EN 10293:2015
|
Steel castings - Steel castings for general engineering uses
|
UIC 527-1 : 3ED 2005
|
COACHES, VANS AND WAGONS - DIMENSIONS OF BUFFER HEADS - TRACK LAYOUT ON S-CURVES
|
ISO 6507-4:2005
|
Metallic materials Vickers hardness test Part 4: Tables of hardness values
|
ISO 815-2:2014
|
Rubber, vulcanized or thermoplastic Determination of compression set Part 2: At low temperatures
|
EN 10025-4:2004
|
Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
|
PN 88/H-83160 : 1988
|
ABRASIVE WEAR RESISTANT CAST STEEL - GRADES
|
EN ISO 6892-1:2016
|
Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
|
UIC 827-1 : 2ED 1990
|
TECHNICAL SPECIFICATION FOR THE SUPPLY OF ELASTOMER COMPONENTS FOR BUFFERS
|
UIC 528 : 8ED 2007
|
BUFFER GEAR FOR COACHES
|
EN 15085-1:2007+A1:2013
|
Railway applications - Welding of railway vehicles and components - Part 1: General
|
ISO 148-2:2016
|
Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines
|
ISO 815-1:2014
|
Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures
|
ISO 6507-2:2005
|
Metallic materials Vickers hardness test Part 2: Verification and calibration of testing machines
|
ISO 11469:2016
|
Plastics — Generic identification and marking of plastics products
|
ISO 6892-1:2016
|
Metallic materials Tensile testing Part 1: Method of test at room temperature
|
ISO 188:2011
|
Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
|
EN 15839:2012+A1:2015
|
Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Freight wagons - Testing of running safety under longitudinal compressive forces
|
EN 10168:2004
|
Steel products - Inspection documents - List of information and description
|
EN ISO 11469:2016
|
Plastics - Generic identification and marking of plastics products (ISO 11469:2016)
|
EN 10025-1:2004
|
Hot rolled products of structural steels - Part 1: General technical delivery conditions
|
UIC 526-3 : 3ED 2008
|
WAGONS - BUFFERS WITH A STROKE OF 130 AND 150 MM
|
ISO 6507-3:2005
|
Metallic materials Vickers hardness test Part 3: Calibration of reference blocks
|
ISO 148-1:2016
|
Metallic materials — Charpy pendulum impact test — Part 1: Test method
|
EN 15273-1:2013+A1:2016/AC:2017
|
RAILWAY APPLICATIONS - GAUGES - PART 1: GENERAL - COMMON RULES FOR INFRASTRUCTURE AND ROLLING STOCK
|
EN 15227:2008+A1:2010
|
Railway applications - Crashworthiness requirements for railway vehicle bodies
|
EN 10243-1:1999/AC:2005
|
STEEL DIE FORGINGS - TOLERANCES ON DIMENSIONS - PART 1: DROP AND VERTICAL PRESS FORGINGS
|
EN 1370:2011
|
Founding - Examination of surface condition
|
PREN 16839 : DRAFT 2015
|
RAILWAY APPLICATIONS - ROLLING STOCK - HEAD STOCK LAYOUT
|
UIC 573 : 7ED 2007
|
TECHNICAL CONDITIONS FOR THE CONSTRUCTION OF TANK WAGONS
|
ISO 148-3:2016
|
Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
|
EN 10025-5:2004
|
Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
|
EN 10204:2004
|
Metallic products - Types of inspection documents
|
EN 10025-2:2004/AC:2005
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
|
NFF 10 102 : 1998
|
RAILWAY ROLLING STOCK - BUFFERS FOR FREIGHT ROLLING STOCK - ENVELOPES AND COMPONENT PARTS
|
UIC 827-2 : 3ED 1981
|
TECHNICAL SPECIFICATION FOR THE SUPPLY OF STEEL RINGS FOR BUFFER SPRINGS
|
EN 1563:2011
|
Founding - Spheroidal graphite cast irons
|
UIC 571-2 : 6ED 2001
|
STANDARD WAGONS - ORDINARY BOGIE WAGONS - CHARACTERISTICS
|
UIC 526-1 : 3ED 2008
|
WAGONS - BUFFERS WITH A STROKE OF 105 MM
|
EN 10025-6:2004+A1:2009
|
Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
|
EN ISO 148-2:2016
|
Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO 148-2:2016)
|
ISO 37:2017
|
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
|
EN ISO 148-3:2016
|
Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016)
|
EN ISO 868:2003
|
Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
|
EN 15085-2:2007
|
Railway applications - Welding of railway vehicles and components - Part 2: Quality requirements and certification of welding manufacturer
|
EN ISO 148-1:2016
|
Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
|
ISO 48:2010
|
Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)
|
EN 12663 : 2000
|
RAILWAY APPLICATIONS - STRUCTURAL REQUIREMENTS OF RAILWAY VEHICLE BODIES
|
EN 10025-3:2004
|
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
|
UIC 535-2 : 4ED 2005
|
STANDARDISATION AND POSITIONING ON WAGONS OF STEPS, END PLATFORMS, GANGWAYS, HANDRAILS, TOW HOOKS, AUTOMATIC COUPLER (AC), AUTOMATIC DRAW-ON COUPLING AND BRAKE VALVE CONTROLS ON THE UIC MEMBER RUS AND OSJD MEMBER RUS
|
EN 15085-3:2007/AC:2009
|
RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS
|
EN 15085-4:2007
|
Railway applications - Welding of railway vehicles and components - Part 4: Production requirements
|
UIC 840-2 : 3ED 1981
|
TECHNICAL SPECIFICATION FOR THE SUPPLY OF STEEL CASTINGS FOR TRACTIVE AND TRAILING STOCK
|
ISO 868:2003
|
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
|