SAE J 1349 : 2011
Current
Current
The latest, up-to-date edition.
ENGINE POWER TEST CODE - SPARK IGNITION AND COMPRESSION IGNITION - AS INSTALLED NET POWER RATING
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
09-20-2011
Publisher
1. SCOPE
2. REFERENCES
3. TERMS AND DEFINITIONS
4. SYMBOLS, UNITS, AND SUBSCRIPTS
5. REFERENCE TEST CONDITIONS AND
CORRECTIONS
6. LABORATORY AND ENGINE EQUIPMENT
7. LABORATORY TEST PROCEDURES
8. PRESENTATION OF RESULTS
9. TRANSIENT VEHICLE TESTING
10. NOTES
APPENDIX A
This standard is intended to provide a method to obtain repeatable measurements that accurately reflect true engine performance in customer service.
| DocumentType |
Revision
|
| Pages |
27
|
| ProductNote |
THIS STANDARD ALSO REFERS TO ISO 3046.
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
| SAE J 1470 : 2013 (R2018) | MEASUREMENT OF NOISE EMITTED BY ACCELERATING HIGHWAY VEHICLES |
| I.S. EN 16230-1:2013 | LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS |
| MIL-T-62021 Revision E:1992 | TRUCKS, PIPE AND SEWER CLEANER: HIGH PRESSURE WATER JET TYPE, 5680 LITER (1,500 GALLON), 12,700 KILOGRAMS (28,000 POUNDS) GVW, 4X2, MODIFIED COMMERCIAL |
| A-A-50766 Base Document:1984 | Bus, Motor, 16 Passenger |
| MIL-T-83823 Base Document:1991 | TRUCK, FIRE FIGHTING (STRUCTURAL OR BRUSH STRUCTURAL) |
| SAE J 336 : 2011 | SOUND LEVEL FOR TRUCK CAB INTERIOR |
| BS EN 16230-1 : 2013 | LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS |
| NFPA 37 : 2018 | INSTALLATION AND USE OF STATIONARY COMBUSTION ENGINES AND GAS TURBINES |
| NFPA 1901:2016 | AUTOMOTIVE FIRE APPARATUS |
| EN 62826:2014 | Surface cleaning appliances - Floor treatment machines with or without traction drive, for commercial use - Methods of measuring the performance |
| MIL-T-83303 Revision C:1988 | TRUCK, FIREFIGHTING, AIRFIELD RAMP, 4X4, A/S32P-20, TWIN AGENT, SKID MOUNTED |
| KKK-T-2807 Base Document:1992 | TRUCKS, LUBRICATING AND FUEL SERVICING 4 BY 2 AND 4 BY 4 |
| MIL-T-83965 Revision B:1990 | TRUCK, FIRE FIGHTING, A/S32P-10, FORCIBLE ENTRY |
| UNE-EN 62826:2015 | Surface cleaning appliances - Floor treatment machines with or without traction drive, for commercial use - Methods of measuring the performance |
| I.S. EN 62826:2014 | SURFACE CLEANING APPLIANCES - FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE, FOR COMMERCIAL USE - METHODS OF MEASURING THE PERFORMANCE |
| SAE J 1667 : 2018 | SNAP-ACCELERATION SMOKE TEST PROCEDURE FOR HEAVY-DUTY DIESEL POWERED VEHICLES |
| MIL-T-62032 Revision H:1991 | TRUCK, TANK, FUEL SERVICING, AND AIRCRAFT FUEL SERVICING, 1,000 - 4,000 GALLON, DIESEL & GASOLINE ENGINE DRIVEN, 16,000 GVW, 4X2, 4X4. 6 X 4 & 6X6 COMMERCIAL |
| MIL-T-13300 Revision E:1991 | TRUCKS, HOPPER: COAL DELIVERY, CONVEYER TYPE, DIESEL ENGINE DRIVEN,24,000 GVW, 4X2 AND 39,500 GVW, 6X4, MODIFIED COMMERCIAL |
| A-A-52612 Revision A:2010 | BUSES, MOTOR: COMPACT, FORWARD CONTROL, 8600 TO 13 500 POUNDS GVW, 12, 16 AND 20 PASSENGER, 4X2 |
| MIL-C-83821 Base Document:1990 | CRANE, WHEEL MOUNTED, CRASH, ROUGH TERRAIN, HYDRAULIC FULL REVOLVING, 4X4, DED, FIGHTER TYPE AIRCRAFT |
| KKK-T-2893 Base Document:1997 | TRUCK, AMMUNITION HANDLING: STAKE AND PLATFORM BODY, 24,000 POUNDS GVW, 4 BY 2 OR 4 BY 4 |
| CSA D270 : 2008 | MULTI-FUNCTIONAL ACTIVITY BUSES |
| D270-08 (R2013) | Multi-functional activity buses |
| CSA D250 : 2016 | SCHOOL BUSES |
| SAE J 1287 : 2017 | MEASUREMENT OF EXHAUST SOUND PRESSURE LEVELS OF STATIONARY MOTORCYCLES |
| MIL-B-45371 Revision R:1990 | BUSES, MOTOR: SUBURBAN AND INTERCITY, 41 TO 53 ADULT PASSENGER, 4X2, 6X2 AND 6X4, COMMERCIAL |
| SAE J 1309 : 2012 | TRAVEL PERFORMANCE AMD RATING PROCEDURE, CRAWLER MOUNTED HYDRAULIC EXCAVATORS, MATERIAL HANDLERS, KNUCKLE BOOM LOG LOADERS, AND CERTAIN FORESTRY EQUIPMENT |
| MIL-PRF-62321 Revision D:1997 | TRUCKS, TANK: POTABLE WATER, 1000 AND 2200 GALLON, DIESEL AND GASOLINE ENGINE DRIVEN, 19,000 AND 34,500 POUNDS GVW, 4X2, 4X4, AND 6X4, COMMERCIAL |
| MIL-T-45380 Revision E:1991 | TRUCKS, MAINTENANCE: EARTH AUGER, TURNTABLE BASE, DIESEL ENGINE DRIVEN, 28,000 POUNDS GVW, 4X4, MODIFIED COMMERCIAL |
| BS EN 62826:2014 | Surface cleaning appliances. Floor treatment machines with or without traction drive, for commercial use. Methods of measuring the performance |
| MIL-DTL-62462 Revision D:1998 | ENGINE, DIESEL, LIQUID-COOLED, 8 CYLINDER; 4 CYCLE, V-TYPE, 220 KW (295 HP) |
| SAE J 2393 : 1998 | SWING PERFORMANCE AND RATING PROCEDURE, MATERIAL HANDLERS, KNUCKLE BOOM LOG LOADERS AND CERTAIN FORESTRY EQUIPMENT |
| SAE J 1939/71 : 2016 | VEHICLE APPLICATION LAYER |
| SAE J 1995 : 2014 | ENGINE POWER TEST CODE - SPARK IGNITION AND COMPRESSION IGNITION - GROSS POWER AND TORQUE RATING |
| SAE J 1503 : 2004 | PERFORMANCE TEST FOR AIR-CONDITIONED, HEATED, AND VENTILATED OFF-ROAD SELF-PROPELLED WORK MACHINES |
| SAE J 1194 : 2016 | ROLLOVER PROTECTIVE STRUCTURES (ROPS) FOR WHEELED AGRICULTURAL TRACTORS |
| SAE J 1339 : 2015 | TEST METHOD FOR MEASURING PERFORMANCE OF ENGINE COOLING FANS |
| KKK-A-1822 Revision E:2002 | STAR-OF-LIFE AMBULANCE |
| MIL B 45367 : AA NOTICE 1 | BUSES, MOTOR: TRANSIT, AMBULANCE CONVERSION, FORWARD CONTROL, WITH HIGH HEADROOM, 30 AND 44 PASSENGER, 2 WHEEL DRIVE |
| SAE J 1444 : 2009 | PROCEDURE FOR EVALUATING TRANSIENT RESPONSE OF SMALL ENGINE DRIVEN GENERATOR SETS |
| SAE J 2723 : 2015 | ENGINE POWER TEST CODE - ENGINE POWER AND TORQUE CERTIFICATION |
| MIL-T-45305 Revision C:1991 | TRUCK. BOOKMOBILE: DIESEL OR GASOLINE ENGINE DRIVEN, 16,000 POUNDS GVW, 4X2, MODIFIED COMMERCIAL |
| KKK-B-1579 Revision B:1985 | BUSES, MOTOR: SCHOOL, WITH HIGH HEADROOM, 20-, 28-, 36-, 44-, 58-PASSENGER, TWO-WHEEL DRIVE |
| NFPA 1917 : 2016 | AUTOMOTIVE AMBULANCES |
| SAE J 331 : 2012 | SOUND LEVELS FOR MOTORCYCLES |
| CAN/CSA-B138.1-17/CAN/CSA-B138.2-17 | Portable oil-burning equipment - Packaged equipment requirements / Installation requirements |
| HI 1.3 : 2013 | ROTODYNAMIC CENTRIFUGAL PUMPS FOR DESIGN AND APPLICATION |
| IEC 62826:2014 | Surface cleaning appliances - Floor treatment machines with or without traction drive, for commercial use - Methods of measuring the performance |
| EN 16230-1:2013+A1:2014 | Leisure karts - Part 1: Safety requirements and test methods for karts |
| SAE J 2805 : 2015 | MEASUREMENT OF NOISE EMITTED BY ACCELERATING ROAD VEHICLES |
| SAE J 335 : 2012 | MULTIPOSITION SMALL ENGINE EXHAUST SYSTEM FIRE IGNITION SUPPRESSION |
| SAE J 2908 : 2017 | VEHICLE POWER TEST FOR ELECTRIFIED POWERTRAINS |
| DIN EN 16230-1:2015-04 | LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS |
| SAE J 1234 : 1985 | SPECIFICATIONS DEFINITIONS - OFF-ROAD WORK MACHINES |
| SAE J 1940 : 2012 | SMALL ENGINE POWER AND TORQUE RATING PROCEDURE |
| HI 2.3 : 2013 | ROTODYNAMIC VERTICAL PUMPS OF RADIAL, MIXED, AND AXIAL FLOW TYPES FOR DESIGN AND APPLICATION |
| SAE J 2022 : 2012 | CLASSIFICATION, NOMENCLATURE, AND SPECIFICATION DEFINITIONS FOR HORIZONTAL EARTHBORING MACHINES |
| SAE J 1342 : 2017 | TEST METHOD FOR DETERMINING POWER CONSUMPTION OF ENGINE COOLING FAN DRIVE SYSTEMS |
| SAE J 986 : 2013 | SOUND LEVEL FOR PASSENGER CARS AND LIGHT TRUCKS |
| ISO 4106:2012 | Motorcycles — Engine test code — Net power |
| CFR 40(PTS85.501-86.599.99) : JUL 2015 | PROTECTION OF ENVIRONMENT |
| CFR 40(PT86) : JUL 2000 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
| SAE J 1995 : 2014 | ENGINE POWER TEST CODE - SPARK IGNITION AND COMPRESSION IGNITION - GROSS POWER AND TORQUE RATING |
| ISO 9249:2007 | Earth-moving machinery — Engine test code — Net power |
| ISO 1585:1992 | Road vehicles Engine test code Net power |
| ISO 2288:1997 | Agricultural tractors and machines Engine test code Net power |
| SAE J 1312 : 1995 | PROCEDURE FOR MAPPING ENGINE PERFORMANCE - SPARK IGNITION AND COMPRESSION IGNITION ENGINES |
US$148.68
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.