UNE-EN 50548:2012

Withdrawn

Junction boxes for photovoltaic modules

Amended by

UNE-EN 50548:2012/A1:2013

Available format(s)

Hardcopy , PDF

Withdrawn date

09-06-2018

Published date

02-29-2012

Publisher

Asociacion Espanola de Normalizacion

Committee	CTN 220
DocumentType	Standard
Pages	44
PublisherName	Asociacion Espanola de Normalizacion
Status	Withdrawn

Standards	Relationship
EN 50548:2011	Identical
EN 50548 : 2011 AMD 2 2014	Identical

IEC 60512-12-1:2006	Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method
IEC 60695-11-20:2015	Fire hazard testing - Part 11-20: Test flames - 500 W flame test method
EN 60999-2:2003	Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm² up to 300 mm² (included)
IEC 60512-12-2:2006	Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method
EN 60352-2:2006/A1:2013	SOLDERLESS CONNECTIONS - PART 2: CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
IEC 60352-3:1993	Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance
IEC 60068-2-70:1995	Environmental testing - Part 2-70: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands
EN 60068-2-75:2014	Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
IEC 60364-7-712:2017	Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems
IEC 60228:2004	Conductors of insulated cables
EN 60998-2-2:2004	Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units
IEC 60068-1:2013	Environmental testing - Part 1: General and guidance
IEC 61215:2005	Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval
EN ISO 4892-3:2016	Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016)
EN 60352-3:1994	Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance
EN 60695-10-2:2014	Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
IEC 61730-2:2016	Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing
EN 60512-12-2:2006/corrigendum Dec. 2006	CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-2: SOLDERING TESTS - TEST 12B: SOLDERABILITY, WETTING, SOLDERING IRON METHOD
EN 60068-1:2014	Environmental testing - Part 1: General and guidance
EN 61646:2008	THIN-FILM TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
IEC 60999-2:2003	Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included)
EN 60060-1:2010	High-voltage test techniques - Part 1: General definitions and test requirements
EN 61730-1:2007/A11:2014	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION (IEC 61730-1:2004, MODIFIED)
EN 60998-2-1:2004	Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units
IEC 60695-2-11:2014	Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
EN 60228:2005 COR 2005	CONDUCTORS OF INSULATED CABLES
EN 60512-1:2001	Connectors for electronic equipment - Tests and measurements - Part 1: General
IEC 60947-7-1:2009	Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
IEC 60999-1:1999	Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included)
IEC 61646:2008	Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval
IEC 60998-2-2:2002	Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units
EN 61730-2:2007/A1:2012	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2004/A1:2011)
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
ISO 4892-3:2016	Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps
IEC TR 60943:1998+AMD1:2008 CSV	Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals
EN 50521:2008/A1:2012	CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
IEC 61730-1:2016	Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction
IEC 60695-11-10:2013	Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
EN 61032:1998	Protection of persons and equipment by enclosures - Probes for verification
EN 60664-1:2007	Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
HD 60364-7-712:2016	Low-voltage electrical installations - Part 7-712: Requirements for special installations or locations - Photovoltaic (PV) systems
EN 60068-2-78:2013	Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
ISO 4892-2:2013	Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
IEC 60352-2:2006+AMD1:2013 CSV	Solderless connections - Part 2: Crimped connections - Generalrequirements, test methods and practical guidance
IEC 60050-826:2004	International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations
IEC 60068-2-75:2014	Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
EN 60999-1:2000	Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm² up to 35 mm² (included)
EN 61140:2016	Protection against electric shock - Common aspects for installation and equipment
EN 60352-4:1994/A1:2000	SOLDERLESS CONNECTIONS - PART 4: SOLDERLESS NON-ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
IEC 60695-10-2:2014	Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
EN ISO 868:2003	Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
EN 60529:1991/AC:2016-12	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN 60068-2-70:1996	Environmental testing - Part 2: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands
IEC 60060-1:2010	High-voltage test techniques - Part 1: General definitions and test requirements
IEC 60512-1:2001	Connectors for electronic equipment - Tests and measurements - Part 1: General
IEC 61140:2016	Protection against electric shock - Common aspects for installation and equipment
EN 60947-7-1:2009	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-1: ANCILLARY EQUIPMENT - TERMINAL BLOCKS FOR COPPER CONDUCTORS
EN 60512-12-1:2006	Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method
IEC 61032:1997	Protection of persons and equipment by enclosures - Probes for verification
IEC 60068-2-14:2009	Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60664-1:2007	Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
EN ISO 4892-2:2013	Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
EN 60068-2-14:2009	Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60050-581:2008	International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment
IEC 60998-2-1:2002	Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units
EN 61215:2005	Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval
EN 60695-2-11:2014	Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014)
ISO 868:2003	Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)