SAE AMS 7287 : 2012

Name: SAE AMS 7287 : 2012
Brand: SAE

Superseded

View Superseded by

FLUOROCARBON ELASTOMER (FKM) HIGH TEMPERATURE/HTS OIL RESISTANT/FUEL RESISTANT LOW COMPRESSION SET/70 TO 80 HARDNESS, LOW TEMPERATURE TG -22 DEGREES F (-30 DEGREES C) FOR SEALS IN OIL/FUEL/SPECIFIC HYDRAULIC SYSTEMS

Superseded date

09-10-2022

Published date

08-29-2012

Publisher

SAE International

1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES

Describes a high temperature, compression set and fluid resistant fluorocarbon (FKM) elastomer in the form, of O-rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications.

Committee	AMS CE
DevelopmentNote	Supersedes SAE AMS R 83485. (06/2014)
DocumentType	Standard
PublisherName	SAE International
Status	Superseded
SupersededBy	SAE AMS7287A:2022
Supersedes	SAE AMS R 83485 : 2014

SAE AIR 1387 : 2016	DESIGNING WITH ELASTOMERS FOR USE AT LOW TEMPERATURES, NEAR OR BELOW GLASS TRANSITION
SAE AS 83485 : 2016	O-RING MOLDED FROM AMS7287 MATERIAL
MIL-STD-1587 Revision D:2017	MATERIAL AND PROCESS REQUIREMENTS FOR AEROSPACE WEAPONS SYSTEMS
SAE AS 19692 : 2016	Aerospace – Military Type Variable Delivery, Pressure Compensated Hydraulic Pump
SAE AS 4941 : 2015	AEROSPACE - GENERAL REQUIREMENTS FOR COMMERCIAL AIRCRAFT HYDRAULIC COMPONENTS
MIL-STD-1568 Revision D:2015	Materials and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems
SAE AIR 786 : 2014	ELASTOMER COMPATIBILITY CONSIDERATIONS RELATIVE TO ELASTOMERIC SEALANT SELECTION

ASTM D 297 : 2015 : REDLINE	Standard Test Methods for Rubber Products—Chemical Analysis
SAE AMS 2817 : 2016	PACKAGING AND IDENTIFICATION OF MOLDED ELASTOMERIC SEALS AND SEALING COMPONENTS
MIL-PRF-7808 Revision L:1997	LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE
ASTM D 1414 : 2015 : REDLINE	Standard Test Methods for Rubber O-Rings
SAE AS 568 : 2014	AEROSPACE SIZE STANDARD FOR O-RINGS
SAE AIR 851 : 2014	O-RING TENSION TESTING CALCULATIONS
SAE ARP 5316 : 2014	STORAGE OF ELASTOMER SEALS AND SEAL ASSEMBLIES WHICH INCLUDE AN ELASTOMER ELEMENT PRIOR TO HARDWARE ASSEMBLY
MIL-PRF-23699 Revision G:2014	Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167
SAE AS 5752 : 2014	AEROSPACE - VISUAL INSPECTION STANDARD FOR ELASTOMERIC SEALING ELEMENTS OTHER THAN O-RINGS
SAE AS 5780 : 2013	SPECIFICATION FOR AERO AND AERO-DERIVED GAS TURBINE ENGINE LUBRICANTS
SAE AMS 3085 : 2016	FLUID, REFERENCE FOR TESTING AS5780 HPC CLASS (POLYOL) RESISTANT MATERIAL (ALSO KNOWN AS EASTMAN REFERENCE OIL 300)
ISO 3601-1:2012	Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes
ASTM D 1329 : 2016 : REDLINE	Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)
ISO 3601-3:2005	Fluid power systems O-rings Part 3: Quality acceptance criteria
ASTM D 471 : 2016-02	TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS
ASTM D 1418 : 2017 : REDLINE	Standard Practice for Rubber and Rubber Latices—Nomenclature
SAE ARP 3050 : 2007	SUITABLE TEST SIZES FOR O-RING SPECIFICATIONS