TT-P-664 Revision D:1988

Superseded

PRIMER, COATING, ALKYD, CORROSION INHIBITING, LEAD AND CHROMATE FREE, VOC COMPLIANT

Available format(s)

PDF

Superseded date

01-06-2000

Publisher

US Military Specs/Standards/Handbooks

Covers requirements for quick drying, high solids alkyd primer for pretreated ferrous and non ferrous metals. Contains no more than 420 grams per liter of volatile organic compounds.

Committee	FSC 8010
DevelopmentNote	D Notice 2 & 3 both state that the document is cancelled and future procurements should refer to SSPC-Paint 25. (14/8/00) Supersedes TT P 001385. (09/2004)
DocumentType	Standard
Pages	23
PublisherName	US Military Specs/Standards/Handbooks
Status	Superseded
Supersedes	TT-P-001385 Base Document:1976 TT-P-636 Revision D:1971

DOD-C-24529 Base Document:1976	CHARGERS, BATTERY, LIFT TRUCK AND PALLET TRANSPORTER BATTERY SERVICE (METRIC)
MIL-A-52679 Revision B:1983	ANCHOR, SURFACING MEMBRANE: 12 INCH
MIL-B-12745 Revision A:1973	BRIDGE ERECTION SET, FIXED BRIDGE, BASIC SET, FOR BRIDGES, STEEL, RAILWAY
MIL-E-16400 Revision H:1987	ELECTRONIC, INTERIOR COMMUNICATIONS AND NAVIGATION EQUIPMENT, NAVAL SHIP AND SHORE, GENERAL SPECIFICATION FOR
A-A-3067 Base Document:1996	PAINT: ALKYD, EXTERIOR, LOW VOC
MIL-A-516 Revision J:1981	AUGER, EARTH, SKIDMOUNTED; AND AUGER, EARTH, TURNTABLE BASE MOUNTED, POWER DRIVEN
MIL-S-196 Revision D:1988	SUPPORT ITEMS, ACCESSORIES, AND KITS, MECHANICAL; PACKAGING OF
MIL A 23798 : C	AIR CONDITIONER, FAN-COIL ASSEMBLY
PPP-G-2919 Base Document:1997	GENERATOR SETS, MOBILE ELECTRIC POWER AND SUPPLEMENTAL EQUIPMENT; PACKAGING OF
MIL-T-45309 Revision E:1983	TANK, COMBAT, FULL TRACKED, 105 MM GUN, M60, M60A1, M601A (RISE) & M60A3 PROCESSING FOR SHIPMENT & STORAGE OF
MIL-STD-193 Revision L:1991	PAINTING PROCEDURES AND MARKING FOR VEHICLES, CONSTRUCTION EQUIPMENT, MATERIAL HANDLING EQUIPMENT, AND SPARE PARTS
MIL-C-28794 Base Document:1973	Cabinet, Electronic Equipment (Single Bay) (No S/S Document)
MIL B 11352 : G	BLOCK, VISION, BULLET RESISTANT (METRIC)
MIL-E-17555 Revision H:1984	ELECTRONIC AND ELECTRICAL EQUIPMENT, ACCESSORIES, AND PROVISIONED ITEMS (REPAIR PARTS); PACKAGING OF
MIL-R-24159 Revision A:1983	RECEPTACLE, CANISTER, CO 2 ABSORBENT
MIL R 3593 : D	REFRIGERATION AND COOLING EQUIPMENT [EXCLUDING HOUSEHOLD REFRIGERATORS] PACKAGING OF
MIL-A-29247 Base Document:1986	AUGER, EARTH, TRUCK-MOUNTED, 4 BY 4, DIESEL ENGINE DRIVEN, 28,000 LB MINIMUM GVW, WITH POLE SETTER AND WIRE REEL
MIL-E-46096 Revision C:1973	ENAMEL, LUSTRELESS, QUICK DRYING, STYRENATED ALKYD TYPE, SOLAR HEAT REFLECTING
MIL-W-19882 Revision A:1960	WINCHES, DRUM, POWER OPERATED, BATHYTHERMOGRAPH
AWWA C503 : 2014	WET-BARREL FIRE HYDRANTS
MIL-C-10933 Revision E:1985	CHILLED WATER UNITS, BAKERY
MIL-C-14370 Revision D:1977	COMPRESSOR, RECIPROCATING, POWER-DRIVEN, OPEN-TYPE, FOR USE WITH REFRIGERANT-12
MIL M 29212 : B NOTICE 1	MIXING PLANT, ASPHALT, DRUM TYPE, PORTABLE, ELECTRIC MOTOR DRIVEN, 120 TONS PER HOUR CAPACITY
MIL-DTL-1716 Revision J:1997	POLE, TENT, TELESCOPIC, ADJUSTABLE 5 FEET TO 9 FEET, MAGNESIUM
MIL-B-43866 Revision C:1986	BREAD-SLICING MACHINE, ELECTRIC-OPERATED, MULTIPLE KNIFE
MIL A 24775 : 0	AIR CONDITIONING FAN COIL UNITS, HORIZONTAL AND VERTICAL TYPES, NAVAL SHIPBOARD
TT-E-527 Revision D:1988	ENAMEL, ALKYD, LUSTERLESS, LOW VOC CONTENT
MIL-C-13962 Revision B:1966	CRUSHING, SCREENING, AND WASHING PLANTS, DIESEL-ENGINE AND ELECTRIC-MOTOR DRIVEN, 225-TONS PER HOUR
MIL-STD-726 Revision H:1985	PACKAGING REQUIREMENTS CODE
MIL-B-18670 Revision A:1976	BOX, SMALL ARMS AMMUNITION, MARK 1 MOD 0
W-B-411 Revision A:1961	BLASTING MACHINE, GALVANOMETER, BLASTING, RESISTOR ASSEMBLY
MIL-I-983 Revision E:1966	INTERIOR COMMUNICATION EQUIPMENT, NAVAL SHIPBOARD, BASIC DESIGN REQUIREMENTS FOR
MIL-STD-1516 Revision B:1990	UNIFIED CODE FOR COATINGS AND FINISHES FOR DOD MATERIAL
MIL-B-12570 Revision D:1977	BAKERY OVEN, TRAILER MOUNTED, M-533
MIL-T-62050 Revision B:1985	TANK, COMBAT, FULL TRACKED, 105MM, GUN, M48A5, PROCESSING FOR STORAGE AND SHIPMENT OF
TT-E-489 Revision J:1994	ENAMEL, ALKYD, GLOSS, (FOR EXTERIOR AND INTERIOR SURFACES)
MIL-T-704 Revision K:1992	TREATMENT AND PAINTING OF MATERIAL
MIL-P-10603 Revision E:1990	PUMP AND PUMPING UNITS, CENTRIFUGAL, POWER-DRIVEN FOR WATER PACKAGING OF
PPP-C-96 Revision E:1992	CAN, METAL, 28 GAGE AND LIGHTER
MIL-B-45022 Revision F:1992	BLAST CLEANING CABINETS
MIL-HDBK-772 Base Document:1981	MILITARY PACKAGING ENGINEERING
MIL-B-2316 Revision E:1992	BAKERY EQUIPMENT, INCLUDING UNITS ASSEMBLIES REPAIR PARTS AND TOOLS, PREPARATION FOR DELIVERY OF
MIL-B-26793 Revision B:1958	BLOWER, GASOLINE ENGINE DRIVEN, TYPE A-1
MIL-A-26107 Revision D:1960	AIR CONDITIONER, TRAILER-MOUNTED, FREON CYCLE, 11-1/2 TON REFRIGERATING CAPACITY, TYPE MA-3
MIL S 24412 : NOTICE 1	STEEL, SPECIAL STRUCTURAL SHAPE, WELDABLE, HIGH TENSILE (HT), FOR SUBMARINE HULLS
MIL-STD-1303 Revision B:1975	PAINTING OF NAVAL ORDNANCE EQUIPMENT
MIL C 19836 : B	COOLER, FLUID, INDUSTRIAL, AIR MOTOR AND GENERATOR, NAVAL SHIPBOARD
MIL-C-13522 Revision C:1966	CRUSHER, JAW, ROCK, AIRBORNE, 15-TPH CAPACITY
MIL W 18445 : D	WINDOWS, NON-ICING, LAMINATED FLAT GLASS, ELECTRICALLY HEATED, WITH CONTROLS
MIL-STD-1223 Revision AC:1991	NONTACTICAL WHEELED VEHICLES TREATMENT, PAINTING, IDENTIFICATION MARKING AND DATA PLATE STANDARDS'
MIL L 3976 : D	LIGHTS, MARKER, CLEARANCE (SERVICE & BLACKOUT)
MIL-B-233 Revision D:1987	BOXES, SUPPLY SUPPORT ITEMS, STOWAGE AND STORAGE
MIL-P-18948 Revision B:1992	PROJECTILE, PAINTING, MARKING AND GREASING (BY PROJECTILE MANUFACTURERS)
MIL-STD-162 Revision E:1980	MATERIALS HANDLING EQUIPMENT PREPARATION FOR SHIPMENT, STORAGE, CYCLIC MAINTENANCE ROUTINE TESTING AND PROCESS
MIL-HDBK-1223 Base Document:1998	NONTACTICAL WHEELED VEHICLES TREATMENT, PAINTING, IDENTIFICATION MARKING AND DATA PLATE STANDARDS
MIL-B-10122 Revision E:1991	BARGE, LIQUID CARGO: NONPROPELLED, STEEL, OFFSHORE, 4,160-BARREL, 120-FOOT, DESIGN 231C
MIL R 196 : C	REPAIR PARTS, ACCESSORIES, AND KITS, MECHANICAL, PACKAGING OF
MIL-C-3580 Revision E:1991	CRANES AND CRANE SHOVELS, TRUCK, CRAWLER, AND WHEEL MOUNTED FULL REVOLVING AND THEIR ATTACHMENTS, PACKAGING OF
GGG-L-795 Revision E:1990	LUBRICATING UNIT, POWER OPERATED, AND PUMPING UNITS, PRESSURE LUBRICATING, DRUM MOUNTING
MIL-C-3600 Revision E:1991	COMPRESSOR, AIR AND GAS [EXCEPT OXYGEN] PACKAGING OF
MIL-S-51173 Revision A:1964	SERVICE UNIT, FLAME THROWER, TRUCK MOUNTED, M4A2
MIL-B-3630 Revision D:1983	BATCHING PLANT, AGGREGATE MOBILE, THREE-COMPARTMENT, 60-TON CAPACITY
TT-E-515 Revision A:1971	ENAMEL, ALKYD, LUSTERLESS, QUICK-DRYING
MIL-B-43177 Revision B:1977	BALING PRESSES
MIL-R-24358 Base Document:1968	RESTORATION SHIPBOARD ELECTRONIC EQUIPMENT F, 1N AND 2N COGNIZANCE
MIL-G-762 Revision E:1990	GRADER, ROAD, PACKAGING OF
MIL-R-8573 Revision A:1957	RESERVOIRS, AIR, NONSHATTERABLE STEEL
MIL-B-45081 Revision E:1991	BLAST CLEANING MACHINE: SELF-CONTAINED TUMBLE TYPE, WITH DUST COLLECTOR
MIL-B-3180 Revision E:1990	BOILERS AND RELATED EQUIPMENT; PACKAGING OF
MIL-R-12323 Revision G:1992	REFRIGERATOR AND RELATED EQUIPMENT, PACKAGING AND PACKING OF
MIL-L-51050 Revision B:1971	LABORATORY, PETROLEUM,SEMITRAILER MOUNTED
MIL-W-52624 Revision B:1989	WATER PURIFICATION UNIT & WATER PURIFICATION EQUIPMENT SET, 600GPH PACKAGING OF
DOD-P-28682 Base Document:1987	CONCRETE PLANT, MOBILE, SEMITRAILER MOUNTED, 6 CUBIC METERS BULK MATERIAL CAPACITY (METRIC)
MIL-S-12651 Revision F:1983	SPRAYER, PACKAGING OF
MIL-G-28554 Revision C:1988	GENERATOR SET, MOBILE ELECTRIC POWER AND SUPPLEMENTAL EQUIPMENT, PACKAGING OF
MIL-M-18058 Revision G:1990	MACHINERY, METAL & WOODWORKING PACKAGING OF
TT-E-529 Revision G:1988	ENAMEL, ALKYD, SEMIGLOSS, LOW VOC CONTENT
PPP-B-2920 Base Document:1997	BOILERS AND RELATED EQUIPMENT, PACKAGING OF
MIL-D-771 Revision E:1990	DISTRIBUTOR, BITUMEN AND WATER, PACKAGING OF
MIL-I-2925 Revision B:1967	INDICATOR, CARBON DIOXIDE, CHEMICAL ABSORPTION TYPE, PORTABLE
MIL-T-3351 Revision E:1990	TRACTOR, FULL TRACKED, LOW SPEED, TRACTOR WHEELED, AGRICULTURAL AND TRACTOR WHEELED, INDUSTRIAL AND THEIR ATTACHMENTS, PACKAGING OF
MIL-D-3209 Revision C:1973	DISTILLATION UNITS, WATER, THERMOCOMPRESSION TYPE, PACKAGING OF
MIL C 24275 : 0	CABLE REELS, ACOUSTIC, COMPLETE WITH HYDRAULIC MOTOR AND CONTROLS (FOR NAVAL SHIPBOARD USE)
MIL C 11090 : F (1)	CLEANING COMPOUND, DEGREASING AND DEPRESERVING SOLVENT, SELF-EMULSIFYING
MIL-F-38762 Base Document:1966	FLUORESCENT PENETRANT INSPECTION UNITS
MIL-H-81324 Base Document:1966	HONING MACHINE, DRY PORTABLE
MIL-C-43460 Revision B:1979	COATING, LUSTERLESS, FOR HELMETS AND LINERS'
MIL F 18953 : B	FAN, VANEAXIAL AND TUBEAXIAL, FIXED AND PORTABLE, VENTILATION, NAVAL SHIPBOARD
KKK-A-2809 Base Document:1986	AUGER, EARTH, TRUCK MOUNTED, 4 BY 4, DIESEL ENGINE DRIVEN, 28,000 LB MINIMUM GVW, WITH POLE SETTER AND WIRE REEL
MIL F 14072 : D	FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT
MIL-P-710 Revision F:1990	PUMP, DEEP WELL, PACKAGING OF

TT-T-266 Revision D:1976	THINNER, DOPE AND LACQUER (CELLULOSE NITRATE)
FED-STD-313 Revision D:1996	MATERIAL SAFETY DATA, TRANSPORTATION DATA AND DISPOSAL DATA FOR HAZARDOUS MATERIALS FURNISHED TO GOVERNMENT ACTIVITIES
MIL L 11195 : D	LACQUER, LUSTRELESS, HOT SPRAY
TT-E-489 Revision J:1994	ENAMEL, ALKYD, GLOSS, (FOR EXTERIOR AND INTERIOR SURFACES)
PPP-T-60 Revision E:1986	TAPE, PACKAGING, WATERPROOF
ASTM D 610 : 2008	Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
TT-S-735 Revision A:1988	STANDARD TEST FLUIDS, HYDROCARBON
ASTM D 562 : 2010	Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
MIL C 5541 : E	CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS
TT-T-306 Revision E:1993	THINNER, SYNTHETIC RESIN, ENAMELS
ASTM D 1639 : 1990 : R1996 : EDT 1	Standard Test Method for Acid Value of Organic Coating Materials (Withdrawn 2005)
QQ-A-250-5 Revision F:1971	ALUMINUM ALLOY ALCLAD 2024, PLATE AND SHEET
FED-STD-141 Revision D:2001	PAINT, VARNISH, LACQUER AND RELATED MATERIALS, METHODS OF INSPECTION, SAMPLING AND TESTING
TT-C-490 Revision F:2013	CHEMICAL CONVERSION COATINGS AND PRETREATMENTS FOR METALLIC SUBSTRATES (BASE FOR ORGANIC COATINGS)
PPP-P-1892 Base Document:1974	PAINT, VARNISH, LACQUER AND RELATED MATERIALS, PACKAGING, PACKING, AND MARKING OF