BEARING, BALL, ANNULAR, GENERATOR AND MOTOR GENERATOR

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

10-09-2018

Publisher

SAE International

1. SCOPE AND CLASSIFICATION
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. NOTES

Sets up the requirements for antifriction ball bearings primarily intended for use in aircraft electrical generators and motor-generators.

Committee	ACBG
DevelopmentNote	Supersedes MIL B 22227 (A). (03/2008)
DocumentType	Standard
Pages	18
ProductNote	This standard is now stabilized
PublisherName	SAE International
Status	Current
Supersedes	MIL-B-22227 Revision A:1976 SAE AS 22227 : 2007

MIL-DTL-197 Revision M:2016	PACKAGING OF BEARINGS, ASSOCIATED PARTS AND SUBASSEMBLIES
ABMA 9 : 2015	LOAD RATINGS AND FATIGUE LIFE FOR BALL BEARINGS
SAE AS 17108 : 2014	BEARING, BALL, ANNULAR, PRIMARILY FOR AIRCRAFT GENERATORS AND MOTOR-GENERATORS, WIDE CARTRIDGE, TYPE 2
MIL-STD-130 Revision N:2007	IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
MIL-PRF-27617 Revision G:2011	GREASE, AIRCRAFT AND INSTRUMENT, FUEL AND OXIDIZER RESISTANT
MIL-STD-1647 Revision E:2003	IDENTIFICATION MARKINGS FOR DOMESTICALLY MANUFACTURED BEARINGS, BALL, ANNULAR FOR INSTRUMENTS AND PRECISION COMPONENTS
MIL-PRF-7808 Revision L:1997	LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE
ASME B89.3.1 : 1972	MEASUREMENT OF OUT-OF-ROUNDNESS
ASTM A 666 : 2015 : REDLINE	Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
ASTM A 693 : 2016 : REDLINE	Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
ABMA 10 : 1989	METAL BALLS
SAE AMS 5618 : 2017	STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C) (440C), CONSUMABLE ELECTRODE VACUUM MELTED
SAE AMS 6440 : 2015	STEEL, BARS, FORGINGS, AND TUBING, 1.45CR (0.93 - 1.05C) (SAE 52100), FOR BEARING APPLICATIONS
ASME B46.1 : 2009	SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
SAE AS 17107 : 2014	BEARING, BALL, ANNULAR, PRIMARILY FOR AIRCRAFT GENERATORS AND MOTOR-GENERATORS, STANDARD LIGHT, TYPE 1
ASTM F 2215 : 2015 : REDLINE	Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications
ASTM A 380 : 2006	Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
SAE AMS QQ S 763D : 2013(S2015)	STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS
ABMA 4 : 1994	TOLERANCE DEFINITIONS AND GAUGING PRACTICES FOR BALL AND ROLLER BEARINGS
SAE AMS 5880 : 2013	STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C) (SAE 51440C), FOR BEARING APPLICATIONS
MIL-PRF-23699 Revision G:2014	Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167
MIL-PRF-81322 Revision G:2005	GREASE, AIRCRAFT, GENERAL PURPOSE, WIDE TEMPERATURE RANGE, NATO CODE G-395
SAE AMS 2303 : 2016	STEEL CLEANLINESS, AIRCRAFT QUALITY, MARTENSITIC CORROSION-RESISTANT STEELS, MAGNETIC PARTICLE INSPECTION PROCEDURE
SAE AIR 4127 : 2015	STEEL: CHEMICAL COMPOSITION AND HARDENABILITY
SAE AS 17109 : 2014	BEARING, BALL, ANNULAR, PRIMARILY FOR AIRCRAFT GENERATORS AND MOTOR-GENERATORS, THIN EXTRA LIGHT, TYPE 3
SAE AMS 5630 : 2013	STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C) (440C)
SAE AMS 2700E : 2011	PASSIVATION OF CORROSION RESISTANT STEELS
ABMA 20 : 2011	RADIAL BEARINGS OF BALL, CYLINDRICAL ROLLER AND SPHERICAL ROLLER TYPES - METRIC DESIGN
MIL-C-11796 Revision C:1986	CORROSION PREVENTIVE COMPOUND, PETROLATUM, HOT APPLICATION
SAE AMS 6444 : 2015	STEEL, BARS, FORGINGS, AND TUBING, 1.45CR (0.93 - 1.05C) (SAE 52100), PREMIUM AIRCRAFT-QUALITY, CONSUMABLE ELECTRODE VACUUM REMELTED