COUPLING, FUEL LINE, FLEXIBLE, 125 PSI GENERAL SPECIFICATION FOR

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

05-02-2017

Publisher

SAE International

1. SCOPE
2. REFERENCES
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES

Provides flexible couplings for joining tubing with AS 5131 Type A beaded ends for use in aircraft fuel and vent systems.

Committee	G-3
DocumentType	Standard
Pages	26
ProductNote	This version is now stabilized.
PublisherName	SAE International
Status	Current
Supersedes	SAE AS 5356 : 2015

SAE AS 5131 : 2015	TUBE END - BEADED, DESIGN STANDARD
SAE AMS5659S : 2016	Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu<br>
SAE AS 567 : 2015	SAFETY CABLE, SAFETY WIRE, KEY WASHERS, AND COTTER PINS FOR PROPULSION SYSTEMS, GENERAL PRACTICES FOR USE OF
MIL-STD-129 Revision R:2014	Military Marking for Shipment and Storage
MIL-DTL-5624 Revision W:2016	TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5
MIL-STD-810 Revision G:2008	ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
SAE AMS 5643 : 2016	STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
SAE AMS T 9046 : 2002	TITANIUM AND TITANIUM ALLOY, SHEET, STRIP, AND PLATE
MIL-STD-889 Revision C:2016	DISSIMILAR METALS
SAE AMS 4965 : 2014	TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL 4.0V, SOLUTION HEAT TREATED AND AGED
SAE AMS QQ P 35 : 1998	PASSIVATION TREATMENTS FOR CORROSION-RESISTANT STEEL
MIL-STD-464 Revision C:2010	ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS
FED-STD-H28-2 Revision B:1991	Screw-Thread Standards for Federal Services Section 2 Unified Inch Screw Threads- UN and UNR Thread Forms
SAE AMS 4921 : 2016	TITANIUM BARS, WIRE, FORGINGS, AND RINGS COMMERCIALLY PURE, 70 KSI (483 MPA) YIELD STRENGTH
MIL A 8625 : F	ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS
SAE AMS QQ A 225/8 : 1998	ALUMINUM ALLOY 6061, BAR, ROD, WIRE, AND SPECIAL SHAPES; ROLLED, DRAWN, OR COLD FINISHED
MIL-HDBK-470 Revision A:1997	DESIGNING AND DEVELOPING MAINTAINABLE PRODUCTS AND SYSTEMS - VOLUME 1
SAE AS 1720 : 2013	FITTING END, COUPLING, FLEXIBLE, VARIABLE CAVITY, THREADED, FERRULE TYPE, DESIGN STANDARD
SAE AMS QQ A 225/6 : 1998	ALUMINUM ALLOY, 2024, BAR, ROD, AND WIRE; ROLLED, DRAWN, OR COLD FINISHED
SAE AS 1710 : 2014	COUPLING, FUEL, FLEXIBLE, VARIABLE CAVITY, THREADED TYPE WITH FERRULES
SAE AMS 5687 : 2012	NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WIRE, 74NI - 15.5CR - 8.0FE, ANNEALED
ASTM D 471 : 2016-02	TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS
SAE AS 29513 : 2016	PACKING, PREFORMED, HYDROCARBON FUEL RESISTANT, 'O' RING