Instrument transformers -- Part 1: General requirements

Amended by

UNE-EN 61869-1:2010 ERRATUM:2011

Available format(s)

Hardcopy , PDF

Language(s)

Spanish, Castilian, English

Published date

02-24-2010

Publisher

Asociacion Espanola de Normalizacion

Committee	CTN 207/SC 38
DocumentType	Standard
Pages	70
ProductNote	NEW CHILD ERR 1 IS NOW ADDED.
PublisherName	Asociacion Espanola de Normalizacion
Status	Current

Standards	Relationship
EN 61869-1:2009	Identical
IEC 61869-1:2007	Identical

EN 62262:2002	Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
IEC GUIDE 109:2012	Environmental aspects - Inclusion in electrotechnical product standards
IEC 60480:2004	Guidelines for the checking and treatment of sulfur hexafluoride (SF<sub>6</sub>) taken from electrical equipment and specification for its re-use
IEC 62271-100:2008+AMD1:2012+AMD2:2017 CSV	High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers
IEC 60255-22-1:2007	Measuring relays and protection equipment - Part 22-1: Electrical disturbance tests - 1 MHz burst immunity tests
IEC 60038:2009	IEC standard voltages
IEC 60270:2000+AMD1:2015 CSV	High-voltage test techniques - Partial discharge measurements
IEC 60565:2006	Underwater acoustics - Hydrophones - Calibration in the frequency range 0,01 Hz to 1 MHz
EN 60068-2-75:2014	Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
EN 60376:2005	Specification of technical grade sulfur hexafluoride (SF6) for use in electrical equipment
IEC 60028:1925	International standard of resistance for copper
IEC 60695-1-30:2017	Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines
IEC 62155:2003	Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V
EN 60085:2008	Electrical insulation - Thermal evaluation and designation
IEC 60695-1-1:1999	Fire hazard testing - Part 1-1: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
IEC 61161:2013	Ultrasonics - Power measurement - Radiation force balances and performance requirements
EN 62155:2003	Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V
CISPR 16-1-1:2015	Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
EN 62271-203:2012	High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
IEC 60599:2015	Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis
EN 60867:1994	Insulating liquids - Specifications for unused liquids based on synthetic aromatic hydrocarbons
IEC 60068-2-11:1981	Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist
EN 60480:2004	Guidelines for the checking and treatment of sulphur hexafluoride (SF6) taken from electrical equipment and specification for its re-use
IEC 61109:2008	Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria
IEC 60660:1999	Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 000 V up to but not including 300 kV
EN 60660:1999	Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but not including 300 kV
EN 61462:2007	Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations
IEC 60376:2005	Specification of technical grade sulfur hexafluoride (SF<sub>6</sub>) for use in electrical equipment
IEC 60567:2011	Oil-filled electrical equipment - Sampling of gases and analysis of free and dissolved gases - Guidance
HD 588.1 : S1 AMD 1	HIGH VOLTAGE TEST TECHNIQUES - GENERAL DEFINITIONS AND TEST REQUIREMENTS
HD 472 S1:1989/AC:2013	NOMINAL VOLTAGES FOR LOW-VOLTAGE PUBLIC ELECTRICITY SUPPLY SYSTEMS
EN 60270:2001/A1:2016	HIGH-VOLTAGE TEST TECHNIQUES - PARTIAL DISCHARGE MEASUREMENTS (IEC 60270:2000/A1:2015)
EN 61161:2013	Ultrasonics - Power measurement - Radiation force balances and performance requirements
EN 62271-2:2003	High-voltage switchgear and controlgear - Part 2: Seismic qualification for rated voltages of 72,5 kV and above
IEC 60694:1996+AMD1:2000+AMD2:2001 CSV	Common specifications for high-voltage switchgear and controlgear standards
IEC 60085:2007	Electrical insulation - Thermal evaluation and designation
IEC 60296:2012 RLV	Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
EN 60255-22-1:2008	Measuring relays and protection equipment - Part 22-1: Electrical disturbance tests - 1 MHz burst immunity tests
EN 60599:2016	Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis
EN 60694:1996/A2:2001	COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
EN ISO 9001:2015	Quality management systems - Requirements (ISO 9001:2015)
EN 60296:2012	Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
IEC 60121:1960	Recommendation for commercial annealed aluminium electrical conductor wire
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
IEC 61462:2007	Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations
EN 60068-2-17:1994	Environmental testing - Part 2: Tests - Test Q: Sealing
IEC 60068-2-17:1994	Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing
EN 61181:2007/A1:2012	MINERAL OIL-FILLED ELECTRICAL EQUIPMENT - APPLICATION OF DISSOLVED GAS ANALYSIS (DGA) TO FACTORY TESTS ON ELECTRICAL EQUIPMENT (IEC 61181:2007/A1:2012)
IEC 62271-203:2011	High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
IEC TR 60943:1998+AMD1:2008 CSV	Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals
EN 60695-7-1:2010	Fire hazard testing - Part 7-1: Toxicity of fire effluent - General guidance
EN 60695-1-30:2017	Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines
EN 60071-1:2006/A1:2010	INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES
EN 60565:2007	Underwater acoustics - Hydrophones - Calibration in the frequency range 0,01 Hz to 1 MHz
IEC 62262:2002	Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
IEC 60867:1993	Insulating liquids - Specifications for unused liquids based on synthetic aromatic hydrocarbons
ISO 9001:2015	Quality management systems — Requirements
IEC 60695-7-1:2010	Fire hazard testing - Part 7-1: Toxicity of fire effluent - General guidance
IEC 60071-2:1996	Insulation co-ordination - Part 2: Application guide
IEC 60721-3-3:1994+AMD1:1995+AMD2:1996 CSV	Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations
EN 60071-2:1997	Insulation co-ordination - Part 2: Application guide
IEC 60068-2-75:2014	Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
IEC 61181:2007+AMD1:2012 CSV	Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
CISPR 11:2015 RLV	Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
EN 60068-2-11:1999	Environmental testing - Part 2: Tests - Test Ka: Salt mist
EN 61109:2008	Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria
EN 60529:1991/AC:2016-12	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
IEC 60060-1:2010	High-voltage test techniques - Part 1: General definitions and test requirements
IEC 60071-1:2006+AMD1:2010 CSV	Insulation co-ordination - Part 1: Definitions, principles and rules
IEC 60664-1:2007	Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
IEC 62271-2:2003	High-voltage switchgear and controlgear - Part 2: Seismic qualification for rated voltages of 72,5 kV and above
EN 60567:2011	OIL-FILLED ELECTRICAL EQUIPMENT - SAMPLING OF GASES AND ANALYSIS OF FREE AND DISSOLVED GASES - GUIDANCE (IEC 60567:2011)
EN 55016-1-1:2010/A2:2014	SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-1: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - MEASURING APPARATUS (CISPR 16-1-1:2010/A2:2014)
ISO 3231:1993	Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide
EN 60695-1-1:2000	Fire hazard testing - Part 1-1: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
EN 60721-3-3 : 95 AMD 2 97	CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - STATIONARY USE AT WEATHER-PROTECTED LOCATIONS