TAPPI T 1200 : 2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
INTERLABORATORY EVALUATION OF TEST METHODS TO DETERMINE TAPPI REPEATABILITY AND REPRODUCIBILITY
Available format(s)
Hardcopy , PDF
Superseded date
01-20-2020
Language(s)
English
Published date
01-01-2014
1. Scope
2. Summary of practice
3. Significance
4. Definitions
5. Planning the intra- or interlaboratory study
6. Conducting an intra- or interlaboratory study
7. Calculating repeatability from an intralaboratory
study (for Provisional Methods)
8. Calculating repeatability and reproducibility from
an interlaboratory study (for Official Methods)
9. Consistency evaluation
10. Statement of the precision of the test method
11. Keywords
12. Additional information
Appendix A.1: Example of intralaboratory trial and
repeatability calculations
Appendix A.2: Example of interlaboratory trial and
repeatability and reproducibility
calculations
Appendix A.3: Applications of repeatability and
reproducibility
Defines techniques for conducting and analyzing the results of intralaboratory and interlaboratory studies.
| DevelopmentNote |
Supersedes TAPPI 1206 (01/2001)
|
| DocumentType |
Standard Practice
|
| Pages |
16
|
| PublisherName |
Technical Association of the Pulp & Paper Industry
|
| Status |
Superseded
|
| SupersededBy |
| DIN EN ISO 12625-16 E : 2015 | TISSUE PAPER AND TISSUE PRODUCTS - PART 16: DETERMINATION OF OPTICAL PROPERTIES - OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE METHOD (ISO 12625-16:2015) |
| BS EN ISO 12625-15:2015 | Tissue paper and tissue products Determination of optical properties. Measurement of brightness and colour with C/2° (indoor daylight) illuminant |
| DIN ISO 16260:2016-10 (Draft) | PAPER AND BOARD - DETERMINATION OF INTERNAL BOND STRENGTH (ISO 16260:2016) |
| BS ISO 20494:2017 | Paper. Requirements for stability for general graphic applications |
| TAPPI UM 258 : 2010 | LABORATORY PROCESSING OF PULP (KOLLERGANG METHOD) |
| TAPPI T 531 : 2001 | STARCH CONSUMPTION IN CORRUGATED BOARD (ENZYMATIC/GRAVIMETRIC METHOD) |
| TAPPI T 271 : 2012(R 2018) | FIBER LENGTH OF PULP AND PAPER BY AUTOMATED OPTICAL ANALYZER USING POLARIZED LIGHT |
| BS ISO 16532-3:2010 | Paper and board. Determination of grease resistance Turpentine test for voids in glassine and greaseproof papers |
| ISO 5629:2017 | Paper and board — Determination of bending stiffness — Resonance method |
| BS ISO 3781:2011 | Paper and board. Determination of tensile strength after immersion in water |
| TAPPI T 569 : 2014 | INTERNAL BOND STRENGTH (SCOTT TYPE) |
| TAPPI T 240 : 2012 | CONSISTENCY (CONCENTRATION) OF PULP SUSPENSIONS |
| TAPPI T 406 : 2013 | REDUCIBLE SULFUR IN PAPER AND PAPERBOARD |
| BS ISO 16260:2016 | Paper and board. Determination of internal bond strength |
| 16/30325457 DC : 0 | BS ISO 8791-3 - PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 3: SHEFFIELD METHOD |
| DIN ISO 3039:2011-06 | Corrugated fibreboard - Determination of grammage of the component papers after separation (ISO 3039:2010) |
| 12/30242237 DC : 0 | BS ISO 8791-2 - PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 2: BENDTSEN METHOD |
| BS ISO 16945:2014 | Corrugating medium. Determination of the edge crush resistance after laboratory fluting |
| TAPPI T 578 : 2011 | ACCELERATED LIGHT AGING OF PRINTING AND WRITING PAPER BY XENON-ARC EXPOSURE APPARATUS |
| TAPPI T 200 : 2010 | LABORATORY BEATING OF PULP (VALLEY BEATER METHOD) |
| UNI ISO 5636-5 : 2014 | PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 5: GURLEY METHOD |
| TAPPI T 252 : 2002 : R2012 | PH AND ELECTRICAL CONDUCTIVITY OF HOT WATER EXTRACTS OF PULP, PAPER, AND PAPERBOARD |
| TAPPI T 558 : 2015 | SURFACE WETTABILITY AND ABSORBENCY OF SHEETED MATERIALS USING AN AUTOMATED CONTACT ANGLE TESTER |
| ISO 5636-3:2013 | Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method |
| I.S. EN ISO 1974:2012 | PAPER - DETERMINATION OF TEARING RESISTANCE - ELMENDORF METHOD (ISO 1974:2012) |
| I.S. EN ISO 3035:2011 | CORRUGATED FIBREBOARD - DETERMINATION OF FLAT CRUSH RESISTANCE (ISO 3035:2011) |
| TAPPI T 244 : 2011 | ACID-INSOLUBLE ASH IN WOOD, PULP, PAPER, AND PAPERBOARD |
| ISO 5636-5:2013 | Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method |
| TAPPI T 702 : 2014 | RHEOLOGICAL MEASUREMENTS FOR CHARACTERIZATION OF POLYOLEFINS: LOW-DENSITY POLYETHYLENE (LDPE) FOR EXTRUSION COATING |
| UNE-EN ISO 12625-16:2015 | Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015) |
| TAPPI T 476 : 2011 | ABRASION LOSS OF PAPER AND PAPERBOARD (TABER-TYPE METHOD) |
| TAPPI T 613 : 2010 | ANALYSIS OF CAUSTIC SODA |
| ISO 3039:2010 | Corrugated fibreboard Determination of grammage of the component papers after separation |
| ISO 3037:2013 | Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method) |
| ISO 12625-7:2014 | Tissue paper and tissue products Part 7: Determination of optical properties Measurement of brightness and colour with D65/10 (outdoor daylight) |
| EN ISO 12625-7:2014 | Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2014) |
| ISO 2759:2014 | Board — Determination of bursting strength |
| UNE-EN ISO 12625-7:2015 | Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2014) |
| BS EN ISO 12625-4:2016 | Tissue paper and tissue products Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption |
| BS EN ISO 2759:2014 | Board. Determination of bursting strength |
| EN ISO 12625-5:2016 | Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2016) |
| EN ISO 12625-6:2016 | Tissue paper and tissue products - Part 6: Determination of grammage (ISO 12625-6:2016) |
| DIN EN ISO 534:2012-02 | Paper and board - Determination of thickness, density and specific volume (ISO 534:2011) |
| EN ISO 12625-4:2016 | Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016) |
| TAPPI T 494 : 2013 | TENSILE PROPERTIES OF PAPER AND PAPERBOARD (USING CONSTANT RATE OF ELONGATION APPARATUS) |
| TAPPI T 428 : 2013 | HOT WATER EXTRACTABLE ACIDITY OR ALKALINITY OF PAPER |
| TAPPI UM 23 : 2010 | BULK DENSITY OF WOOD CHIPS |
| DIN ISO 3034 E : 2016 | CORRUGATED FIBREBOARD - DETERMINATION OF SINGLE SHEET THICKNESS (ISO 3034:2011) |
| TAPPI T 1014 : 2006 : R2010 | MOISTURE SENSITIVITY OF FIBER GLASS MATS |
| BS ISO 8791-3:2017 | Paper and board. Determination of roughness/smoothness (air leak methods) Sheffield method |
| TAPPI T 223 : 2010 | PENTOSANS IN WOOD AND PULP |
| 15/30274545 DC : 0 | BS ISO 18522 - PAPER AND BOARD - AUTOMATED OFF-LINE TESTING OF PHYSICAL PROPERTIES FOR CD (CROSS DIRECTION) PROFILES |
| 12/30196194 DC : 0 | BS ISO 5636-5 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE AND AIR RESISTANCE (MEDIUM RANGE) - PART 5: GURLEY METHOD |
| ISO 16945:2014 | Corrugating medium Determination of the edge crush resistance after laboratory fluting |
| 15/30323953 DC : 0 | BS EN ISO 12625-5 - TISSUE PAPER AND TISSUE PRODUCTS - PART 5: DETERMINATION OF WET TENSILE STRENGTH |
| 15/30323949 DC : 0 | BS EN ISO 12625-4 - TISSUE PAPER AND TISSUE PRODUCTS - PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT MAXIMUM FORCE AND TENSILE ENERGY ABSORPTION |
| DIN EN ISO 3035:2012-02 | Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011) |
| BS EN ISO 1974:2012 | Paper. Determination of tearing resistance. Elmendorf method |
| BS EN ISO 12625-16:2015 | Tissue paper and tissue products Determination of optical properties. Opacity (paper backing). Diffuse reflectance method |
| DIN ISO 16260 E : 2017 | PAPER AND BOARD - DETERMINATION OF INTERNAL BOND STRENGTH (ISO 16260:2016) |
| I.S. EN ISO 535:2014 | PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD (ISO 535:2014) |
| UNE-ISO 12192:2017 | Paper and board. Determination of compressive strength. Ring crush method |
| DIN EN ISO 12625-15:2015-05 | TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 (INDOOR DAYLIGHT) ILLUMINANT (ISO 12625-15:2015) |
| BS ISO 12192:2011 | Paper and board. Determination of compressive strength. Ring crush method |
| BS ISO 5636-4:2013 | Paper and board. Determination of air permeance (medium range) Sheffield method |
| DIN EN ISO 535:2014-06 | Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:2014) |
| TAPPI T 575 : 2013 | ROUGHNESS OF PAPER AND PAPERBOARD, STYLUS (EMVECO-TYPE) METHOD |
| TAPPI T 408 : 2007 | ROSIN IN PAPER AND PAPERBOARD |
| BS ISO 5636-3:2013 | Paper and board. Determination of air permeance (medium range) Bendtsen method |
| TAPPI T 523 : 2006 | DYNAMIC MEASUREMENT OF WATER VAPOR TRANSFER THROUGH SHEET MATERIALS |
| 09/30181245 DC : 0 | BS ISO 3039 - CORRUGATED FIBREBOARD - DETERMINATION OF GRAMMAGE OF THE COMPONENT PAPERS AFTER SEPARATION |
| TAPPI T 255 : 2007 | WATER-SOLUBLE SULFATES IN PULP AND PAPER |
| TAPPI T 200 : 2010 : R2015 | LABORATORY BEATING OF PULP (VALLEY BEATER METHOD) |
| ISO 16532-3:2010 | Paper and board — Determination of grease resistance — Part 3: Turpentine test for voids in glassine and greaseproof papers |
| UNE-ISO 5636-3:2015 | Paper and board. Determination of air permeance (medium range). Part 3: Bendtsen method |
| TAPPI T 572 : 2013 | ACCELERATED POLLUTANT AGING OF PRINTING AND WRITING PAPER BY POLLUTION CHAMBER EXPOSURE APPARATUS |
| ISO 2493-1:2010 | Paper and board Determination of bending resistance Part 1: Constant rate of deflection |
| ISO/TR 24498:2006 | Paper, board and pulps Estimation of uncertainty for test methods |
| TAPPI T 504 : 2007 | GLUE IN PAPER (QUALITATIVE AND QUANTITATIVE DETERMINATION) |
| TAPPI T 282 : 2013 : R 2019 | HEXENEURONIC ACID CONTENT OF CHEMICAL PULP |
| TAPPI T 532 : 2001 | STARCH CONSUMPTION IN CORRUGATED BOARD (ENZYMATIC/COLORIMETRIC METHOD) |
| ISO 12625-3:2014 | Tissue paper and tissue products — Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk |
| DIN EN ISO 534 E : 2012 | PAPER AND BOARD - DETERMINATION OF THICKNESS, DENSITY AND SPECIFIC VOLUME (ISO 534:2011) |
| UNE-EN ISO 3037:2013 | Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013) |
| UNE-EN ISO 536:2013 | Paper and board - Determination of grammage (ISO 536:2012) |
| BS EN ISO 12625-5:2016 | Tissue paper and tissue products Determination of wet tensile strength |
| BS EN ISO 2758:2014 | Paper. Determination of bursting strength |
| I.S. EN ISO 12625-3:2014 | TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY AND BULK (ISO 12625-3:2014) |
| I.S. EN ISO 12625-7:2014 | TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH D65/10 DEGREE (OUTDOOR DAYLIGHT) (ISO 12625-7:2014) |
| I.S. EN ISO 12625-5:2016 | TISSUE PAPER AND TISSUE PRODUCTS - PART 5: DETERMINATION OF WET TENSILE STRENGTH (ISO 12625-5:2016) |
| TAPPI T 431 : 2010 | INK ABSORBENCY OF BLOTTING PAPER |
| I.S. EN ISO 3037:2013 | CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) (ISO 3037:2013) |
| I.S. EN ISO 12625-6:2016 | TISSUE PAPER AND TISSUE PRODUCTS - PART 6: DETERMINATION OF GRAMMGE |
| I.S. EN ISO 2758:2014 | PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2014) |
| I.S. EN ISO 2759:2014 | BOARD - DETERMINATION OF BURSTING STRENGTH (ISO 2759:2014) |
| I.S. EN ISO 534:2011 | PAPER AND BOARD - DETERMINATION OF THICKNESS, DENSITY AND SPECIFIC VOLUME (ISO 534:2011) |
| I.S. EN ISO 12625-4:2016 | TISSUE PAPER AND TISSUE PRODUCTS - PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT BREAK AND TENSILE ENERGY ABSORPTION |
| BS ISO 5636-5:2013 | Paper and board. Determination of air permeance (medium range) Gurley method |
| BS ISO 2493-1:2010 | Paper and board. Determination of bending resistance Constant rate of deflection |
| DIN EN ISO 535 E : 2014 | PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD (ISO 535:2014) |
| DIN EN ISO 1974:2012-09 | Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012) |
| 13/30272957 DC : 0 | BS EN ISO 12625-3 - TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY |
| BS ISO 5636-6:2015 | Paper and board. Determination of air permeance (medium range) Oken method |
| TAPPI T 230 : 2013 | VISCOSITY OF PULP (CAPILLARY VISCOMETER METHOD) |
| UNE-ISO 5636-5:2015 | Paper and board. Determination of air permeance (medium range). Part 5: Gurley method |
| TAPPI T 227 : 2009 | FREENESS OF PULP (CANADIAN STANDARD METHOD) |
| 11/30216364 DC : 0 | BS EN ISO 1974 - PAPER - DETERMINATION OF TEARING RESISTANCE (ELMENDORF METHOD) |
| ISO 3034:2011 | Corrugated fibreboard — Determination of single sheet thickness |
| ISO 12192:2011 | Paper and board — Determination of compressive strength — Ring crush method |
| BS ISO 2493-2:2011 | Paper and board. Determination of bending resistance Taber-type tester |
| 12/30213199 DC : 0 | BS ISO 5636-3 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 3: BENDTSEN METHOD |
| TAPPI T 495 : 2013 | BENDING NUMBER OF PAPERBOARD |
| 09/30190545 DC : 0 | BS ISO 2493-1 - PAPER AND BOARD - DETERMINATION OF BENDING RESISTANCE - PART 1: CONSTANT RATE OF DEFLECTION |
| BS ISO 22891:2013 | Paper. Determination of transmittance by diffuse reflectance measurement |
| TAPPI T 458 : 2014 | SURFACE WETTABILITY OF PAPER (ANGLE OF CONTACT METHOD) |
| UNE-EN ISO 3035:2012 | Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011) |
| ISO 22891:2013 | Paper — Determination of transmittance by diffuse reflectance measurement |
| TAPPI T 556 : 2011 | BENDING RESISTANCE OF PAPER AND PAPERBOARD BY SINGLE-POINT BENDING METHOD |
| 10/30196197 DC : 0 | BS ISO 2493-2 - PAPER AND BOARD - DETERMINATION OF RESISTANCE TO BENDING - PART 2:TABER-TYPE TESTER |
| TAPPI T 222 : 2002 | ACID-INSOLUBLE LIGNIN IN WOOD AND PULP |
| ISO 20494:2017 | Paper — Requirements for stability for general graphic applications |
| TAPPI T 1009 : 2006 : R2010 | TENSILE STRENGTH AND ELONGATION AT BREAK FOR FIBER GLASS MATS |
| BS ISO 3039:2010 | Corrugated fibreboard. Determination of grammage of the component papers after separation |
| TAPPI T 646 : 2006 | BRIGHTNESS OF CLAY AND OTHER MINERAL PIGMENTS (45/0) |
| TAPPI T 1012 : 2006 : R2010 | MOISTURE CONTENT OF FIBER GLASS MATS |
| UNE-ISO 3039:2013 | Corrugated fibreboard. Determination of the grammage of the component papers after separation |
| TAPPI T 212 : 2012 | ONE PERCENT SODIUM HYDROXIDE SOLUBILITY OF WOOD AND PULP |
| PREN ISO 3037 : DRAFT 2013 | CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) (ISO/FDIS 3037:2013) |
| ISO 8791-2:2013 | Paper and board — Determination of roughness/smoothness (air leak methods) — Part 2: Bendtsen method |
| UNI EN ISO 1974 : 2012 | PAPER - DETERMINATION OF TEARING RESISTANCE - ELMENDORF METHOD |
| ISO 16260:2016 | Paper and board — Determination of internal bond strength |
| ISO 5636-4:2013 | Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method |
| TAPPI T 841 : 2003 | EDGEWISE COMPRESSIVE STRENGTH OF CORRUGATED FIBERBOARD USING THE MORRIS METHOD (SHORT COLUMN TEST) |
| UNI EN ISO 535 : 2014 | PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD |
| TAPPI T 571 : 2003 | DIFFUSE BRIGHTNESS OF PAPER AND PAPERBOARD (D/0) |
| ASTM D 1223 : 1993 : R2006 | Standard Test Method for Specular Gloss of Paper and Paperboard at 75° (Withdrawn 2010) |
| ASTM D 6125 : 1997 | Standard Test Method for Bending Resistance of Paper and Paperboard (Gurley Type Tester) |
| DIN EN ISO 536:2012-11 | PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012) |
| DIN EN ISO 536 E : 2012 | PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012) |
| TAPPI T 507 : 1999 | GREASE RESISTANCE OF FLEXIBLE PACKAGING MATERIALS |
| UNI EN ISO 12625-7 : 2014 | TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH D65/10 DEGREES (OUTDOOR DAYLIGHT) |
| UNI EN ISO 2758 : 2014 | PAPER - DETERMINATION OF BURSTING STRENGTH |
| UNI EN ISO 534 : 2012 | PAPER AND BOARD - DETERMINATION OF THICKNESS, DENSITY AND SPECIFIC VOLUME |
| UNI EN ISO 3037 : 2013 | CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) |
| UNI EN ISO 2759 : 2014 | BOARD - DETERMINATION OF BURSTING STRENGTH |
| UNI EN ISO 12625-3 : 2014 | TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY AND BULK |
| UNI ISO 5636-4 : 2014 | PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 4: SHEFFIELD METHOD |
| TAPPI T 650 : 2015 | SOLIDS CONTENT OF BLACK LIQUOR |
| TAPPI T 562 : 2010 | CIE WHITENESS AND TINT OF PAPER AND PAPERBOARD (45/0 GEOMETRY, C/2 ILLUMINANT/OBSERVER) |
| DIN ISO 3781:2012-07 | Paper and board - Determination of tensile strength after immersion in water (ISO 3781:2011) |
| TAPPI T 836 : 2013 | BENDING STIFFNESS, FOUR POINT METHOD |
| 13/30277424 DC : 0 | BS EN ISO 3037 - CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) |
| UNI ISO 5636-3 : 2014 | PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 3: BENDTSEN METHOD |
| DIN EN ISO 12625-16:2015-05 | Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015) |
| BS ISO 8791-2:2013 | Paper and board. Determination of roughness/smoothness (air leak methods) Bendtsen method |
| TAPPI T 1012 : 2006 | MOISTURE CONTENT OF FIBER GLASS MATS |
| 13/30283973 DC : 0 | BS EN ISO 12625-15 - TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 DEGREES (INDOOR DAYLIGHT) ILLUMINANT |
| TAPPI T 560 : 2005 : R2010 | CIE WHITENESS AND TINT OF PAPER AND PAPERBOARD (D/0 GEOMETRY, C/2 ILLUMINANT/OBSERVER) |
| BS EN ISO 535:2014 | Paper and board. Determination of water absorptiveness. Cobb method |
| TAPPI T 819 : 2007 | WATER ABSORPTION OF CORRUGATING MEDIUM: BOAT METHOD |
| TAPPI T 1014 : 2006 | MOISTURE SENSITIVITY OF FIBER GLASS MATS |
| 12/30196191 DC : 0 | BS ISO 5636-4 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 4: SHEFFIELD METHOD |
| DIN EN ISO 12625-15 E : 2015 | TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 DEGREES (INDOOR DAYLIGHT) ILLUMINANT (ISO 12625-15:2015) |
| ISO 8791-3:2017 | Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method |
| TAPPI T 1205 : 2014 | DEALING WITH SUSPECT (OUTLYING) TEST DETERMINATIONS |
| TAPPI T 546 : 2015 | MACHINE-DIRECTION GRAMMAGE VARIATION MEASUREMENT (GRAVIMETRIC METHOD) |
| UNE-ISO 2493-2:2014 | Paper and board. Determination of resistance to bending. Part 2: Taber-type tester |
| TAPPI T 560 : 2005 | CIE WHITENESS AND TINT OF PAPER AND PAPERBOARD (D/0 GEOMETRY, C/2 ILLUMINANT/OBSERVER) |
| TAPPI T 1009 : 2006 | TENSILE STRENGTH AND ELONGATION AT BREAK FOR FIBER GLASS MATS |
| UNE-ISO 16945:2015 | Corrugating medium. Determination of the edge crush resistance after laboratory fluting |
| TAPPI T 252 : 2002 | PH AND ELECTRICAL CONDUCTIVITY OF HOT WATER EXTRACTS OF PULP, PAPER, AND PAPERBOARD |
| BS ISO 5629:2017 | Paper and board. Determination of bending stiffness. Resonance method |
| TAPPI T 264 : 2007 | PREPARATION OF WOOD FOR CHEMICAL ANALYSIS |
| TAPPI T 545 : 2011 | CROSS-MACHINE GRAMMAGE PROFILE MEASUREMENT (GRAVIMETRIC METHOD) |
| ISO 3781:2011 | Paper and board — Determination of tensile strength after immersion in water |
| TAPPI T 1206 : SP 91 | PRECISION STATEMENT FOR TEST METHODS |
| ASTM D 1749 : 1993 : R2007 | Standard Practice for Interlaboratory Evaluation of Test Methods Used with Paper and Paper Products (Withdrawn 2010) |
| TAPPI T 454 : 2015 | TURPENTINE TEST FOR VOIDS IN GLASSINE AND GREASEPROOF PAPERS |
| ISO 2493-2:2011 | Paper and board Determination of bending resistance Part 2: Taber-type tester |
| ISO 5636-6:2015 | Paper and board Determination of air permeance (medium range) Part 6: Oken method |
| EN ISO 536:2012 | Paper and board - Determination of grammage (ISO 536:2012) |
| DIN EN ISO 3037:2013-12 | Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013) |
| DIN EN ISO 2759:2014-10 | Board - Determination of bursting strength (ISO 2759:2014) |
| DIN EN ISO 12625-3:2014-09 | Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness, apparent bulk density and bulk (ISO 12625-3:2014) |
| DIN EN ISO 2758:2014-12 | PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2014) |
| UNE-EN ISO 12625-4:2017 | Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016) |
| BS EN ISO 3037:2013 | Corrugated fibreboard. Determination of edgewise crush resistance (unwaxed edge method) |
| BS EN ISO 12625-3:2014 | Tissue paper and tissue products Determination of thickness, bulking thickness and apparent bulk density and bulk |
| BS EN ISO 536:2012 | Paper and board. Determination of grammage |
| ISO 535:2014 | Paper and board — Determination of water absorptiveness — Cobb method |
| ISO 1974:2012 | Paper — Determination of tearing resistance — Elmendorf method |
| UNI EN ISO 536 : 2012 | PAPER AND BOARD - DETERMINATION OF GRAMMAGE |
| UNE-ISO 2493-1:2014 | Paper and board - Determination of bending resistance - Part 1: Constant rate of deflection |
| BS EN ISO 534:2011 | Paper and board. Determination of thickness, density and specific volume |
| BS EN ISO 12625-6:2016 | Tissue paper and tissue products Determination of grammage |
| UNE-EN ISO 12625-5:2017 | Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2016) |
| ISO 12625-16:2015 | Tissue paper and tissue products Part 16: Determination of optical properties Opacity (paper backing) Diffuse reflectance method |
| UNE-EN ISO 534:2012 | Paper and board - Determination of thickness, density and specific volume (ISO 534:2011) |
| UNE-EN ISO 12625-3:2015 | Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (ISO 12625-3:2014) |
| BS EN ISO 12625-7:2014 | Tissue paper and tissue products Determination of optical properties. Measurement of brightness and colour with D65/10° (outdoor daylight) |
| UNE-EN ISO 2758:2014 | Paper - Determination of bursting strength (ISO 2758:2014) |
| ISO 2758:2014 | Paper Determination of bursting strength |
| ISO 536:2012 | Paper and board Determination of grammage |
| UNE-EN ISO 12625-6:2017 | Tissue paper and tissue products - Part 6: Determination of grammage (ISO 12625-6:2016) |
| UNE-EN ISO 2759:2014 | Board - Determination of bursting strength (ISO 2759:2014) |
| UNE-ISO 3781:2015 | Paper and board - Determination of tensile strength after inmersion in water |
| ISO 12625-4:2016 | Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption |
| EN ISO 535:2014 | Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:2014) |
| EN ISO 1974:2012 | Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012) |
| EN ISO 12625-16:2015 | Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015) |
| EN ISO 534:2011 | Paper and board - Determination of thickness, density and specific volume (ISO 534:2011) |
| EN ISO 3035:2011 | Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011) |
| EN ISO 2759:2014 | Board - Determination of bursting strength (ISO 2759:2014) |
| EN ISO 12625-15:2015 | Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2° (indoor daylight) illuminant (ISO 12625-15:2015) |
| EN ISO 3037:2013 | Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013) |
| EN ISO 2758:2014 | Paper - Determination of bursting strength (ISO 2758:2014) |
| TAPPI T 815 : 2012(R2018) | COEFFICIENT OF STATIC FRICTION (SLIDE ANGLE) OF PACKAGING AND PACKAGING MATERIALS (INCLUDING SHIPPING SACK PAPERS, CORRUGATED AND SOLID FIBERBOARD) (INCLINED PLANE METHOD) |
| 13/30247449 DC : 0 | BS ISO 16945 - CORRUGATING MEDIUM - DETERMINATION OF THE EDGE CRUSH RESISTANCE AFTER LABORATORY FLUTING |
| TAPPI T 622 : 2010 | ANALYSIS OF SODIUM HYDROSULFITE |
| BS ISO 18522:2016 | Paper and board. Automated off-line testing of physical properties for CD (cross direction) profiles |
| BS ISO 3034:2011 | Corrugated fibreboard. Determination of single sheet thickness |
| TAPPI T 559 : 2012 | GREASE RESISTANCE TEST FOR PAPER AND PAPERBOARD |
| 17/30323191 DC : DRAFT JAN 2017 | BS ISO 20494 - PAPER - REQUIREMENTS FOR STABILITY FOR GENERAL, GRAPHIC APPLICATIONS |
| TAPPI T 604 : 2009 | SULFUR DIOXIDE IN SULFITE COOKING LIQUOR |
| TAPPI T 567 : 2009 | DETERMINATION OF EFFECTIVE RESIDUAL INK CONCENTRATION (ERIC) BY INFRARED REFLECTANCE MEASUREMENT |
| TAPPI T 530 : 2012 | SIZE TEST FOR PAPER BY INK RESISTANCE |
| ASTM D 1749 : 1993 : R2002 | Standard Practice for Interlaboratory Evaluation of Test Methods Used with Paper and Paper Products |
| ASTM D 6125 : 1997 : R2002 | Standard Test Method for Bending Resistance of Paper and Paperboard (Gurley Type Tester) |
| ASTM D 1749 : 1993 : R1997 | Standard Practice for Interlaboratory Evaluation of Test Methods Used with Paper and Paper Products |
| TAPPI T 803 : 2010 | PUNCTURE TEST OF CONTAINER BOARD |
| TAPPI T 627 : 2009 | DETERMINATION OF TITANIUM DIOXIDE |
| 14/30219261 DC : 0 | BS ISO 5636-6 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE AND AIR RESISTANCE (MEDIUM RANGE) - PART 6: OKEN METHOD |
| TAPPI T 831 : 2014 | WATER ABSORPTION OF CORRUGATING MEDIUM: WATER DROP PENETRATION TEST |
| 13/30283977 DC : 0 | BS EN ISO 12625-16 - TISSUE PAPER AND TISSUE PRODUCTS - PART 16: DETERMINATION OF OPTICAL PROPERTIES - OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE FACTOR |
| DIN ISO 3034:2016-08 | CORRUGATED FIBREBOARD - DETERMINATION OF SINGLE SHEET THICKNESS (ISO 3034:2011) |
| ASTM D 6125 : 1997 : R2007 | Standard Test Method for Bending Resistance of Paper and Paperboard (Gurley Type Tester) (Withdrawn 2010) |
| ASTM D 1223 : 1993 : R1998 | Standard Test Method for Specular Gloss of Paper and Paperboard at 75° |
| PREN ISO 12625-3 : DRAFT 2013 | TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY (ISO/DIS 12625-3:2013) |
| UNI EN ISO 3035 : 2012 | CORRUGATED FIBREBOARD - DETERMINATION OF FLAT CRUSH RESISTANCE |
| TAPPI T 266 : 2011 | DETERMINATION OF SODIUM, CALCIUM, COPPER, IRON, AND MANGANESE IN PULP AND PAPER BY ATOMIC ABSORPTION SPECTROSCOPY |
| 13/30230645 DC : 0 | BS ISO 16260 - PAPER AND BOARD - DETERMINATION OF INTERNAL BOND STRENGTH |
| UNI ISO 8791-2 : 2014 | PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 2: BENDTSEN METHOD |
| BS EN ISO 3035:2011 | Corrugated fibreboard. Determination of flat crush resistance |
| TAPPI T 453 : 2013 | EFFECT OF DRY HEAT ON PROPERTIES OF PAPER AND BOARD |
| TAPPI T 222 : 2002 : R2011 | ACID-INSOLUBLE LIGNIN IN WOOD AND PULP |
| TAPPI T 252 : 2002 : R2007 | PH AND ELECTRICAL CONDUCTIVITY OF HOT WATER EXTRACTS OF PULP, PAPER, AND PAPERBOARD |
| TAPPI T 452 : 2008 | BRIGHTNESS OF PULP, PAPER AND PAPERBOARD (DIRECTIONAL REFLECTANCE AT 457 NM) |
| TAPPI T 464 : 2012 | WATER VAPOR TRANSMISSION RATE OF PAPER AND PAPERBOARD AT HIGH TEMPERATURE AND HUMIDITY |
| TAPPI T 646 : 2006 : R2011 | BRIGHTNESS OF CLAY AND OTHER MINERAL PIGMENTS (45/0) |
| TAPPI T 203 : 1999 | ALPHA-, BETA- AND GAMMA-CELLULOSE IN PULP |
| TAPPI T 544 : 2008 | AGING OF PAPER AND BOARD WITH MOIST HEAT |
| TAPPI T 438 : 2006 | ZINC AND CADMIUM IN PAPER |
| TAPPI T 231 : 2007 | ZERO-SPAN BREAKING STRENGTH OF PULP (DRY ZERO-SPAN TENSILE) |
| TAPPI T 455 : 2014 | IDENTIFICATION OF WIRE SIDE OF PAPER |
| UNE-EN ISO 1974:2013 | Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012) |
| I.S. EN ISO 12625-16:2015 | TISSUE PAPER AND TISSUE PRODUCTS - PART 16: DETERMINATION OF OPTICAL PROPERTIES - OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE METHOD (ISO 12625-16:2015) |
| I.S. EN ISO 12625-15:2015 | TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 DEGREES (INDOOR DAYLIGHT) ILLUMINANT (ISO 12625-15:2015) |
| TAPPI T 701 : PM 2001 | GRAVIMETRIC METHOD FOR MEASURING DEWATERING OF COATING COLORS (ABO-AKADEMI-TYPE METHOD) |
| TAPPI T 245 : 2007 | SILICATES AND SILICA IN PULP (WET ASH METHOD) |
| TAPPI T 282 : 2013 | HEXENEURONIC ACID CONTENT OF CHEMICAL PULP |
| TAPPI T 835 : 2014 | WATER ABSORPTION OF CORRUGATING MEDIUM: WATER DROP ABSORPTION TEST |
| TAPPI T 579 : 2012 | DIFFUSE BRIGHTNESS OF PAPER, PAPERBOARD AND PULP (D/0) (ULTRAVIOLET LEVEL D65) |
| UNE-ISO 16532-3:2017 | Paper and board. Determination of grease resistance. Part 3: Turpentine test for voids in glassine and greaseproof papers |
| UNE-EN ISO 12625-15:2015 | Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2° (indoor daylight) illuminant (ISO 12625-15:2015) |
| TAPPI T 577 : 2013 | SCORE BEND TEST |
| I.S. EN ISO 536:2012 | PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012) |
| ISO 12625-6:2016 | Tissue paper and tissue products Part 6: Determination of grammage |
| ISO 12625-5:2016 | Tissue paper and tissue products — Part 5: Determination of wet tensile strength |
| ISO 534:2011 | Paper and board — Determination of thickness, density and specific volume |
| ISO 12625-15:2015 | Tissue paper and tissue products — Part 15: Determination of optical properties — Measurement of brightness and colour with C/2° (indoor daylight) illuminant |
| ISO 3035:2011 | Corrugated fibreboard — Determination of flat crush resistance |
| DIN EN ISO 2759:2003-11 | BOARD - DETERMINATION OF BURSTING STRENGTH (ISO 2759:2014) |
| EN ISO 12625-3:2014 | Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (ISO 12625-3:2014) |
| TAPPI T 804 : 2012 | COMPRESSION TEST OF FIBERBOARD SHIPPING CONTAINERS |
| TAPPI T 650 : 2015 | SOLIDS CONTENT OF BLACK LIQUOR |
| TAPPI T 807 : 2011 | BURSTING STRENGTH OF LINERBOARD |
| TAPPI T 1206 : SP 91 | PRECISION STATEMENT FOR TEST METHODS |
US$49.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.