SAE J 846 : 2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
CODING SYSTEMS FOR IDENTIFICATION OF FLUID CONDUCTORS AND CONNECTORS
Available format(s)
Hardcopy , PDF
Superseded date
09-04-2020
Language(s)
English
Published date
01-01-2015
Publisher
FOREWORD
1. SCOPE
2. REFERENCES
3. GENERAL SPECIFICATIONS
4. APPLICATION OF CODE
5. NOTES
APPENDIX A - SPECIAL USER REQUIREMENTS
APPENDIX B - CODES REMOVED FROM TABLES 6A AND 6B
Gives a convenient means of identifying the various tube, pipe, hydraulic hose type and hose fittings, not intended for use in aircraft and of transmitting technical or engineering information relating to them wherever drawings or other pictorial media may not be readily available.
| DocumentType |
Revision
|
| Pages |
29
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| MIL-DTL-52525-35 Revision B:2008 | FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 45 DEGREES BENT TUBE |
| MIL-DTL-52525-10 Revision D:2011 | FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, STRAIGHT |
| SAE J 518 : 2013 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, FOUR-BOLT SPLIT FLANGE TYPE |
| MIL-DTL-52525-7 Revision D:2011 | FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, SHORT DROP |
| MIL-DTL-52525-32 Revision A:2008 | FITTINGS, HOSE, REINFORCED HYDRAULIC HOSE AND CLAMP-HALVES: FIELD ATTACHABLE (REUSABLE), SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE, FOR USE WITH TYPE 100RE FOUR-SPIRAL-WRAP REINFORCEMENT HOSE |
| MIL-DTL-52525-44 Base Document:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 45 DEGREES BENT TUBE |
| MIL-DTL-52525-1 Revision D:2011 | FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT, SAE-J516 TYPE, FOR ASSEMBLY WITH SAE-J517, TYPE 100R2 HOSE |
| MIL-DTL-52525-43 Base Document:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, STRAIGHT |
| MIL-DTL-52525-11 Revision C:2008 | FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 45 DEGREES BENT TUBE |
| MIL-DTL-52525-40 Revision B:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, STRAIGHT |
| MIL-DTL-52525-6 Revision C:2008 | FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE |
| MIL-DTL-52525-36 Revision B:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 90 DEGREES BENT TUBE |
| MIL-DTL-52525-15 Revision C:2008 | FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 90 DEGREES BENT TUBE |
| SAE J 518/2 : 2017 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 2: 42 MPA (CODE 62) |
| SAE J 2593 : 2015 | INFORMATION REPORT FOR THE INSTALLATION OF FLUID CONDUCTORS AND CONNECTORS |
| SAE J518/1:2023 | Hydraulic Flange Tube, Pipe, and Hose Connections Four-Screw Flange Connection - Part 1: 3.5 to 35 MPa (Code 61) |
| SAE J 1453/1 : 2012 | SPECIFICATION FOR O-RING FACE SEAL CONNECTORS - PART 1: TUBE CONNECTION DETAILS AND COMMON REQUIREMENTS FOR PERFORMANCE AND TESTS |
| SAE J 1453/2 : 2015 | Specification for O-Ring Face Seal Connectors: Part 2 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Braze-on Tube Ends, Caps, and Connectors with ISO 6149-2 Metric Stud Ends and ISO 6162 4-Bolt Flange Heads |
| SAE J 1754/2 : 2015 | HOSE ASSEMBLIES, RUBBER, HYDRAULIC, STEEL WIRE REINFORCED - PART 2: ORDERING INFORMATION |
| MIL-DTL-52525-13 Revision C:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE STRAIGHT |
| SAE J 1754/1 : 2017 | HOSE ASSEMBLIES, RUBBER, HYDRAULIC, STEEL WIRE REINFORCED - PART 1: PROCUREMENT DOCUMENT |
| SAE J 532 : 2013 | AUTOMOTIVE STRAIGHT THREAD FILLER AND DRAIN PLUGS |
| SAE J 1231 : 2016 | FORMED TUBE ENDS FOR HOSE CONNECTIONS AND HOSE FITTINGS |
| SAE J 1754/3 : 2015 | HOSE ASSEMBLIES, HYDRAULIC, J517 100R SERIES HOSE - PART 3: PROCUREMENT AND ORDERING INFORMATION |
| SAE J 518/3 : 2015 | HYDRAULIC FLANGE CLAMPS, 2-SCREW FLANGE CONNECTION TO BE USED WITH SAE J518-1, (CODE 61) CONNECTIONS WHERE ONLY LOW PRESSURE IS REQUIRED |
| MIL-DTL-52525-5 Revision D:2011 | FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT |
| MIL-DTL-52525-34 Revision B:2008 | FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, STRAIGHT |
| MIL-DTL-52525-2 Revision C:2008 | FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE |
| MIL-DTL-52525-38 Revision B:2008 | FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE |
| MIL-DTL-52525-3 Revision D:2011 | FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, SHORT DROP |
| MIL-DTL-52525-9 Revision C:2008 | FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT |
| SAE J 530 : 2018 | AUTOMOTIVE PIPE FITTINGS |
| SAE J 531 : 2015 | AUTOMOTIVE PIPE, FILLER, AND DRAIN PLUGS |
| SAE J 517 : 2017 | HYDRAULIC HOSE |
| SAE J 2552 : 2014 | PUSH-ON HOSE AND MATING HOSE FITTINGS |
| MIL-DTL-52525-31 Revision B:2008 | FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL |
| SAE J 518/1 : 2013 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 1: 3.5 MPA TO 35 MPA (CODE 61) |
| MIL-DTL-52525-16 Revision D:2008 | FITTINGS, CLAMP-HALVES, FOR 4-BOLT SPLIT-FLANGE, SAE-J518, TYPE SPLIT-FLANGE CLAMP (SFC) |
| MIL-DTL-52525-37 Revision B:2008 | FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT |
| SAE J 2494 : 2011 | PUSH-TO-CONNECT TUBE FITTINGS FOR USE IN THE PIPING OF VEHICULAR AIR BRAKE |
| SAE J512 : 1997(R2017) | AUTOMOTIVE TUBE FITTINGS |
| SAE J 513 : 1999 | REFRIGERATION TUBE FITTINGS - GENERAL SPECIFICATIONS |
| SAE J 2494-1 : 2017 | DIMENSIONAL SPECIFICATIONS FOR METALLIC BODY PUSH-TO-CONNECT FITTINGS USED ON A VEHICULAR AIR BRAKE SYSTEM |
| SAE J 516 : 2016 | HYDRAULIC HOSE FITTINGS |
| MIL-DTL-52525-45 Base Document:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 90 DEGREES BENT TUBE |
| MIL-DTL-52525-8 Revision C:2008 | FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, LONG DROP |
| MIL-DTL-52525-39 Revision B:2008 | FITTINGS, HOSE, SCREW-ON TO 37DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE |
| MIL-DTL-52525-14 Revision C:2008 | FITTINGS, HOSE CRIMP TYPE, SPLIT-FLANGE 45 DEGREES BENT |
| MIL-DTL-52525-41 Revision A:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 45 DEGREES BENT TUBE |
| MIL-DTL-52525-42 Revision B:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE 90 DEGREES BENT |
| MIL-DTL-52525-12 Revision D:2011 | FITTINGS, HOSE, SCREW ON TO SPLIT-FLANGE 90 DEGREES BENT |
| MIL-DTL-52525-33 Revision A:2008 | FITTINGS, WIRE REINFORCED HYDRAULIC HOSE AND CLAMP-HALVES: FIELD ATTACHABLE (REUSABLE), SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, FOR USE WITH TYPE 100RE FOUR-SPRIAL-WRAP REINFORCEMENT HOSE |
| SAE J 1453/3 : 2012 | SPECIFICATION FOR O-RING FACE SEAL CONNECTORS: PART 3 - REQUIREMENTS, DIMENSIONS, AND TESTS FOR STEEL UNIONS, BULKHEADS, SWIVELS, BRAZE SLEEVES, CAPS, AND CONNECTORS WITH SAE J1926-2 INCH STUD ENDS |
| MIL-DTL-52525-4 Revision D:2011 | FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, LONG DROP |
| SAE J 246 : 2017 | SPHERICAL AND FLANGED SLEEVE (COMPRESSION) TUBE FITTINGS |
| SAE J 2494-1 : 2011 | DIMENSIONAL SPECIFICATIONS FOR METALLIC BODY PUSH-TO-CONNECT FITTINGS USED ON A VEHICULAR AIR BRAKE SYSTEM |
| ISO 11926-2:1995 | Connections for general use and fluid power Ports and stud ends with ISO 725 threads and O-ring sealing Part 2: Heavy-duty (S series) stud ends |
| SAE J 517 : 2016 | HYDRAULIC HOSE |
| SAE J 530 : 1995 | AUTOMOTIVE PIPE FITTINGS |
| ISO 8434-1:2007 | Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors |
| SAE J 1926/4 : 2010 | Connector for Fluid Power and General Use—Ports and Stud End with ASME B1.1 Threads and O-Ring Seal—Part 4: External Hex and Internal Hex Inch Port Plugs—Dimensions, Design, Test Methods and Requirements |
| SAE J 1926/3 : 2016 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 3: LIGHT-DUTY (L-SERIES) STUD ENDS |
| SAE J 516 : 2016 | HYDRAULIC HOSE FITTINGS |
| ISO 12151-2:2003 | Connections for hydraulic fluid power and general use — Hose fittings — Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings |
| SAE J 2552 : 2014 | PUSH-ON HOSE AND MATING HOSE FITTINGS |
| SAE J 1453/2 : 2015 | Specification for O-Ring Face Seal Connectors: Part 2 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Braze-on Tube Ends, Caps, and Connectors with ISO 6149-2 Metric Stud Ends and ISO 6162 4-Bolt Flange Heads |
| SAE J 513 : 1999 | REFRIGERATION TUBE FITTINGS - GENERAL SPECIFICATIONS |
| SAE J 1231 : 2016 | FORMED TUBE ENDS FOR HOSE CONNECTIONS AND HOSE FITTINGS |
| SAE J 531 : 2015 | AUTOMOTIVE PIPE, FILLER, AND DRAIN PLUGS |
| SAE J 1926/1 : 2016 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 1: THREADED PORT WITH O-RING SEAL IN TRUNCATED HOUSING |
| ISO 6162-2:2012 | Hydraulic fluid power Flange connections with split or one-piece flange clamps and metric or inch screws Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 |
| SAE J 532 : 2013 | AUTOMOTIVE STRAIGHT THREAD FILLER AND DRAIN PLUGS |
| SAE J 518/3 : 2015 | HYDRAULIC FLANGE CLAMPS, 2-SCREW FLANGE CONNECTION TO BE USED WITH SAE J518-1, (CODE 61) CONNECTIONS WHERE ONLY LOW PRESSURE IS REQUIRED |
| ISO 12151-5:2007 | Connections for hydraulic fluid power and general use — Hose fittings — Part 5: Hose fittings with ISO 8434-2 37 degree flared ends |
| ISO 8434-2:2007 | Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors |
| SAE J 1453/3 : 2012 | SPECIFICATION FOR O-RING FACE SEAL CONNECTORS: PART 3 - REQUIREMENTS, DIMENSIONS, AND TESTS FOR STEEL UNIONS, BULKHEADS, SWIVELS, BRAZE SLEEVES, CAPS, AND CONNECTORS WITH SAE J1926-2 INCH STUD ENDS |
| SAE AMS C 81562 : 1998 | COATINGS, CADMIUM, TIN-CADMIUM AND ZINC (MECHANICALLY DEPOSITED) |
| SAE J 534 : 2015 | LUBRICATION FITTINGS |
| ISO 6149-3:2006 | Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends |
| SAE J 246 : 2012 | SPHERICAL AND FLANGED SLEEVE (COMPRESSION) TUBE FITTINGS |
| SAE J 515 : 2015 | SPECIFICATION FOR O-RING MATERIALS USED WITH HYDRAULIC CONNECTORS |
| SAE J 1453/1 : 2012 | SPECIFICATION FOR O-RING FACE SEAL CONNECTORS - PART 1: TUBE CONNECTION DETAILS AND COMMON REQUIREMENTS FOR PERFORMANCE AND TESTS |
| ISO 12151-3:2010 | Connections for hydraulic fluid power and general use Hose fittings Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends |
| SAE J 2494-2 : 2002 | DIMENSIONAL SPECIFICATIONS FOR NON-METALLIC BODY PUSH-TO-CONNECT FITTINGS USED ON A VEHICULAR AIR BRAKE SYSTEM |
| ISO 8434-3:2005 | Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors |
| ISO 6162-1:2012 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| ISO 6149-2:2006 | Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends |
| SAE J 518/1 : 2013 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 1: 3.5 MPA TO 35 MPA (CODE 61) |
| SAE J 514 : 2012 | HYDRAULIC TUBE FITTINGS |
| ISO 6149-1:2006 | Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1: Ports with truncated housing for O-ring seal |
| ISO 12151-1:2010 | Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends |
| ISO 11926-3:1995 | Connections for general use and fluid power Ports and stud ends with ISO 725 threads and O-ring sealing Part 3: Light-duty (L series) stud ends |
| ISO 12151-6:2009 | Connections for hydraulic fluid power and general use Hose fittings Part 6: Hose fittings with ISO 8434-6 60 degree cone ends |
| ISO 12151-4:2007 | Connections for hydraulic fluid power and general use Hose fittings Part 4: Hose fittings with ISO 6149 metric stud ends |
| SAE J 1926/2 : 2016 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 2: HEAVY-DUTY (S SERIES) STUD ENDS |
| SAE J512 : 1997 | AUTOMOTIVE TUBE FITTINGS |
| ISO 11926-1:1995 | Connections for general use and fluid power Ports and stud ends with ISO 725 threads and O-ring sealing Part 1: Ports with O-ring seal in truncated housing |
US$152.22
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.