IEC 60112:2003+AMD1:2009 CSV
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials
|
EN 60999-2:2003
|
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm² up to 300 mm² (included)
|
IEC 60364-5-54:2011
|
Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
|
EN 60352-2:2006/A1:2013
|
SOLDERLESS CONNECTIONS - PART 2: CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
|
IEC 60352-3:1993
|
Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance
|
IEC 60068-2-70:1995
|
Environmental testing - Part 2-70: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands
|
EN 60068-2-75:2014
|
Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
|
IEC 60364-7-712:2017
|
Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems
|
IEC 60228:2004
|
Conductors of insulated cables
|
IEC 61984:2008
|
Connectors - Safety requirements and tests
|
IEC 60352-6:1997
|
Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance
|
IEC 60068-1:2013
|
Environmental testing - Part 1: General and guidance
|
IEC 60998-2-3:2002
|
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units
|
IEC 61215:2005
|
Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval
|
IEC 60364-4-41:2005+AMD1:2017 CSV
|
Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
|
EN ISO 4892-3:2016
|
Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016)
|
EN 60352-3:1994
|
Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance
|
EN 62444 : 2013
|
CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010, MODIFIED)
|
IEC 61730-2:2016
|
Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing
|
IEC 60884-1:2002+AMD1:2006+AMD2:2013 CSV
|
Plugs and socket-outlets for household and similar purposes - Part1: General requirements
|
EN 60068-1:2014
|
Environmental testing - Part 1: General and guidance
|
IEC 60364-5-51:2005
|
Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules
|
IEC 60999-2:2003
|
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included)
|
EN 60060-1:2010
|
High-voltage test techniques - Part 1: General definitions and test requirements
|
IEC 61210:2010
|
Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
|
EN 60352-6:1997
|
Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance
|
IEC 60695-2-11:2014
|
Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
|
EN 60228:2005 COR 2005
|
CONDUCTORS OF INSULATED CABLES
|
EN 60512-1:2001
|
Connectors for electronic equipment - Tests and measurements - Part 1: General
|
IEC 60999-1:1999
|
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included)
|
EN ISO 6988:1994
|
Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture (ISO 6988:1985)
|
EN 60352-5:2012/AC:2014
|
SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE (IEC 60352-5:2012)
|
EN 60512-11-7:2003
|
Connectors for electronic equipment - Tests and measurements - Part 11- 7: Climatic tests - Test 11g: Flowing mixed gas corrosion test
|
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code)
|
ISO 4892-3:2016
|
Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps
|
IEC 60352-5:2012
|
Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance
|
IEC TR 60943:1998+AMD1:2008 CSV
|
Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals
|
IEC 61730-1:2016
|
Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction
|
IEC 60695-11-10:2013
|
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
|
IEC 60512-11-7:2003
|
Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test
|
EN 61032:1998
|
Protection of persons and equipment by enclosures - Probes for verification
|
EN 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
|
HD 60364-7-712:2016
|
Low-voltage electrical installations - Part 7-712: Requirements for special installations or locations - Photovoltaic (PV) systems
|
EN 60068-2-78:2013
|
Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
|
ISO 4892-2:2013
|
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
|
IEC 60352-2:2006+AMD1:2013 CSV
|
Solderless connections - Part 2: Crimped connections - Generalrequirements, test methods and practical guidance
|
EN 61210:2010
|
Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
|
IEC 60068-2-75:2014
|
Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
|
EN 60999-1:2000
|
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm² up to 35 mm² (included)
|
EN 61140:2016
|
Protection against electric shock - Common aspects for installation and equipment
|
EN 60352-4:1994/A1:2000
|
SOLDERLESS CONNECTIONS - PART 4: SOLDERLESS NON-ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
|
EN 61984:2009
|
Connectors - Safety requirements and tests
|
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
|
IEC 60060-1:2010
|
High-voltage test techniques - Part 1: General definitions and test requirements
|
IEC 60512-1:2001
|
Connectors for electronic equipment - Tests and measurements - Part 1: General
|
EN 60352-7:2002
|
Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance
|
IEC 61140:2016
|
Protection against electric shock - Common aspects for installation and equipment
|
IEC 61032:1997
|
Protection of persons and equipment by enclosures - Probes for verification
|
IEC 60068-2-14:2009
|
Environmental testing - Part 2-14: Tests - Test N: Change of temperature
|
IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV
|
Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
|
IEC TR 60664-2-1:2011
|
Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing
|
IEC 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
|
IEC 62444:2010
|
Cable glands for electrical installations
|
EN ISO 4892-2:2013
|
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
|
ISO 6988:1985
|
Metallic and other non organic coatings Sulfur dioxide test with general condensation of moisture
|
EN 60068-2-14:2009
|
Environmental testing - Part 2-14: Tests - Test N: Change of temperature
|
EN 61215:2005
|
Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval
|
IEC 60352-7:2002
|
Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance
|
EN 60695-2-11:2014
|
Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014)
|
EN 60309-1:1999/A1:2007/AC:2014
|
PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999/A2:2012)
|