IEC 61000-4-8 : 2.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-8: TESTING AND MEASUREMENT TECHNIQUES - POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST
|
SAE J 2847/6 : 2015
|
COMMUNICATION BETWEEN WIRELESS CHARGED VEHICLES AND WIRELESS EV CHARGERS
|
IEEE C93.3-2017
|
IEEE Standard Requirements for Power-Line Carrier Line Traps (30 kHz to 500 kHz)
|
SAE J 2931/6 : 2015
|
SIGNALING COMMUNICATION FOR WIRELESSLY CHARGED ELECTRIC VEHICLES
|
IEC 61000-3-11 : 2.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-11: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS - EQUIPMENT WITH RATED CURRENT <= 75 A AND SUBJECT TO CONDITIONAL CONNECTION
|
EN 62311:2008
|
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)
|
AAMI ISO 14117 : 2012
|
ACTIVE IMPLANTABLE MEDICAL DEVICES - ELECTROMAGNETIC COMPATIBILITY - EMC TEST PROTOCOLS FOR IMPLANTABLE CARDIAC PACEMAKERS, IMPLANTABLE CARDIOVERTER DEFIBRILLATORS AND CARDIAC RESYNCHRONIZATION DEVICES
|
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION)
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
|
ISO 7637-3:2016
|
Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
|
SAE J 2836/6 : 2013
|
USE CASES FOR WIRELESS CHARGING COMMUNICATION FOR PLUG-IN ELECTRIC VEHICLES
|
IEC 61000-6-2:2016
|
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
|
IEC 61000-4-11:2004+AMD1:2017 CSV
|
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
|
ISO 11452-4:2011
|
Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Harness excitation methods
|
ISO 7637-2:2011
|
Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only
|
SAE J 1211 : 2012
|
HANDBOOK FOR ROBUSTNESS VALIDATION OF AUTOMOTIVE ELECTRICAL/ELECTRONIC MODULES
|
IEC 61000-4-8:2009
|
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
|
IEC 61000-3-12:2011
|
Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase
|
IEC 61000-4-4:2012 RLV
|
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
|
ISO 10605:2008
|
Road vehicles — Test methods for electrical disturbances from electrostatic discharge
|
IEC 61000-4-6 : 4.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
|
IEC 61000-4-6:2013
|
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
|
EN 61000-4-3 : 2006 AMD 2 2010
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST
|
CISPR 25:2016
|
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers
|
SAE J 1772 : 2016
|
SAE ELECTRIC VEHICLE AND PLUG IN HYBRID ELECTRIC VEHICLE CONDUCTIVE CHARGE COUPLER
|
EN 55014-2:2015
|
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard
|
NFPA 70 : 2017
|
NATIONAL ELECTRICAL CODE
|
ISO 11452-2:2004
|
Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Absorber-lined shielded enclosure
|
IEC 61000-4-2:2008
|
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
|
ISO 11452-1:2015
|
Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology
|
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV
|
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
|
IEEE C95.1-2005
|
IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz
|
SAE J 3016 : 2016
|
TAXONOMY AND DEFINITIONS FOR TERMS RELATED TO ON-ROAD MOTOR VEHICLE AUTOMATED DRIVING SYSTEMS
|
IEC 62311:2007
|
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)
|
IEC 61000-3-3:2013 RLV
|
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
|
IEC 61000-3-3 : 3.0EN+(REDLINE+VERSION)
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION
|
CISPR 11:2015 RLV
|
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
|
UL 2231-2:2ED 2012-09
|
Personnel Protection Systems for Electric Vehicle (EV) Supply Circuits: Particular Requirements for Protection Devices for Use in Charging Systems
|
IEC 61786-2:2014
|
Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 2: Basic standard for measurements
|
UL 2231-1:2ED 2012-09
|
Personnel Protection Systems for Electric Vehicle (EV) Supply Circuits; Part 1: General Requirements
|
IEC 61000-6-2 : 3.0:2016
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
|
IEC 61000-4-34:2005+AMD1:2009 CSV
|
Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
|
ISO 4130:1978
|
Road vehicles — Three-dimensional reference system and fiducial marks — Definitions
|
EN 60204-1 : 2006 COR 2010
|
SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
|
IEC 61000-3-2 : 4.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)
|
EN 62369-1:2009
|
Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz - Part 1: Fields produced by devices used for electronic article surveillance, radio frequency identification and similar systems
|