VDI 2511:2010-02
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
04-05-2022
German - English
02-01-2010
Preliminary note
Introduction
1. Scope
2. Inspection authorisation
3. Competent persons
4. Inspection report
5. Inspection schedules
6. Liability
7. Inspection process
Annex A - Choice of analyzing and measuring
equipment, tools and appliances
Annex B - Inspection report
Annex C - Retardation for powered industrial
Trucks
Annex D - Minimum effect of parking brake
according to ISO 6292
Annex E - Braking distances for industrial
trucks with nominal load
Annex F - Braking distances for unloaded
industrial trucks
Annex G - Explanations
Bibliography
Pertains to industrial including the trailers pulled by them. Industrial trucks of a special type or with a special equipment are subject to additional regulations.
DevelopmentNote |
DRAFT 2017 issued in January 2017. (01/2017)
|
DocumentType |
Standard
|
Pages |
0
|
PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
VDI 4068 Blatt 5:2011-06 | Competent Persons - Industrial trucks, attachments, trailers |
VDI 3568:2012-10 | Measure and equipment for the maintenance of industrial trucks |
VDI 3577:2009-02 | Industrial trucks for high-bay warehouses - Specification and operating conditions |
EN 1551:2000 | Safety of industrial trucks - Self propelled trucks over 10 000 kg capacity |
ISO 611:2003 | Road vehicles Braking of automotive vehicles and their trailers Vocabulary |
DIN EN ISO 3691-2:2016-10 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SELF-PROPELLED VARIABLE-REACH TRUCKS (ISO 3691-2:2016) |
EN 1526:1997+A1:2008 | Safety of industrial trucks - Additional requirements for automated functions on trucks |
BGV D 34 : 1997 | |
ISO 5057:1993 | Industrial trucks — Inspection and repair of fork arms in service on fork-lift trucks |
EN 1726-2:2000 | Safety of Industrial Trucks - Self-propelled trucks up to and including 10000 kg capacity and tractors with a drawbar pull up to and including 20000 N - Part 2: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads |
DIN EN 15000:2009-06 | SAFETY OF INDUSTRIAL TRUCKS - SELF PROPELLED VARIABLE REACH TRUCKS - SPECIFICATION, PERFORMANCE AND TEST REQUIREMENTS FOR LONGITUDINAL LOAD MOMENT INDICATORS AND LONGITUDINAL LOAD MOMENT LIMITERS |
EN 1525:1997 | Safety of industrial trucks - Driverless trucks and their systems |
BGV D 29 : 2000 | |
EN 1726-1:1998/A1:2003 | SAFETY OF INDUSTRIAL TRUCKS - SELF-PROPELLED TRUCKS UP TO AND INCLUDING 10,000 KG CAPACITY AND INDUSTRIAL TRACTORS WITH A DRAWBAR PULL UP TO AND INCLUDING 20,000 N - PART 1: GENERAL REQUIREMENTS |
DIN EN 1551:2001-01 | SAFETY OF INDUSTRIAL TRUCKS - SELF PROPELLED TRUCKS OVER 10000 KG CAPACITY |
BGG 939 : 1996 | TEST BOOK FOR POWER-DRIVEN INDUSTRIAL TRUCKS |
EN 1757-1 : 2001 | SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 1: STACKER TRUCKS |
EN 1757-2 : 2001 | SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 2: PALLET TRUCKS |
BGV D 6 : 2000 | CRANES |
DIN EN 1175-3 : 2011 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 3: SPECIFIC REQUIREMENTS FOR THE ELECTRIC POWER TRANSMISSION SYSTEMS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS |
DIN 15170:1987-03 | Industrial trucks; trailer couplings; connecting dimensions, requirements, testing |
BGR 123 : 2005 | |
DIN EN 1757-1:2002-03 | SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 1: STACKER TRUCKS |
EN 1175-1:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks |
DIN EN ISO 3691-5:2014-07 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 5: PEDESTRIAN-PROPELLED TRUCKS (ISO 3691-5:2014) |
DIN EN 1757-2:2002-03 | SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 2: PALLET TRUCKS |
DIN EN 1175-1 : 2011 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS |
BGV D 27 : 1997 | INDUSTRIAL TRUCKS |
DIN EN 1175-2 : 2011 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 2: GENERAL REQUIREMENTS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS |
DIN EN 1525:1997-12 | SAFETY OF INDUSTRIAL TRUCKS - DRIVERLESS TRUCKS AND THEIR SYSTEMS |
DIN EN 1757-3:2003-07 | Safety of industrial trucks - Pedestrian propelled manual and semi-manual trucks - Part 3: Platform trucks |
EN 1175-2:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks |
EN 1755:2015 | Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres |
EN 1757-4 : 2003 | SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 4: SCISSOR LIFT PALLET-TRUCKS |
DIN EN ISO 3691-4:2006-05 (Draft) | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 4: DRIVERLESS INDUSTRIAL TRUCKS AND THEIR SYSTEMS |
BGR 104 : 2014 | |
VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
DIN ISO 2331:1983-04 | FORK LIFT TRUCKS, HOOK ON TYPE FORK ARMS; VOCABULARY |
DIN EN 1726-2:2001-02 | SAFETY OF INDUSTRIAL TRUCKS - SELF-PROPELLED TRUCKS UP TO AND INCLUDING 10000 KG CAPACITY AND TRACTORS WITH A DRAWBAR PULL UP TO AND INCLUDING 20000 N - PART 2: ADDITIONAL REQUIREMENTS FOR TRUCKS WITH ELEVATING OPERATOR POSITION AND TRUCKS SPECIFICALLY DESIGNED TO TRAVEL WITH ELEVATED LOADS |
EN 1757-3:2002 | Safety of industrial trucks - Pedestrian controlled manual and semi-manual trucks - Part 3: Platform trucks |
DIN 15185-1:1991-08 | Warehousesystems with guided industrial trucks; requirements on the ground, the warehouse and other requirements |
DIN EN ISO 3691-1:2015-12 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: SELF-PROPELLED INDUSTRIAL TRUCKS, OTHER THAN DRIVERLESS TRUCKS, VARIABLE-REACH TRUCKS AND BURDEN-CARRIER TRUCKS (ISO 3691-1:2011, INCLUDING COR 1:2013) |
ISO 2328:2011 | Fork-lift trucks — Hook-on type fork arms and fork arm carriages — Mounting dimensions |
VDE 0117-1 : 2011 | SICHERHEIT VON FLURFOERDERZEUGEN - ELEKTRISCHE ANFORDERUNGEN - TEIL 1: ALLGEMEINE ANFORDERUNGEN FUER FLURFOERDERZEUGE MIT BATTERIEELEKTRISCHEM ANTRIEB |
DIN EN ISO 3691-6:2014-06 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 6: BURDEN AND PERSONNEL CARRIERS (ISO 3691-6:2013) |
DIN 15185-2:2013-10 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENT - PART 2: USE IN NARROW AISLES |
ISO 6292:2008 | Powered industrial trucks and tractors Brake performance and component strength |
DIN EN ISO 3691-3:2010-02 (Draft) | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 3: ADDITIONAL REQUIREMENTS FOR TRUCKS WITH ELEVATING OPERATOR POSITION AND TRUCKS SPECIFICALLY DESIGNED TO TRAVEL WITH ELEVATED LOADS (ISO 3691-3:2016) |
ISO 2330:2002 | Fork-lift trucks — Fork arms — Technical characteristics and testing |
ZH 1/455 : 1978 | |
BGR 500 : SEP 2008 | |
DIN EN 1757-4:2003-11 | SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 4: SCISSOR LIFT PALLET-TRUCKS |
VDE 0117-2 : 2011 | SICHERHEIT VON FLURFOERDERZEUGEN - ELEKTRISCHE ANFORDERUNGEN - TEIL 2: ALLGEMEINE ANFORDERUNGEN FUER FLURFOERDERZEUGE MIT VERBRENNUNGSMOTOREN |
VDE 0117-3 : 2011 | SICHERHEIT VON FLURFOERDERZEUGEN - ELEKTRISCHE ANFORDERUNGEN - TEIL 3: BESONDERE ANFORDERUNGEN FUER ELEKTRISCHE KRAFTUEBERTRAGUNGSSYSTEME VON FLURFOERDERZEUGEN MIT VERBRENNUNGSMOTOREN |
EN 15000:2008 | Safety of industrial trucks - Self propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters |
DIN EN 1726-1 : 1999 AMD 1 2004 | SAFETY OF INDUSTRIAL TRUCKS - PART 1: SELF-PROPELLED TRUCKS UP TO AND INCLUDING 10000 KG CAPACITY AND INDUSTRIAL TRACTORS WITH A DRAWBAR PULL UP TO AND INCLUDING 20000 N |
TRGS 554 : 2008 COR 2009 | |
EN ISO 11439:2013 | Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013) |
ISO 11439:2013 | Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
BGV A 1 : 2008 | |
DIN EN 1526:2009-07 | SAFETY OF INDUSTRIAL TRUCKS - ADDITIONAL REQUIREMENTS FOR AUTOMATED FUNCTIONS ON TRUCKS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.