SAE J 300 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Engine Oil Viscosity Classification
Hardcopy , PDF
06-28-2021
English
01-20-2015
1. SCOPE
2. REFERENCES
3. SIGNIFICANCE AND USE
4. LOW-TEMPERATURE TEST METHODS
5. HIGH-TEMPERATURE TEST METHODS
6. LABELING
7. NOTES
APPENDIX A
This SAE Standard defines the limits for a classification of engine lubricating oils in rheological terms only.
Committee |
TC 1
|
DocumentType |
Revision
|
Pages |
9
|
PublisherName |
SAE International
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
MIL-L-46152 Revision E:1990 | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, ADMINISTRATIVE SERVICE, METRIC |
ISO 5165:2017 | Petroleum products Determination of the ignition quality of diesel fuels Cetane engine method |
ASTM D 2422 : 1997 : R2013 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
ISO 4548-14:2016 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 14: Cold start simulation and hydraulic pulse durability for composite filter housings |
NACE MR 01 74 : 2007 | SELECTING INHIBITORS FOR USE AS SUCKER-ROD THREAD LUBRICANTS |
MIL-HDBK-113 Revision C:1989 | GUIDE FOR THE SELECTION OF LUBRICANTS, FUNCTIONAL FLUIDS, PRESERVATIVES AND SPECIALITY PRODUCTS FOR USE IN GROUND EQUIPMENT SYSTEMS |
MIL-PRF-32584 Base Document:2017 | Deck Covering Materials, Monolithic |
MIL L 21260 : D | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATIVE AND BREAK IN |
ISO 4548-7:2012 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 7: Vibration fatigue test |
BS 7403-1:1998 | Full-flow lubricating oil filters for internal combustion engines Methods of test for differential pressure/flow characteristics |
MIL PRF 002104 : L | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, COMBAT/TACTICAL SERVICE |
ASTM D 2422 : 1997 : R2007 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
API 1509 : 2002 | ENGINE OIL LICENSING AND CERTIFICATION SYSTEM |
ASTM D 2422 : 1997 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
ASTM D 7320 : 2017-05 | TEST METHOD FOR EVALUATION OF AUTOMOTIVE ENGINE OILS IN THE SEQUENCE 3G, SPARK-IGNITION ENGINE |
MIL-PRF-71229 Revision D:2011 | MOUNT, GUN, 120 MM |
BS ISO 4548-15:2014 | Methods of test for full-flow lubricating oil filters for internal combustion engines Vibration fatigue test for composite filter housings |
BS 7403-4:1998 | Full-flow lubricating oil filters for internal combustion engines Methods of test for initial particle retention efficiency, life and cumulative efficiency (gravimetric method) |
A-A-52306 Revision A:1995 | LUBRICATING OIL, HEAVY-DUTY DIESEL ENGINE |
07/30149374 DC : 0 | BS EN 15673-1 - DETERMINATION OF SLIP RESISTANCE OF PEDESTRIAN SURFACES - METHOD OF EVALUATION - PART 1: REFERENCE METHOD |
14/30279043 DC : 0 | BS ISO 4548-14 - METHODS OF TEST FOR FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES - PART 14: COLD START SIMULATION AND HYDRAULIC PULSE DURABILITY FOR COMPOSITE FILTER HOUSINGS |
BS 7403-2:1998 | Full-flow lubricating oil filters for internal combustion engines Method of test for element by-pass valve characteristics |
BS ISO 4548-7:2012 | Methods of test for full-flow lubricating oil filters for internal combustion engines Vibration fatigue test |
12/30241609 DC : 0 | BS ISO 4548-15 - METHODS OF TEST FOR FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES - PART 15: VIBRATION FATIGUE TEST WITH COMPOSITE MATERIALS |
S.R. CEN/TS 16165:2016 | DETERMINATION OF SLIP RESISTANCE OF PEDESTRIAN SURFACES - METHODS OF EVALUATION |
12/30171803 DC : 0 | BS ISO 4548-5 - FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES - PART 5: METHOD OF TEST FOR COLD START SIMULATION AND HYDRAULIC PULSE DURABILITY |
SAE AMS 2631 : 2017 | ULTRASONIC INSPECTION, TITANIUM AND TITANIUM ALLOY BAR, BILLET AND PLATE |
ASTM D 8111 : 2017 | Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine |
SAE J 2359 : 1998 | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, MILITARY COMBAT/TACTICAL SERVICE |
SAE J 1423 : 2015 | CLASSIFICATION OF ENERGY CONSERVING ENGINE OIL AND RESOURCE CONSERVING ENGINE OIL FOR PASSENGER CARS, VANS, SPORT UTILITY VEHICLES, AND LIGHT-DUTY TRUCKS |
SAE J 183 : 2017 | ENGINE OIL PERFORMANCE AND ENGINE SERVICE CLASSIFICATION (OTHER THAN 'ENERGY CONSERVING') |
11/30218514 DC : 0 | BS ISO 4548-7 - METHODS OF TEST FOR FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES - PART 7: VIBRATION FATIGUE TEST |
MIL-L-6082 Revision E:1990 | LUBRICATING OIL, AIRCRAFT PISTON ENGINE (NONDISPERSANT MINERAL OIL) |
MIL-PRF-32049 Base Document:1999 | PALLET, FIELD ARTILLERY PROJECTILE |
MIL-PRF-21260 Revision E:1998 | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATIVE BREAK-IN |
BS 7403-5:1991 | Full-flow lubricating oil filters for internal combustion engines Method of test for cold start simulation and hydraulic pulse durability |
BS 7403-3:1998 | Full-flow lubricating oil filters for internal combustion engines Methods of test for resistance to high differential pressure and to elevated temperature |
MIL-PRF-2104 Revision K:2016 | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, COMBAT/TACTICAL SERVICE |
EN ISO 5165:2018 | Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method (ISO 5165:2017) |
SAE J 2361 : 1998 | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATION BREAK-IN |
I.S. EN ISO 5165:1998 | PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD (ISO 5165:2017) |
SAE AMS 2633 : 2017 | ULTRASONIC INSPECTION, CENTRIFUGALLY-CAST, CORROSION-RESISTANT STEEL TUBULAR CYLINDERS |
ISO 18436-5:2012 | Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 5: Lubricant laboratory technician/analyst |
ISO 4548-5:2013 | Methods of test for full-flow lubricating oil filters for internal combustion engines Part 5: Test for cold start simulation and hydraulic pulse durability |
BS ISO 18436-5:2012 | Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel Lubricant laboratory technician/analyst |
BS 7403-7:1991 | Full-flow lubricating oil filters for internal combustion engines Method of test for vibration fatigue |
MIL-L-22851 Revision D:1990 | LUBRICATING OIL, AIRCRAFT PISTON ENGINE, (ASHLESS DISPERSANT) |
DIN 51130:2014-02 | Testing of floor coverings - Determination of the anti-slip property - Workrooms and fields of activities with slip danger - Walking method - Ramp test |
ASTM D 7932 : 2017 | Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments |
BS ISO 4548-14:2016 | Methods of test for full-flow lubricating oil filters for internal combustion engines Cold start simulation and hydraulic pulse durability for composite filter housings |
BS ISO 4548-5:2013 | Methods of test for full-flow lubricating oil filters for internal combustion engines Test for cold start simulation and hydraulic pulse durability |
API 1525A : 1ED 2012 | BULK ENGINE OIL CHAIN OF CUSTODY AND QUALITY DOCUMENTATION |
SAE AMS 2632 : 2008 | INSPECTION, ULTRASONIC, OF THIN MATERIALS 0.5 INCH (12.77 MM) AND UNDER IN CROSS-SECTIONAL THICKNESS |
MIL L 2104 : F | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, COMBAT TACTICAL SERVICE |
STANAG 2410 : 1989 | LIST OF NATO CIVIL/MILITARY GROUND ENGINE LUBRICATING OIL INTERCHANGEABILITY |
SAE J 2438 : 1998 | LOW-TEMPERATURE CRANKING LOAD REQUIREMENTS OF AN ENGINE - AIR STARTER METHOD |
ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
UNI ISO 18436-5 : 2013 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 5: LUBRICANT LABORATORY TECHNICIAN/ANALYST |
SAE J 357 : 2016 | PHYSICAL AND CHEMICAL PROPERTIES OF ENGINE OILS |
ISO 4548-15:2014 | Methods of test for full-flow lubricating oil filters for internal combustion engines Part 15: Vibration fatigue test for composite filter housings |
ASTM D 6984 : 2017-05 | TEST METHOD FOR EVALUATION OF AUTOMOTIVE ENGINE OILS IN THE SEQUENCE IIIF, SPARK-IGNITION ENGINE |
ASTM D 2422 : 1997 : R2002 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
ASTM D 6224 : 2016 : REDLINE | Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment |
CEN/TS 16165:2016 | Determination of slip resistance of pedestrian surfaces - Methods of evaluation |
SAE J 1510 : 2001 | LUBRICANTS FOR TWO-STROKE-CYCLE GASOLINE ENGINES |
ASTM D 3244 : 2016-06 | PRACTICE FOR UTILIZATION OF TEST DATA TO DETERMINE CONFORMANCE WITH SPECIFICATIONS |
ASTM D 5133 : 2015 : REDLINE | Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique |
ASTM D 5481 : 2013 : REDLINE | Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer |
ASTM D 4683 : 2017 : REDLINE | Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C |
SAE J 1536 : 2006 | TWO-STROKE-CYCLE ENGINE OIL FLUIDITY/MISCIBILITY CLASSIFICATION |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.