SAE AMS QQ N 290 : 2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
NICKEL PLATING (ELECTRODEPOSITED)
Available format(s)
Hardcopy , PDF
Superseded date
10-25-2021
Language(s)
English
Published date
07-06-2015
Publisher
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. NOTES
Applies typically for electrodeposited nickel plating on steel, copper and copper alloys, and zinc and zinc alloys, but usage is not limited to such applications.
| Committee |
AMS B
|
| DevelopmentNote |
Supersedes QQ N 290. (03/2007)
|
| DocumentType |
Revision
|
| Pages |
12
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| QQ-N-290 Revision A:1971 | Similar to |
| MIL-PRF-55629-20 Revision G:2010 | CIRCUIT BREAKERS, MAGNETIC, PANEL SEAL, TRIP-FREE, SERIES TRIP, SINGLE POLE (0.2 TO 30 AMPERES) |
| MIL-DTL-55302-94 Revision F:2010 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, INSERT (INSULATOR), RECTANGULAR, POLARIZED, REMOVABLE, CRIMP TYPE HERMAPHRODITIC CONTACTS (.100 INCH SPACING) |
| DSCC 04028 : 0 | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 452 CONTACT POSITIONS |
| MIL-DTL-55302-190 Revision B:2011 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 100 POSITIONS, PRINTED WIRING BOARD (.075 SPACING) |
| MIL-DTL-55302-163 Revision D:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PLUG, 72, 84, 96, AND 120 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC |
| DSCC 93007 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 296 CONTACT POSITIONS |
| DSCC 87058 : F#CAN | CIRCUIT BREAKERS, MAGNETIC, LOW-POWER, SEALED, TRIP-FREE, SHOCK ENHANCED, THREE-POLE |
| MIL-DTL-55235 Revision A:2003 | CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES TPS, GENERAL SPECIFICATION |
| MIL-DTL-55302-54 Revision C:2003 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Straight-Thru, Hermaphroditic Contact for Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-55302-5 Revision F:2008 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, Straight-thru, for Multilayered Printed Wiring Boards (.100 Spacing) |
| MS75093 Revision B:2013 | Adapter, Connector, Series BNC Socket Contact to GR-874 Hermorphroditic |
| MIL-DTL-23971 Revision E:2017 | POWER DIVIDERS, POWER COMBINERS, AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR |
| MIL-DTL-55302-111 Revision B:2006 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contacts, Straight-Thru, for Multilayered Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-55302-93 Revision F:2010 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, INSERT (INSULATOR), RECTANGULAR, POLARIZED, REMOVABLE CRIMP TYPE, HERMAPHRODITIC CONTACTS (.100 INCH SPACING) |
| MIL-DTL-39030-14 Revision B:2003 | DUMMY LOAD, ELECTRICAL, TYPE 14 (BIFURCATED CONTACT), STRIPLINE, LOW POWER |
| MIL-DTL-39030-13 Revision B:2003 | DUMMY LOAD, ELECTRICAL, TYPE 14 (SOCKET CONTACT), STRIPLINE, LOW POWER |
| MIL-DTL-28748-19 Base Document:2005 | CONNECTORS, ELECTRICAL, RECTANGULAR, RACK AND PANEL, PRINTED WIRING BOARD (PWB) MOUNT, STRAIGHT THROUGH, SOCKET CONTACTS, SIZE 22 |
| MIL-DTL-39030-7 Revision A:2003 | DUMMY LOADS, ELECTRICAL, COAXIAL, TYPE 3 (BNC), LOW POWER |
| MIL-DTL-10884 Revision H:2005 | FASTENERS, SNAP |
| MIL-DTL-39030-6 Revision C:2012 | DUMMY LOADS, ELECTRICAL, COAXIAL, TYPE 5 (N), LOW POWER |
| I.S. EN 3373-008:2012 | AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRIC CONDUCTORS - PART 008: COPPER LUGS NICKEL PLATED RING SHAPED FOR COPPER CONDUCTORS NICKEL PLATED FOR INCH SERIES STUDS UP TO 340 DEGREES C - PRODUCT STANDARD |
| MIL-DTL-55302-161 Revision D:2004 | Connectors, Printed Circuit Subassembly and Accessories, Receptacle, 160 Contact Positions, for Printed Wiring Boards, 2.54 MM X 1.27 MM Offset Grid, Metric |
| BS EN 3373-014:2009 | Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 200°C. Product standard |
| A-A-55469 Revision B:2015 | CONNECTORS, ELECTRICAL, PLUGS, TIP (TEST POINT PLUG, BANANA PLUG) GENERAL REQUIREMENTS FOR |
| MIL-DTL-55302-61 Revision G:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, AND 66 FOR PRINTED WIRING BOARDS (.100 SPACING) |
| MIL-DTL-55302-63 Revision H:2008 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING) |
| MIL-DTL-55302-62 Revision H:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING) |
| MIL-DTL-55302-2 Revision F:2008 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contacts, Straight-thru, for Printed Wiring Boards (.150 Spacing) |
| MIL-DTL-62011-2 Base Document:2009 | Pump, Fuel, Electrically-Operated: 24-Volt DC, In-Tank Type, Side-Mounted Connector, Type II |
| MIL-DTL-55302-53 Revision C:2003 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Right-Angle, Hermaphroditic Contact for Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-21097-16 Revision F:2005 | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD CONTACT, CRIMP, REMOVABLE, TYPE CR |
| DSCC 86092 : B | HOLDER, ELECTRICAL CARD, CARD GUIDE-RETAINER, LEVER ACTUATED, METAL, FOR COLD PLATE MOUNTING |
| MIL-DTL-22992 Revision H:2015 | Connectors, Plugsand Receptacles, Electrical, Waterproof, Quick Disconnect, Heavy Duty Type, General Specification for |
| MIL-STD-868 Revision B:2007 | Nickel Plating, Low Embrittlement, Electro-Deposition |
| MIL-DTL-39030 Revision F:2014 | DUMMY LOADS, ELECTRICAL, COAXIAL AND STRIPLINE, GENERAL SPECIFICATION FOR |
| MIL-DTL-21604 Revision G:2017 | Switches, Rotary, Multipole and Selector, General Specification for |
| MIL-DTL-28731-23 Revision G:2004 | CONNECTOR ELECTRICAL, CONTACT, FORK TYPE, REMOVABLE, DOUBLE WIRE CRIMP |
| DSCC 93012 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 280 CONTACT, 2 POWER POSITIONS |
| DSCC 03023 : A | CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 396 CONTACT POSITIONS |
| DSCC 84168 : F | HOLDER, ELECTRICAL CARD, CARD GUIDE-RETAINER, LEVER ACTUATED, METAL |
| DSCC 93002 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 372 CONTACT POSITIONS |
| NFPA 99 : 2018 | HEALTH CARE FACILITIES CODE |
| IPC AJ 820 : A | ASSEMBLY AND JOINING HANDBOOK |
| MS3186 Revision G:2011 | CONNECTOR, MOUNTING TO CONNECTORS, MOUNTING NUTS, PLAIN HEXAGON |
| MIL-PRF-39012 Revision F:2014 | CONNECTORS, COAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR |
| IPC 2221 GERMAN : B | GENERIC STANDARD ON PRINTED BOARD DESIGN |
| MIL B 18 : F | BATTERIES, NON-RECHARGEABLE, DRY |
| MIL-DTL-917 Revision F:2014 | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR |
| MIL-DTL-28754-62 Revision A:2016 | CONNECTORS, ELECTRICAL, MODULAR, TYPE 4, CONNECTOR, 100 PIN, CENTER, CROSSOVER, CONTACT TAILS ON .050 CENTERS |
| MIL-DTL-28748 Revision D:2001 | CONNECTOR, PLUG AND RECEPTACLE, RECTANGULAR, RACK AND PANEL SOLDER TYPE AND CRIMP TYPE CONTACTS - GENERAL SPECIFICATION FOR |
| MIL-DTL-5523 Revision E:2011 | VALVE; RELIEF, HYDRAULIC PRESSURE |
| MIL-STD-1353 Revision C:2014 | ELECTRICAL CONNECTORS, PLUG-IN SOCKETS AND ASSOCIATED HARDWARE, SELECTION AND USE OF |
| MIL-DTL-45913 Revision D:2011 | NUTS, SELF-LOCKING, HEXAGON, PREVAILING TORQUE |
| A-A-59590 Revision D:2014 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 3 PIECE, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR |
| MIL DTL 28754/60 : A | CONNECTORS, ELECTRICAL, MODULAR, TYPE 4, CONNECTOR, 100 PIN, CENTER CONTACT TAILS ON .100 CENTERS |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| MIL-DTL-28754-59 Revision A:2016 | CONNECTORS, ELECTRICAL, MODULAR, TYPE 4, CONNECTOR, 100 PIN, CENTER CONTACT TAILS ON .100 CENTERS (CERAMIC COMPATIBLE) |
| A-A-59789 Revision B:2014 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR |
| MIL-DTL-55302-92 Revision F:2010 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, STRAIGHT-THRU, HERMAPHRODITIC CONTACTS (.100 INCH SPACING) |
| MIL-DTL-3933 Revision L:2014 | Attenuators, Fixed, Space Level, Non-Space Level General Specification for |
| MIL-DTL-2726 Revision C:2006 | RECEPTACLE, RECEPTACLE PLUGS, SWITCH AND RECEPTACLES, AND OUTLETS (ELECTRICAL), GENERAL SPECIFICATION FOR |
| DSCC 87075 : F | RESISTOR, FIXED, FILM, CHIP, FLANGE MOUNT, DOUBLE TAB, HIGH POWER 10 WATTS |
| MIL-DTL-28748-18 Base Document:2005 | CONNECTORS, ELECTRICAL, RECTANGULAR, RACK AND PANEL, PRINTED WIRING BOARD (PWB) MOUNT, STRAIGHT THROUGH, PIN CONTACTS, SIZE 22 |
| BS EN 3373-008:2012 | Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors Copper lugs nickel plated ring shaped for copper conductors nickel plated for inch series studs up to 340 °C. Product standard |
| MIL-DTL-55302-20 Revision E:2004 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contact, Straight-Thru, for Printed Wiring Boards (.150 Spacing) |
| MIL-DTL-55302-164 Revision D:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PLUG AND/OR RECEPTACLE, 160 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC |
| DSCC 02007 : A | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 396 CONTACT POSITIONS |
| BS IEC 63004:2015 | Standard for receiver fixture interface |
| MIL-DTL-28754-35 Revision F:2015 | CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR, TYPE 3, MALE CONTACT AND INSULATOR BUSHING SET, REMOVABLE WIRE WRAPPOST TERMINAL |
| MIL-DTL-55302-159 Revision D:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE, 17, 29, 33, 41, 53, AND 65 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC |
| MIL-DTL-55302-8 Revision F:2006 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contacts, Straight-thru, for Multilayered Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-55302-1 Revision E:2008 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, RIGHT-ANGLE, FOR PRINTED WIRING BOARDS (.150 SPACING) |
| MS90577 Revision B:2012 | ADAPTER, CONNECTOR, SERIES UHF TO SERIES BNC, TYPE UG-273/U |
| MIL-DTL-55302-55 Revision G:2004 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Socket Contacts, Decade Increments 10 thru 70 Contact Positions and Intermediate Positions of 14, 24, 44, 54 and 26, 36, 56, 66 for Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-28731 Revision F:2007 | CONNECTORS, ELECTRICAL, RECTANGULAR, REMOVABLE CONTACT, FORMED BLADE, FORK TYPE (FOR RACK AND PANEL AND OTHER APPLICATIONS) |
| A-A-59950 Base Document:2014 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 7 BODY, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR |
| MIL-DTL-55302-17 Revision B:2004 | Connectors, Printed Circuit Subassembly and Accessories: Socket, Straight-Thru, for Printed Wiring Boards (.200 Spacing) |
| MS90579 Revision B:2012 | Adapter, Connector, Between Series (Series QL Socket to Series C Socket) Jam Nut Mount, Type UG-1375/U |
| MIL-DTL-25516 Revision F:2004 | CONNECTORS, ELECTRICAL, MINIATURE, COAXIAL, ENVIRONMENT RESISTANT TYPE, GENERAL SPECIFICATION FOR |
| MIL-DTL-28837 Revision D:2015 | MIXER STAGES, RADIO FREQUENCY GENERAL SPECIFICATION FOR |
| MIL-DTL-55302-167 Revision B:2005 | Connectors, Printed Circuit Subassembly and Accessories: Low Mating Force, Male Brush, Straight-Through, Polarized, with Wrappost Termination (.100 Spacing) |
| MIL-DTL-39030-5 Revision C:2003 | DUMMY LOADS, ELECTRICAL, COAXIAL, TYPE 4 (TNC), LOW POWER |
| MIL-DTL-39030-3 Revision E:2013 | DUMMY LOADS, ELECTRICAL, COAXIAL, TYPE 1 (SMA), LOW POWER |
| MIL-DTL-3933-27 Base Document:2004 | ATTENUATORS, FIXED, COAXIAL LINE (SMP CONNECTORS - SMP FULL DETENT MALE TO SMP FULL DETENT MALE), FREQUENCY RANGE: DC TO 18 GHZ |
| MIL-DTL-39030-11 Revision A:2003 | DUMMY LOAD, ELECTRICAL, COAXIAL, TYPE 5 (N), HIGH POWER |
| MS90261 Revision E:2012 | ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, BETWEEN SERIES (SERIES C JACK TO SERIES HN PLUG) TYPE UG-703 A/U |
| MIL-DTL-55302-134 Revision B:2005 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle Socket Contacts, Straight thru 32 or 64 Contact Positions, for Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-83503 Revision C:2005 | Connectors, Electrical, Flat Cable, and/or Printed Wiring Board, Nonenvironmental General Specification for |
| MIL-DTL-55302-132 Revision C:2015 | CONNECTORS, PLUG, ELECTRICAL, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: SOCKET CONTACTS, STRAIGHT THRU, 64 OR 96 CONTACT POSITION FOR PRINTED WIRING BOARDS (.100 SPACING) |
| NASA PRC 5004 : 2004 | PROCESS SPECIFICATION FOR ELECTRODEPOSITED NICKEL PLATING |
| MIL-DTL-39030-16 Revision B:2003 | DUMMY LOAD, ELECTRICAL, TYPE 14 (BIFURCATED CONTACT), STRIPLINE, LOW POWER |
| MS3473 Revision B:2007 | CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 2, HERMETIC, SOLDERLESS, SOLDER MOUNTING, BAYONET COUPLING, CLASS N |
| MIL-DTL-55302-57 Revision H:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING) |
| MIL-DTL-38999 Revision M:2015 | Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded or Breech Coupling), Environment Resistant with Crimp Removable Contacts or Hermetically Sealed with Fixed, Solderable Contacts, General Specification for |
| MIL-DTL-55302-21 Revision F:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACT, RIGHT-ANGLE, 92 COMPOSITE CONTACT, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING) |
| MIL-DTL-55302-6 Revision J:2005 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contacts, Straight-thru, for Multilayered Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-28754 Revision E:2016 | Connectors, Electrical, Modular, and Component Parts General Specification for |
| SAE AMS 2460 : 2013 | PLATING, CHROMIUM |
| DSCC 93005 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 300 CONTACT, 8 FIBER OPTIC POSITIONS |
| MIL-STD-186 Revision F:2002 | PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS |
| MIL-PRF-55629-21 Revision G:2010 | CIRCUIT BREAKERS, MAGNETIC, PANEL SEAL, TRIP-FREE, SERIES TRIP, DOUBLE POLE (0.2 TO 30 AMPERES) |
| DSCC 87057 : F | CIRCUIT BREAKERS, MAGNETIC, LOW-POWER, SEALED, TRIP-FREE, SHOCK ENHANCED, TWO-POLE, AUXILIARY CONTACTS |
| MIL-DTL-55302-7 Revision E:2006 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, RIGHT-ANGLE, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING) |
| MIL-STD-1130 Revision C:2012 | Connections, Electrical, Solderless Wrapped |
| DSCC 87056 : F | CIRCUIT BREAKERS, MAGNETIC, LOW-POWER, SEALED, TRIP-FREE, SHOCK ENHANCED, TWO-POLE |
| MIL-DTL-55302-169 Revision B:2005 | Connectors, Printed Circuit Subassembly and Accessories: Low Mating Force, Female Brush, Straight-Through, Polarized, (.100 Spacing) |
| MIL-DTL-26482 Revision H:2007 | Connectors, Electrical, Circular, Miniature, Quick Disconnect, Environment Resisting, Receptacles and Plugs, General Specification for |
| MS27308 Revision C:2011 | CONNECTOR, BATTERY CELL, OFFSET |
| MIL-DTL-28748-21 Base Document:2005 | Connectors, Electrical, Rectangular, Rack and Panel, Printed Wiring Board (PWB) Mount, Right Angle, Socket Contacts, Size 22 |
| MIL-PRF-55339-45 Revision B:2015 | ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, IN-LINE, (BETWEEN SERIES SMA PLUG TO SERIES BNC PLUG), CLASS 2 |
| MIL-PRF-55339 Revision C:2005 | Adapters, Connectors, Coaxial, Radio Frequency, (Between Series and within Series), General Specification for |
| MIL-DTL-55302-89 Revision E:2006 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, RIGHT ANGLE, HERMAPHRODITIC CONTACTS (.100 SPACING) |
| MIL-DTL-55302-18 Revision B:2004 | Connectors, Printed Circuit Subassembly and Accessories: Pin, Straight-Thru, for Printed Wiring Boards (.200 Spacing) |
| MIL-DTL-83538 Revision D:2006 | CONNECTORS AND ACCESSORIES, ELECTRICAL, CIRCULAR, UMBILICAL, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS FOR MIL-STD-1760 APPLICATIONS (METRIC), GENERAL SPECIFICATION FOR |
| MIL-DTL-55302-52 Revision D:2003 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Straight-Thru, Hermaphroditic Contact for Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-32234 Base Document:2007 | CONNECTORS, ELECTRICAL, ULTRA HIGH DENSITY, MODULAR, BLADE AND FORK, EIGHT ROW, GENERAL SPECIFICATION FOR |
| MIL-DTL-8348 Revision K:2008 | Gage Assemblies, Air Pressure, Dial Indicating Chuck Type, Self-Contained |
| MIL-DTL-55302-162 Revision D:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PLUG, 17, 29, 33, 41, 53, AND 65 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC |
| MIL-DTL-28754-37 Revision E:2015 | CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR, TYPE 3, FEMALE CONTACT AND POLARIZING BUSHING SET, REMOVABLE WIRE WRAPPOST TERMINAL |
| MIL-DTL-43607 Revision J:2007 | PADLOCK, KEY OPERATED, HIGH SECURITY, SHROUDED SHACKLE |
| MIL-DTL-6807 Revision F:2012 | Switches, Rotary, Selector Power, General Specification for |
| DSCC 93004 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 300 CONTACT, 8 FIBER OPTIC POSITIONS |
| MIL-DTL-62011-1 Base Document:2009 | PUMP, FUEL, ELECTRICALLY-OPERATED: 24-VOLT DC, IN-TANK TYPE, TOP-MOUNTED CONNECTOR, TYPE 1 |
| DSCC 93013 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 280 CONTACT, 2 POWER POSITIONS, WITH SAFETY GROUND |
| MIL-DTL-15291 Revision G:2013 | SWITCHES, ROTARY, SNAP ACTION AND DETENT/SPRING RETURN ACTION, GENERAL SPECIFICATION FOR |
| MIL-DTL-55302-96 Revision F:2008 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, WRAPPOST (REMOVABLE) HERMAPHRODITIC CONTACTS (.100 INCH SPACING) |
| A-A-55563 Revision D:2013 | Holder, Electrical Card, Metal Card Guide, General Requirements for |
| MIL-DTL-55302-160 Revision D:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE, 72, 84, 96, AND 120 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC |
| MS90578 Revision C:2012 | ADAPTER, CONNECTOR, (TWIN BINDING POST-BNC MALE) TYPE UG-1441/U |
| DSCC 93006 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 296 CONTACT, 2 POWER POSITIONS |
| MIL-DTL-55116 Revision D:2013 | CONNECTORS: MINIATURE AUDIO, FIVE-PIN AND SIX-PIN - GENERAL SPECIFICATION FOR |
| MIL-DTL-55181 Revision F:2012 | CONNECTORS, PLUG AND RECEPTACLE, INTERMEDIATE POWER (ELECTRICAL, WATERPROOF), TYPE MW, GENERAL SPECIFICATION FOR |
| MIL-DTL-55302-4 Revision F:2008 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, RIGHT-ANGLE, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING) |
| MIL-DTL-55302-56 Revision H:2004 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Pin Contacts, Decade Increments 10 thru 70 Contact Positions and Intermediate Positions of 14, 24, 44, 54 and 26, 36, 56, 66 for Printed Wiring Boards (.100 Spacing) |
| DSCC 93003 : C | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 372 CONTACT POSITIONS |
| MIL-DTL-55302-192 Revision A:2006 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, 122 AND 152 POSITIONS, PRINTED WIRING BOARD (.075 SPACING) |
| MIL-DTL-2 Revision G:2006 | VALVES, CYLINDER, GAS (FOR COMPRESSED OR LIQUEFIED GASES), GENERAL SPECIFICATION FOR |
| MIL-DTL-55302-66 Revision G:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING) |
| MIL-DTL-12883-50 Revision B:2003 | Sockets and Accessories for Plug-in Electronic Components, Brackets and Socket Assembly for Relays, 2-Pole, 10 Amperes (MIL-PRF-6106 and MIL-PRF-83536) |
| MS3479 Revision C:2007 | CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 2, HERMETIC, SOLDERLESS, REAR MOUNTING, JAM NUT, BAYONET COUPLING, CLASS N |
| MIL-DTL-39030-23 Base Document:2015 | DUMMY LOAD, ELECTRICAL, COAXIAL, TYPE 1 (SMK), DC-32.0 GHZ |
| MIL-DTL-55302-170 Revision B:2005 | Connectors, Printed Circuit Subassembly and Accessories: Low Mating Force, Female Brush, Right Angle, Polarized, For Multilayered Printed Wiring Board (.100 Spacing) |
| MIL-DTL-28754-34 Revision E:2015 | CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR, TYPE 3, FEMALE CONTACT AND INSULATOR BUSHING SET, REMOVABLE WIRE WRAPPOST TERMINAL |
| MIL-DTL-55302-133 Revision C:2005 | Connectors, Plug, Electrical, Printed Circuit Subassembly and Accessories: Right Angle, Pin Contacts, 32 or 64 Contact Position for Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-39030-21 Revision B:2017 | Dummy Loads, Electrical, Type XIV (Tab Contact), Stripline, Medium Power |
| MIL-DTL-21097-4 Revision G:2008 | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD COMPOSITE, RECEPTACLE, CONTACT SPACING (.200) ALTERNATE DUAL ROW, TYPE CR |
| SAE AS 19692 : 2016 | Aerospace – Military Type Variable Delivery, Pressure Compensated Hydraulic Pump |
| MS3442 Revision C:2007 | CONNECTORS, RECEPTACLE, ELECTRICAL, WIDE FLANGE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT, CLASS H, SERIES 2 |
| SAE AS 5590 : 2013 | CONNECTORS, FIBER OPTIC, ADVANCED, CIRCULAR OR RECTANGULAR, PLUG AND RECEPTACLE, ENVIRONMENT RESISTANT, REMOVABLE TERMINI/CONTACTS, GENERAL SPECIFICATION FOR |
| MIL-DTL-12883-42 Revision F:2004 | SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS (POWER TRANSISTOR, 2 CONTACT, 10 AMPERES, TO-3), RADIAL |
| DSCC 93011 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 284 CONTACT, 8 FIBER OPTIC AND SAFETY GROUND |
| DSCC 04054 : 0 | RELAYS, ELECTROMAGNETIC, 25 AMPERES, 3 PDT, CONTINUOUS DUTY, HERMETICALLY SEALED, PERMANENT MAGNET DRIVE, AC COIL |
| SAE AS 81824 : 2016 | SPLICE, ELECTRIC, CRIMP, COPPER, ENVIRONMENT RESISTANT |
| SAE AS 39029 : 2017 | CONTACTS, ELECTRICAL CONNECTOR, GENERAL SPECIFICATION FOR |
| SAE AMS P 81728 : 2015 | PLATING, TIN-LEAD (ELECTRODEPOSITED) |
| MIL-DTL-39024 Revision C:2014 | JACK, TIP (TEST POINT, PANEL OR PRINTED WIRING TYPE), GENERAL SPECIFICATION FOR |
| NASA MSFC STD 2907 : 2006 | WORKMANSHIP STANDARD FOR PRINTED WIRING BOARDS |
| MIL-B-49030 Revision A:2010 | BATTERIES, DRY (ALKALINE) |
| MIL-DTL-28754-47 Revision C:2015 | CONNECTORS, ELECTRICAL MODULAR, TYPE 4, CONNECTOR, 100 PIN, RIGHT ANGLE CONTACT TAILS ON .100 CENTERS |
| UNI EN 3373-008 : 2012 | AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRIC CONDUCTORS - PART 008: COPPER LUGS NICKEL PLATED RING SHAPED FOR COPPER CONDUCTORS NICKEL PLATED FOR INCH SERIES STUDS UP TO 340 DEGREES C - PRODUCT STANDARD |
| MIL-PRF-55629-22 Revision G:2010 | CIRCUIT BREAKERS, MAGNETIC, PANEL SEAL, TRIP-FREE, SERIES TRIP, THREE POLE (0.2 TO 30 AMPERES) |
| DSCC 88052 : D | HOLDER, ELECTRICAL CARD, CARD GUIDE-RETAINER, SCREW ACTUATED, METAL |
| MIL-DTL-55302 Revision G:2009 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES |
| MIL-R-19309 Revision D:2003 | RELAY, SENSITIVE (FOR TORPEDO MARK 37 MOD 2) |
| MIL-DTL-55302-131 Revision D:2007 | CONNECTORS, PLUG, ELECTRICAL, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RIGHT ANGLE, PIN CONTACTS, 64 OR 96 CONTACT POSITION FOR PRINTED WIRING BOARDS (.100 SPACING) |
| MIL R 5757 : K | RELAYS, ELECTROMAGNETIC, GENERAL SPECIFICATION FOR |
| MIL-DTL-83723 Revision H:2016 | CONNECTORS, ELECTRICAL, CIRCULAR, ENVIRONMENT RESISTING AND HERMETICALLY SEALED, RECEPTACLES AND PLUGS, GENERAL SPECIFICATION FOR |
| DSCC 85020 : G | HOLDER, ELECTRICAL CARD, CARD GUIDE, METAL, WITHOUT FLARED ENTRY |
| MIL-DTL-55302-138 Revision C:2004 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin, 160 Contact Positions, for Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-24308 Revision G:2009 | Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack and Panel, General Specification for |
| MIL-DTL-55302-157 Revision B:2005 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, STRAIGHT THRU CONTACTS, 64 OR 96 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.100 INCH SPACING) |
| MIL-DTL-21097-17 Revision E:2005 | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD CONTACT, SOLDER, REMOVABLE, TYPE CR |
| MS3443 Revision C:2011 | CONNECTORS, RECEPTACLE, ELECTRICAL, SOLDER OR WELDED FLANGE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT, CLASS H, SERIES 2 |
| MIL-PRF-49142 Revision B:2004 | CONNECTOR, TRIAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR |
| MIL-DTL-55302-154 Revision C:2005 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, MOUNTING HARDWARE FOR PRINTED WIRING BOARDS |
| MIL-DTL-3933-28 Base Document:2004 | ATTENUATORS, FIXED, COAXIAL LINE (SMP CONNECTORS - SMP FULL DETENT MALE TO SMP FULL DETENT MALE), 0 DB, FREQUENCY RANGE: DC TO 18 GHZ |
| MIL-DTL-21097-5 Revision G:2008 | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD MALE ADAPTER, CONTACT SPACING (.200) ALTERNATE DUAL ROW, TYPE CS |
| MIL-DTL-55302-158 Revision C:2005 | Connectors, Printed Circuit Subassembly and Accessories; Receptacle Socket Contacts, 64 or 96 Contact Positions, for Printed Wiring Boards (.100 Inch Spacing) |
| DSCC 89099 : H | RESISTOR, FIXED, FILM, CHIP, FLANGE MOUNT, SINGLE TAB, HIGH POWER, 10 WATTS |
| MS3477 Revision B:2007 | CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 2, HERMETIC, SOLDERLESS, BOX MOUNTING, BAYONET COUPLING, CLASS N |
| MIL-DTL-55302-16 Revision C:2004 | Connectors, Printed Circuit Subassembly and Accessories: Pin, Right-Angle, for Printed Wiring Boards (.200 Spacing) |
| MIL-DTL-28754-36 Revision E:2015 | CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR, TYPE 3, FEMALE CONTACT AND GROUNDING BUSHING SET, REMOVABLE WIRE WRAPPOST TERMINAL |
| MIL S 83505 : B | SOCKET, (LEAD ELECTRONIC COMPONENTS) GENERAL SPECIFICATION FOR |
| MIL-DTL-83517 Revision B:2015 | Connector, Coaxial, Radio Frequency for Coaxial, Strip or Microstrip Transmission Line General Specification for |
| MIL-STD-1276 Revision H:2013 | Leads for Electronic Component Parts |
| MIL-DTL-55302-97 Revision D:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: CONTACTS, HERMAPHRODITIC, CRIMP REMOVABLE FOR WIRE (STRANDED) |
| DSCC 93009 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 356 CONTACT, WITH SAFETY GROUND |
| DSCC 86100 : D | CONNECTORS, ELECTRICAL, UNSHROUDED HEADERS, PWB TERMINATION |
| DSCC 87054 : F | CIRCUIT BREAKERS, MAGNETIC, LOW-POWER, SEALED, TRIP-FREE, SHOCK ENHANCED, ONE-POLE |
| MIL-DTL-39030-20 Revision D:2017 | Dummy Loads, Electrical, Type XIV (Tab Contact), Stripline, Low Power |
| MIL-DTL-55302-19 Revision E:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS RIGHT-ANGLE, 41 COMPOSITE CONTACT, FOR PRINTED WIRING BOARDS (.150 SPACING) |
| MIL-DTL-55302-60 Revision J:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 90, 100 AND 120 CONTACT POSITIONS (.100 SPACING) |
| MIL-DTL-55302-191 Revision C:2011 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 10 THRU 100 POSITIONS, PRINTED WIRING BOARD (.075 SPACING) |
| MIL-DTL-55302-65 Revision H:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING) |
| MIL-DTL-21097-3 Revision F:2005 | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD COMPOSITE, ADAPTER, CONTACT SPACING (.200) INDIVIDUAL CONTACTS, TYPE CS |
| MIL-DTL-7793 Revision H:2016 | METER, TIME TOTALIZING |
| DSCC 87062 : F | CIRCUIT BREAKERS, MAGNETIC, PANEL SEAL, SHOCK ENHANCED, TRIP-FREE, SERIES TRIP, THREE POLE, (0.2 TO 30 AMPERES) |
| DSCC 87055 : G | CIRCUIT BREAKERS, MAGNETIC, LOW-POWER, SEALED, TRIP-FREE, SHOCK ENHANCED, ONE-POLE, AUXILIARY CONTACTS |
| DSCC 86037 : B | CONNECTORS, RECEPTACLE, ELECTRICAL, LATCH HOUSINGS, CRIMP TO WIRE CONTACTS, GENERAL DRAWING FOR |
| PREN 3373-014 : 200P1 | AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRIC CONDUCTORS - PART 014: IN-LINE SPLICES, INSULATED AND SEALED, FOR CRIMPING ON COPPER CONDUCTORS, TEMPERATURE UP TO 200 DEGREES C PRODUCT STANDARD |
| DSCC 87059 : F | CIRCUIT BREAKERS, MAGNETIC, LOW-POWER, SEALED, TRIP-FREE, SHOCK ENHANCED, THREE-POLE, AUXILIARY CONTACTS |
| SAE AS 12500 : 2018 | CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES |
| IEC 63004:2015 | Standard for receiver fixture interface |
| DSCC 87060 : F | CIRCUIT BREAKERS, MAGNETIC, PANEL SEAL, SHOCK ENHANCED, TRIP-FREE, SERIES TRIP, SINGLE POLE, (0.2 TO 30 AMPERES) |
| EN 3373-014:2009 | Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 014: In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 200 °C - Product standard |
| EN 3373-008:2012 | Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 008: Copper lugs nickel plated ring shaped for copper conductors nickel plated for inch series studs up to 340 °C - Product standard |
| MIL-DTL-9398 Revision D:2007 | GENERATOR, TACHOMETER, TWO-POLE, HIGH TEMPERATURE, AIRCRAFT |
| MIL-DTL-28754-61 Revision A:2016 | CONNECTORS, ELECTRICAL, MODULAR, TYPE 4, CONNECTOR, 100 PIN, CENTER, CROSSOVER, CONTACT TAILS ON .100 CENTERS (CERAMIC COMPATIBLE) |
| DSCC 93010 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 284 CONTACT, 8 FIBER OPTIC AND SAFETY GROUND |
| MIL-DTL-55302-95 Revision E:2004 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Composite Wrappost, Hermaphroditic Contacts (.100 Inch Spacing) |
| MIL-DTL-32385 Base Document:2011 | CONNECTOR, RECEPTACLES, PLUGS, ADAPTER, USED ON ELECTROLUMINESCENT, EMBEDDED, AND PRINTED CIRCUIT BOARD LAMP LIGHTING PANELS |
| MIL-DTL-55302-64 Revision H:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING) |
| MIL-DTL-55302-59 Revision H:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 90, 100 AND 120 CONTACT POSITIONS FOR PRINTED WIRING BOARDS (.100 SPACING) |
| MIL-DTL-21097-2 Revision F:2005 | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD COMPOSITE, RECEPTACLE, CONTACT SPACING (.200) SINGLE ROW, TYPE CR |
| SAE ARP 1311 : 2015 | LANDING GEAR STRUCTURES AND MECHANISMS |
| MIL-PRF-83536 Revision F:2017 | RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 25 AMPERES AND BELOW, GENERAL SPECIFICATION FOR |
| MS3440 Revision D:2011 | CONNECTORS, RECEPTACLE, ELECTRICAL, NARROW FLANGE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT, CLASS H, SERIES 2 |
| MIL-DTL-39030-8 Revision A:2003 | DUMMY LOAD, ELECTRICAL, COAXIAL, TYPE 4 (TNC), MEDIUM POWER |
| MIL-DTL-21617 Revision B:2012 | CONNECTORS, PLUG AND RECEPTACLE, ELECTRICAL, RECTANGULAR, POLARIZED SHELL, MINIATURE TYPE, GENERAL SPECIFICATION FOR |
| MIL-DTL-83502 Revision E:2007 | Sockets, Plug-in Electronic Components, Round Style, General Specification for |
| MIL-STD-2193 Revision C:2012 | Ship Hydraulic System Components |
| MIL-DTL-28748-20 Base Document:2005 | Connectors, Electrical, Rectangular, Rack and Panel, Printed Wiring Board (PWB) Mount, Right Angle, Pin Contacts, Size 22 |
| MIL-DTL-83734 Revision H:2007 | SOCKETS, PLUG-IN ELECTRONIC COMPONENTS, DUAL-IN-LINE (DIPS) AND SINGLE-IN-LINE PACKAGES (SIPS), GENERAL SPECIFICATION FOR |
| MIL-DTL-28804 Revision D:1998 | CONNECTORS, PLUG AND RECEPTACLE, ELECTRIC, RECTANGULAR, HIGH DENSITY, POLARIZATION CENTER JACKSCREW - GENERAL SPECIFICATION FOR |
| MIL-DTL-5757 Revision N:2017 | RELAYS, ELECTROMAGNETIC, GENERAL SPECIFICATION FOR |
| MIL-DTL-55074-4 Revision D:2015 | CONTACT ASSEMBLY, ELECTRICAL |
| MIL-DTL-55302-58 Revision J:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING) |
| MIL-DTL-55302-98 Revision D:2004 | Connectors, Printed Circuit Subassembly and Accessories: Contact, Wrappost Removable Type |
| MIL-R-83726-7 Revision G:2015 | RELAYS, HYBRID, TIME DELAY, ON PICKUP, TYPE 1, CLASS A, 2 AMPERES, 2PDT, FIXED TIME, 0.06 TO 300 SECONDS |
| MIL-DTL-55302-171 Revision B:2005 | Connectors, Printed Circuit Subassembly and Accessories: Low Mating Force, Contact Brush |
| MS3481 Revision A:2007 | TOOL, CONNECTOR ASSEMBLY, FOR MIL-DTL-26482 CONNECTORS |
| MIL-O-52374 Revision E:2013 | Oscillator: High Voltage General Specification for |
| MIL-DTL-62011 Revision E:2009 | Pump, Fuel, Electrically-Operated: 24-Volt DC, In-Tank Type, General Specification for |
| MS3449 Revision E:2011 | CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 2, SINGLE HOLE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT, CLASS H |
| MIL-DTL-55302-166 Revision B:2005 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: LOW MATING FORCE, MALE BRUSH, STRAIGHT-THROUGH, POLARIZED, FOR MULTILAYERED PRINTING WIRING BOARDS (.100 SPACING) |
| MIL-DTL-5423 Revision E:2009 | BOOTS, DUST AND MOISTURE SEAL (FOR TOGGLE AND PUSH-BUTTON SWITCHES, CIRCUIT BREAKERS, AND ROTARY-ACTUATED PARTS), GENERAL SPECIFICATION FOR |
| MIL-DTL-39030-22 Revision A:2013 | DUMMY LOAD, ELECTRICAL, TYPE 14 (TAB CONTACT), STRIPLINE, HIGH POWER |
| DSCC 04027 : A | CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROWS, 452 CONTACT POSITIONS |
| MIL-DTL-55302-91 Revision F:2010 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, STRAIGHT-THRU, HERMAPHRODITIC CONTACTS (.100 INCH SPACING) |
| MIL-DTL-3643 Revision B:2003 | Connectors, Coaxial, Radio Frequency, Series HN, and Associated Fittings, General Specification for |
| MIL-DTL-83505 Revision C:2017 | SOCKETS, (LEAD, ELECTRONIC COMPONENTS) GENERAL SPECIFICATION FOR |
| MIL-DTL-55302-22 Revision F:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, STRAIGHT-THRU, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING) |
| MIL-R-83726-8 Revision F:2015 | RELAYS, HYBRID, TIME DELAY, (ON RELEASE), TYPE 2A, CLASS A, 2 AMPERES, 2PDT, FIXED TIME, 0.100 TO 300 SECONDS |
| MIL-DTL-12883-51 Revision B:2003 | SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, BRACKET AND SOCKET ASSEMBLY FOR RELAYS, 4-POLE, 10 AMPERES (MIL-PRF-6106, MIL-PRF-83536, AND MIL-PRF-83726) |
| MIL-PRF-55339-44 Revision C:2015 | ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, IN-LINE, (BETWEEN SERIES SMA JACK TO SERIES BNC PLUG), CLASS 2 |
| PREN 3373-008 : 200P1 | AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRICAL CONDUCTORS - PART 008: COPPER LUGS NICKEL PLATED RING SHAPED FOR COPPER CONDUCTORS NICKEL PLATED FOR INCH SERIES STUDS UP TO 340 DEGREES C - PRODUCT STANDARD |
| MIL-STD-1568 Revision D:2015 | Materials and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems |
| DSCC 93008 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 356 CONTACT, WITH SAFETY GROUND |
| I.S. EN 3373-014:2009 | AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRIC CONDUCTORS - PART 014: IN-LINE SPLICES, INSULATED AND SEALED, FOR CRIMPING ON COPPER CONDUCTORS, TEMPERATURE UP TO 200 DEGREE C - PRODUCT STANDARD |
| IPC 2221B:2012 | GENERIC STANDARD ON PRINTED BOARD DESIGN |
| IPC 2221 FRENCH : B2012 | GENERIC STANDARD ON PRINTED BOARD DESIGN |
| MIL-DTL-5002 Revision E:2011 | SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS |
| MIL-STD-1916 Base Document:1996 | DOD PREFERRED METHODS FOR ACCEPTANCE OF PRODUCT |
| SAE AMS 2750 : 2012 | PYROMETRY |
| SAE AMS 2759/9 : 2009 | HYDROGEN EMBRITTLEMENT RELIEF (BAKING) OF STEEL PARTS |
US$110.92
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.