LOCKING, UNS S66286 CLASSIFICATION: 220 KSI/850 DEGREE F PROCUREMENT SPECIFICATION |
| EN 6128 : 2017 | Aerospace series - Blind bolt, 100° flush head, high strength |
| NASA MSFC STD 557 : 2012 | THREADED FASTENERS, TITANIUM ALLOYS, USAGE CRITERIA FOR LAUNCH VEHICLES AND SPACECRAFT APPLICATIONS |
| MIL-DTL-45910 Revision D:2015 | INSERT, SCREW THREAD-LOCKED IN AND RING LOCKED, SERRATED GENERAL SPECIFICATION FOR |
| MIL-B-85667-9 Base Document:1991 | BOLT, SLEEVE, PROTRUDING HEAD, STRAIGHT SHANK, CRES 304 SLEEVE, CRES A-286 PIN, 95 KSI FSU, 160 KSI FTU, 450 DEGREES F |
| SAE AS 1371 : 2015 | NUTS, SELF-LOCKING, CORROSION RESISTANT STEEL, HIGH STRENGTH, PREVAILING TORQUE, ALL METAL, 800 DEGREES F (427 DEGREES C) USE, UNJ THREAD FORM |
| BS EN 6129:2016 | Aerospace series. Blind bolt, protruding head, high strength, pulltype |
| EN 6129:2016/AC:2017 | AEROSPACE SERIES - BLIND BOLT, PROTRUDING HEAD, HIGH STRENGTH, PULLTYPE |
| EN 6105:2016 | Aerospace series - Stud with shoulder |
| SAE AS 4751 : 2005 | COUPLING ASSEMBLY, V-BAND SHEET METAL WIDE FLANGE, PNEUMATIC TUBE |
| SAE AS 4892 : 2012 | INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, LOCKED IN, KEY LOCKED, PROCUREMENT SPECIFICATION FOR |
| PREN 6122 : 200P1 | AEROSPACE SERIES - BLIND BOLT, 130 DEGREES FLUSH HEAD, HIGH STRENGTH, PREFERABLE IN COMPOSITE APPLICATION |
| PREN 4833 : DRAFT 2017 | AEROSPACE SERIES - PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING LOCKED FITTING - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH |
| SAE AS 269J:2012:(S2018) | IDENTIFICATION OF MATERIAL FOR AN, MS AND AS ENGINE AND PROPELLER STANDARD UTILITY PARTS AND ALSO FOR COMPANY PARTS |
| PREN 4836 : DRAFT 2017 | AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH |
| SAE AS 7251 : 2014 | NUTS, SELF-LOCKING, STEEL, CORROSION AND HEAT RESISTANT HIGH STRENGTH, ALL METAL 1200 DEGREES F USE, UNJ THREAD FORM |
| SAE MA 3375 : 2011 | STUDS, CORROSION AND HEAT RESISTANT STEEL, UNS S66286 TENSILE STRENGTH 900 MPA, PROCUREMENT SPECIFICATION, METRIC, FSC 5307 |
| I.S. EN 6128:2017 | AEROSPACE SERIES - BLIND BOLT, 100 DEGREE FLUSH HEAD, HIGH STRENGTH |
| SAE AS 4393 : 2015 | NUT, SELF-LOCKING, UNS S66286, 1200 DEGREES F, 160,000 PSI, UNJ THREAD |
| BS EN 6128:2017 | Aerospace series. Blind bolt, 100° flush head, high strength |
| PREN 6127 : 200P2 | AEROSPACE SERIES - BLIND BOLT, 100 DEGREES REDUCED FLUSH HEAD, HIGH STRENGTH |
| PREN 6105 : 200P1 | AEROSPACE SERIES - STUD WITH SHOULDER |
| PREN 6128 : 200P2 | AEROSPACE SERIES - BLIND BOLT, 100 DEGREES FLUSH HEAD, HIGH STRENGTH |
| PREN 6129 : 200P1 | AEROSPACE SERIES - BLIND BOLT, PROTRUDING HEAD, HIGH STRENGTH |
| SAE AMS 2241 : 2016 | TOLERANCES, CORROSION AND HEAT-RESISTANT STEEL, IRON ALLOY, TITANIUM, AND TITANIUM ALLOY BARS AND WIRE |
| SAE AMS 2248 : 2016 | CHEMICAL CHECK ANALYSIS LIMITS, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, MARAGING AND OTHER HIGHLY-ALLOYED STEELS, AND IRON ALLOYS |
| SAE AMS 2806D : 2013 | IDENTIFICATION BARS, WIRE, MECHANICAL TUBING, AND EXTRUSIONS, CARBON AND ALLOY STEELS AND CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS |
| SAE AMS 2750 : 2012 | PYROMETRY |
| SAE AMS 2371 : 2016 | QUALITY ASSURANCE SAMPLING AND TESTING, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, WROUGHT PRODUCTS AND FORGING STOCK |
| ASTM E 353 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
| SAE AMS 2374 : 2016 | QUALITY ASSURANCE SAMPLING AND TESTING CORROSION AND HEAT-RESISTANT STEEL AND ALLOY FORGINGS |
| SAE AMS 2808 : 2017 | IDENTIFICATION FORGINGS |
| SAE AMS 2243 : 2013 | TOLERANCES, CORROSION AND HEAT-RESISTANT STEEL TUBING |
US$108.56
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.