UNE-EN 13000:2010

Superseded

View Superseded by

Cranes - Mobile cranes

Amended by

UNE-EN 13000:2010 ERRATUM:2010

Available format(s)

Hardcopy , PDF

Superseded date

12-03-2014

Published date

09-01-2010

Publisher

Asociacion Espanola de Normalizacion

Committee	CTN 58
DevelopmentNote	2010 Edition Re-Issued in December 2014 & incorporates AMD 1 2014. (12/2014)
DocumentType	Standard
Pages	116
PublisherName	Asociacion Espanola de Normalizacion
Status	Superseded
SupersededBy	UNE-EN 13000:2010+A1:2014
Supersedes	UNE-EN 13000:2006

Standards	Relationship
I.S. EN 13000:2010	Identical
BS EN 13000 : 2010	Identical
DIN EN 13000:2014-11	Identical
NEN EN 13000 : 2010 + A1 2014	Identical
NS EN 13000 : 2010 + A1 2014	Identical
NF EN 13000 : 2010 + A1 2014	Identical
SN EN 13000+A1:2014	Identical
ONORM EN 13000 : 2016	Identical
UNI EN 13000 : 2014	Identical
EN 13000:2010+A1:2014	Identical
NBN EN 13000 : 2010 + A1 2014	Identical
EN 13000:2010	Identical

DIN 15403:1969-12	LIFTING HOOKS FOR HOISTS; KNUCKLE THREADS
EN 854:2015	Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
EN 294:1992/AC:1993	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS
IEC 61672-2:2013+AMD1:2017 CSV	Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests
ISO 4308-1:2003	Cranes and lifting appliances Selection of wire ropes Part 1: General
ISO 11660-2:2015	Cranes Access, guards and restraints Part 2: Mobile cranes
EN 894-3:2000+A1:2008	Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
IEC 61000-6-4:2006+AMD1:2010 CSV	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
EN 856:2015	Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification
EN 13557:2003+A2:2008	Cranes - Controls and control stations
EN 982:1996+A1:2008	Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
ISO 4871:1996	Acoustics — Declaration and verification of noise emission values of machinery and equipment
EN 1037:1995+A1:2008	Safety of machinery - Prevention of unexpected start-up
ISO 5349-2:2001	Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace
ISO 11660-1:2008	Cranes — Access, guards and restraints — Part 1: General
ISO 3744:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
EN 547-2:1996+A1:2008	Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
EN ISO 6683:2008	Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests (ISO 6683:2005)
ISO 12480-1:1997	Cranes Safe use Part 1: General
ISO 4306-1:2007	Cranes — Vocabulary — Part 1: General
IEC 61310-2:2007	Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
ISO/TR 11688-1:1995	Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
EN 894-2:1997+A1:2008	Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
ISO 4310:2009	Cranes — Test code and procedures
ISO 7096:2000	Earth-moving machinery Laboratory evaluation of operator seat vibration
IEC 61000-6-2:2016	Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
ISO 3411:2007	Earth-moving machinery Physical dimensions of operators and minimum operator space envelope
ISO 6683:2005	Earth-moving machinery Seat belts and seat belt anchorages Performance requirements and tests
EN 61310-2:2008	Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
EN ISO 3411:2007	Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007)
ISO 7250:1996	Basic human body measurements for technological design
EN 14502-2:2005+A1:2008	Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations
EN 61672-2:2013/A1:2017	ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS (IEC 61672-2:2013/A1:2017)
ISO 13732-1:2006	Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
ISO 5353:1995	Earth-moving machinery, and tractors and machinery for agriculture and forestry Seat index point
ISO 8566-2:2016	Cranes — Cabins and control stations — Part 2: Mobile cranes
EN 811 : 1996	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS
EN 349:1993+A1:2008	Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
ISO 13200:1995	Cranes Safety signs and hazard pictorials General principles
EN 547-1:1996+A1:2008	Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
EN ISO 13850:2015	Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
ISO 4308-2:1988	Cranes and lifting appliances Selection of wire ropes Part 2: Mobile cranes Coefficient of utilization
ISO 11662-1:1995	Mobile cranes — Experimental determination of crane performance — Part 1: Tipping loads and radii
ISO 8686-1:2012	Cranes — Design principles for loads and load combinations — Part 1: General
IEC 60204-32:2008	Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
EN 13586:2004+A1:2008	Cranes - Access
EN 1050 : 1996	SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
DIN 15401-1:1982-11	LIFTING HOOKS; SHANK HOOKS WITH A POINT; FORGINGS
EN ISO 7731:2008	Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)
EN 614-1:2006+A1:2009	Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
EN ISO 4014:2011	Hexagon head bolts - Product grades A and B (ISO 4014:2011)
EN ISO 11688-2 : 2000	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
EN 10025-1:2004	Hot rolled products of structural steels - Part 1: General technical delivery conditions
EN 12644-1:2001+A1:2008	Cranes - Information for use and testing - Part 1: Instructions
ISO 7731:2003	Ergonomics Danger signals for public and work areas Auditory danger signals
EN ISO 5349-2:2001/A1:2015	MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE (ISO 5349 2:2001/AMD 1:2015)
ISO 7752-2:2011	Cranes — Control layout and characteristics — Part 2: Basic arrangement and requirements for mobile cranes
ISO 3795:1989	Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials
EN ISO 13732-1:2008	Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
EN 60204-32:2008	Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
EN ISO 5353:1998	Earth-moving machinery, and tractors and machinery for agriculture and forestry - Seat index point (ISO 5353:1995)
EN ISO 11201:2010	Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
EN 13001-2:2014	Crane safety - General design - Part 2: Load actions
ISO 10973:1995	Cranes Spare parts manual
EN 626-2:1996+A1:2008	Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures
EN ISO 12100-1:2003/A1:2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN 61672-1:2013	Electroacoustics - Sound level meters - Part 1: Specifications
ISO 4301-2:2009	Cranes Classification Part 2: Mobile cranes
ISO 4309:2010	Cranes Wire ropes Care and maintenance, inspection and discard
EN 61000-6-2:2005/corrigendum:2005	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005)
EN ISO 5349-1 : 2001	MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS (ISO 5349-1:2001)
ISO 4305:2014	Mobile cranes Determination of stability
EN ISO 3744:2010	Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
EN 953:1997+A1:2009	Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
EN 842:1996+A1:2008	Safety of machinery - Visual danger signals - General requirements, design and testing
EN 61000-6-4:2007/A1:2011	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
EN ISO 6385:2016	ERGONOMIC PRINCIPLES IN THE DESIGN OF WORK SYSTEMS (ISO 6385:2016)
ISO 8087:1985	Mobile cranes Drum and sheave sizes
ISO 13849-2:2012	Safety of machinery — Safety-related parts of control systems — Part 2: Validation
ISO 8995-3:2006	Lighting of work places Part 3: Lighting requirements for safety and security of outdoor work places
ISO 12100-2:2003	Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
ISO 6309:1987	Fire protection — Safety signs
EN ISO 12100-2:2003/A1:2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
EN 10025-2:2004/AC:2005	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
ISO 7296-2:1996	Cranes Graphical symbols Part 2: Mobile cranes
IEC 61000-6-4:2006+AMD1:2010 CSV	Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
ISO 2631-1:1997	Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements
ISO 3864-1:2011	Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
EN ISO 13849-2:2012	Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012)
ISO 261:1998	ISO general purpose metric screw threads General plan
DIN 15400:1990-06	LIFTING HOOKS - MATERIALS, MECHANICAL PROPERTIES, LIFTING CAPACITY AND STRESSES
EN 983:1996+A1:2008	Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
EN 10025-6:2004+A1:2009	Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
EN 954-1 : 1996	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
ISO 12100-1:2003	Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
EN ISO 13849-1:2015	Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
ISO 13850:2015	Safety of machinery Emergency stop function Principles for design
EN ISO 4871:2009	Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
IEC 61310-1:2007	Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN ISO 7250 : 1997	BASIC HUMAN BODY MEASUREMENTS FOR TECHNOLOGICAL DESIGN
ISO 5349-1:2001	Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements
EN 626-1:1994+A1:2008	Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
DIN 15061-2:1977-08	CRANES; GROOVE PROFILES FOR WIRE ROPE DRUMS
DIN 15401-2:1983-09	LIFTING HOOKS FOR LIFTING APPLIANCES - SINGLE HOOKS - FINISHED PARTS WITH THREADED SHANK
EN 1005-3:2002+A1:2008	Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
EN 853:2015	Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
ISO 7000:2014	Graphical symbols for use on equipment Registered symbols
ISO 4301-1:2016	Cranes — Classification — Part 1: General
EN ISO 11688-1:2009	Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
ISO 13849-1:2015	Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
EN 10025-3:2004	Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
ISO/TR 11688-2:1998	Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
EN 61310-1:2008	Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
IEC 61000-6-2 : 3.0:2016	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
ISO 12482-1:1995	Cranes Condition monitoring Part 1: General
ISO 4306-2:1994	Cranes — Vocabulary — Part 2: Mobile cranes
ISO 6385:2016	Ergonomics principles in the design of work systems
ISO 8995-1:2002	Lighting of work places Part 1: Indoor
ISO 11201:2010	Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
EN 2:1992/A1:2004	CLASSIFICATION OF FIRES
1987/404/EEC : 1987	COUNCIL DIRECTIVE OF 25 JUNE 1987 ON THE HARMONIZATION OF THE LAWS OF THE MEMBER STATES RELATING TO SIMPLE PRESSURE VESSELS
EN ISO 7096:2008/AC:2009	EARTH-MOVING MACHINERY - LABORATORY EVALUATION OF OPERATOR SEAT VIBRATION
ISO 4014:2011	Hexagon head bolts Product grades A and B