|
IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV
|
Information technology equipment - Safety - Part 1: General requirements
|
|
IEC 60112:2003+AMD1:2009 CSV
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials
|
|
IEC 60320-1:2015
|
Appliance couplers for household and similar general purposes - Part 1: General requirements
|
|
IEC 61672-2:2013+AMD1:2017 CSV
|
Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests
|
|
IEC 61558-2-1:2007
|
Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
|
|
IEC 60245-1:2003+AMD1:2007 CSV
|
Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements
|
|
ISO 7010:2011
|
Graphical symbols Safety colours and safety signs Registered safety signs
|
|
IEC 60384-14:2013+AMD1:2016 CSV
|
Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
|
|
UL 1439:5ED 2015-04
|
Tests for Sharpness of Edges on Equipment
|
|
IEC 60364-7-710:2002
|
Electrical installations of buildings - Part 7-710: Requirements for special installations or locations - Medical locations
|
|
IEC 60127-6:2014
|
Miniature fuses - Part 6: Fuse-holders for miniature fuse-links
|
|
IEC 60050-195:1998
|
International Electrotechnical Vocabulary (IEV) - Part 195: Earthing and protection against electric shock
|
|
ISO 11135:2014
|
Sterilization of health-care products Ethylene oxide Requirements for the development, validation and routine control of a sterilization process for medical devices
|
|
IEC 60695-1-1:1999
|
Fire hazard testing - Part 1-1: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
|
|
IEC 60364-4-41:2005+AMD1:2017 CSV
|
Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
|
|
IEC 60073:2002
|
Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
|
|
ISO 23529:2016
|
Rubber General procedures for preparing and conditioning test pieces for physical test methods
|
|
ISO 2882:1979
|
Rubber, vulcanized — Antistatic and conductive products for hospital use — Electrical resistance limits
|
|
ISO 9614-1:1993
|
Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points
|
|
IEC 60050-151:2001
|
International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
|
|
IEC 60884-1:2002+AMD1:2006+AMD2:2013 CSV
|
Plugs and socket-outlets for household and similar purposes - Part1: General requirements
|
|
IEC 61000-4-11:2004+AMD1:2017 CSV
|
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
|
|
IEC 60050-441:1984
|
International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses
|
|
IEC TR 60788:2004
|
Medical electrical equipment - Glossary of defined terms
|
|
ISO 13852:1996
|
Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs
|
|
IEC 60601-1-6:2010+AMD1:2013 CSV
|
Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability
|
|
ISO 13485:2016
|
Medical devices Quality management systems Requirements for regulatory purposes
|
|
IEC 60825-1:2014
|
Safety of laser products - Part 1: Equipment classification and requirements
|
|
NFPA 53 : 2016
|
MATERIALS, EQUIPMENT, AND SYSTEMS USED IN OXYGEN-ENRICHED ATMOSPHERES
|
|
IEC 60601-1-8:2006+AMD1:2012 CSV
|
Medical electrical equipment - Part 1-8: General requirements forbasic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems inmedical electrical equipment and medical electrical systems
|
|
IEC TR 60513:1994
|
Fundamental aspects of safety standards for medical electrical equipment
|
|
IEC 60127-1:2006+AMD1:2011+AMD2:2015 CSV
|
Miniature fuses - Part 1: Definitions for miniature fuses andgeneral requirements for miniature fuse-links
|
|
IEC 60851-6:2012
|
Winding wires - Test methods - Part 6: Thermal properties
|
|
IEC 60079-5:2015 RLV
|
Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
|
|
IEC 60851-5:2008+AMD1:2011 CSV
|
Winding wires - Test methods - Part 5: Electrical properties
|
|
IEC 60227-1:2007
|
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
|
|
EN 563:1994/A1:1999/AC:2000
|
SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES
|
|
IEC 60601-2-4:2010
|
Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
|
|
IEC 60601-1-2:2014
|
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests
|
|
IEC 60085:2007
|
Electrical insulation - Thermal evaluation and designation
|
|
ISO/IEC Guide 51:2014
|
Safety aspects Guidelines for their inclusion in standards
|
|
IEC 61558-1:2017
|
Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
|
|
IEC 62304:2006+AMD1:2015 CSV
|
Medical device software - Software life cycle processes
|
|
ISO 3746:2010
|
Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
|
|
IEC 60447:2004
|
Basic and safety principles for man-machine interface, marking and identification - Actuating principles
|
|
IEC TR 60878:2015
|
Graphical symbols for electrical equipment in medical practice
|
|
ISO 780:2015
|
Packaging Distribution packaging Graphical symbols for handling and storage of packages
|
|
ISO 14708-1:2014
|
Implants for surgery — Active implantable medical devices — Part 1: General requirements for safety, marking and for information to be provided by the manufacturer
|
|
MIL-HDBK-217 Revision F:1991
|
RELIABILITY PREDICTION OF ELECTRONIC EQUIPMENT
|
|
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code)
|
|
IEC 61058-1:2016
|
Switches for appliances - Part 1: General requirements
|
|
NFPA 99 : 2018
|
HEALTH CARE FACILITIES CODE
|
|
IEC 60068-2-2:2007
|
Environmental testing - Part 2-2: Tests - Test B: Dry heat
|
|
IEC 60695-11-10:2013
|
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
|
|
IEC 60601-1-3:2008+AMD1:2013 CSV
|
Medical electrical equipment - Part 1-3: General requirements forbasic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipment
|
|
IEC 60079-6:2015
|
Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
|
|
IEC 60079-0:2011
|
Explosive atmospheres - Part 0: Equipment - General requirements
|
|
ISO 8041:2005
|
Human response to vibration Measuring instrumentation
|
|
IEC 60851-3:2009+AMD1:2013 CSV
|
Winding wires - Test methods - Part 3: Mechanical properties
|
|
IEC 62079:2001
|
Preparation of instructions - Structuring, content and presentation
|
|
ISO 2878:2017
|
Rubber, vulcanized or thermoplastic Antistatic and conductive products Determination of electrical resistance
|
|
IEC 60086-1:2015
|
Primary batteries - Part 1: General
|
|
ISO 3864-1:2011
|
Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
|
|
IEC 60252-1:2010+AMD1:2013 CSV
|
AC motor capacitors - Part 1: General - Performance, testing andrating - Safety requirements - Guidance for installation and operation
|
|
ISO 407:2004
|
Small medical gas cylinders Pin-index yoke-type valve connections
|
|
IEC 60050-826:2004
|
International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations
|
|
IEC 61965:2003
|
Mechanical safety of cathode ray tubes
|
|
ISO 5349-1:2001
|
Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements
|
|
ISO 11134:1994
|
Sterilization of health care products — Requirements for validation and routine control — Industrial moist heat sterilization
|
|
ISO 14971:2007
|
Medical devices Application of risk management to medical devices
|
|
IEC 60086-4:2014
|
Primary batteries - Part 4: Safety of lithium batteries
|
|
ISO 7000:2014
|
Graphical symbols for use on equipment Registered symbols
|
|
IEC 60317-43:1997+AMD1:2010 CSV
|
Specifications for particular types of winding wires - Part 43: Aromatic polyimide type wrapped round copper wire, class 240
|
|
IEC 61140:2016
|
Protection against electric shock - Common aspects for installation and equipment
|
|
ISO 1853:2011
|
Conducting and dissipative rubbers, vulcanized or thermoplastic Measurement of resistivity
|
|
ISO 11137:1995
|
Sterilization of health care products Requirements for validation and routine control Radiation sterilization
|
|
IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV
|
Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
|
|
IEC 60601-2-49:2011
|
Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment
|
|
IEC 61010-1:2010+AMD1:2016 CSV
|
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
|
|
IEC 60601-1-1:2000
|
Medical electrical equipment - Part 1-1: General requirements for safety - Collateral standard: Safety requirements for medical electrical systems
|
|
IEC 60445:2017
|
Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
|
|
IEC 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
|
|
IEC 60601-1-4:1996+AMD1:1999 CSV
|
Medical electrical equipment - Part 1-4: General requirements for safety - Collateral Standard: Programmable electrical medical systems
|
|
IEC 60990:2016
|
Methods of measurement of touch current and protective conductor current
|
|
ISO 5805:1997
|
Mechanical vibration and shock — Human exposure — Vocabulary
|
|
IEC 60730-1:2013+AMD1:2015 CSV
|
Automatic electrical controls - Part 1: General requirements
|
|
ISO 15223:2000
|
Medical devices Symbols to be used with medical device labels, labelling and information to be supplied
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.