VDI 3986:2014-07
Current
The latest, up-to-date edition.
Hardcopy , PDF
German - English
07-01-2014
Preliminary note
1 Scope
2 Terms and definitions
3 Symbols and indices
4 Definition of efficiency
5 Reference conditions, prerequisites,
test conditions
6 Measurements to ascertain efficiency
7 Conversion to reference conditions
8 Measuring uncertainties
Bibliography
The efficiency of a power plant is a measure of how well it converts heat into electricity.
DocumentType |
Standard
|
Pages |
60
|
PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
Status |
Current
|
Supersedes |
VDI 4608 Blatt 2:2008-07 | Energy systems - Combined heat and power - Allocation and evaluation |
VDI 4608 Blatt 1:2005-03 | Energy systems - Combined heat and power - Terms, definitions, examples |
VDI 2055-3 : 2011 COR 2012 | THERMAL INSULATION OF HEATED AND REFRIGERATED OPERATIONAL INSTALLATIONS IN THE INDUSTRY AND THE BUILDING SERVICES - TECHNICAL BASICS FOR THE VERIFICATION OF THERMOTECHNICAL PROPERTIES OF INSULATION SYSTEMS, DETERMINATION OF TOTAL HEAT LOSSES |
VDI 3925 Blatt 1:2016-09 | Methods for evaluation of waste treatment processes |
VDI 4660 Blatt 2:2017-04 | Calculation of emissions related to target energy for energy conversion |
VDI 4660 Blatt 1:2013-11 | Conversion factors for specific emissions from energy-conversion systems |
VDI 3460 Blatt 2:2014-06 | Emission control - Thermal waste treatment - Energy conversion |
VDI 2048 Blatt 3:2012-05 | Uncertainties of measurement during acceptance tests on energy-conversion and power plants - Examples, especially preparation of acceptance tests of a gas and steam power plant |
VDI 4675 Blatt 1:2012-09 | Balance-based averaging of inhomogeneous flow fields - Introduction |
VDI 3986 Blatt 1:2017-01 (Draft) | Determination of the efficiency of power plants with CO-separation from flue gas |
VDI 4661:2014-08 | Energetic characteristics - Fundamentals - Methodology |
VDI/VDE 3511 Blatt 1:1996-03 | Temperature measurement in industry - Principles and special methods of temperature measurement |
DIN 4325:1971-10 | FIELD ACCEPTANCE TESTS OF STORAGE PUMPS |
DIN 51612:1980-06 | TESTING OF LIQUEFIED PETROLEUM GASES; CALCULATION OF NET CALORIFIC VALUE |
DIN 4341-2:1986-03 | GAS TURBINES; ACCEPTANCE TESTS; EXAMPLES FOR EVALUATION |
DIN 1943:1975-02 | THERMAL ACCEPTANCE TESTS OF STEAM TURBINES |
ISO 6976:2016 | Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition |
VDI/VDE 2184:2008-06 | Reliable operation and maintenance of field bus systems |
VDI/VDE 2040 Blatt 4:1996-09 (Draft) | Calculation principles for the measurement of fluid flow using orifice plates, nozzles and venturi tubes - Fluid properties |
EN 29104 : 1993 | MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - METHODS OF EVALUATING THE PERFORMANCE OF ELECTROMAGNETIC FLOW-METERS FOR LIQUIDS |
EN 14705:2005 | Heat exchangers - Method of measurement and evaluation of thermal performances of wet cooling towers |
VDI/VDE 2040 Blatt 1:1991-01 | Calculation principles for the measurement of fluid flow - Using orifice plates, nozzles and venturi tubes - Deviations and supplements to DIN 1952 |
VDI/VDE 2040 Blatt 2:1987-04 | Calculation principles for measurement of fluid flow using orifice plates, nozzles and venturi tubes; equations and formulae |
DIN EN ISO 6976:2015-06 (Draft) | NATURAL GAS - CALCULATION OF CALORIFIC VALUES, DENSITY, RELATIVE DENSITY AND WOBBE INDICES FROM COMPOSITION (ISO 6976:2016) |
VDI 2448 Blatt 2:1997-07 | Statistical evaluation of random-sample measurements of stationary source emissions: Determination of the upper confidence limit |
DIN 19216:1995-08 | FLOW MEASUREMENT - MOUNTING ARRANGEMENTS FOR FLOW MEASURING DEVICES ACCORDING TO THE DIFFERENTIAL PRESSURE METHOD |
VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
EN ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003) |
ISO 2314:2009 | Gas turbines — Acceptance tests |
DIN EN 12952-15:2004-01 | Water tube boilers and auxiliary installations - Part 15: Acceptance tests; German version EN 12952-15:2003 |
ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements |
VDI/VDE 3519 Blatt 1:2002-10 | Level measurement of liquids and solids (bulk solids) |
DIN EN ISO 9000:2015-11 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY (ISO 9000:2015) |
VDI/VDE 2600 Blatt 1:2013-10 | Inspection process management - Identification, classification and proof of suitability for inspection processes |
VDI/VDE 2040 Blatt 5:1989-03 | Calculation principles for the measurement of fluid flow using orifice plates, nozzles and venturi tubes; uncertainties |
EN 12952-15:2003 | Water-tube boilers and auxiliary installations - Part 15: Acceptance tests |
ENV 13005 : DRAFT 1999 | GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT |
IEC 60953-2:1990 | Rules for steam turbine thermal acceptance tests. Part 2: Method B - Wide range of accuracy for various types and sizes of turbines |
VDI/VDE 2040 Blatt 3:1990-05 | Calculation principles for measurement of fluid flow using orifice plates, nozzles and venturi tubes - Examples of calculations |
ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
VDI 2048 Blatt 1:2000-10 | Uncertainties of measurements at acceptance tests for energy conversion and power plants - Fundamentals |
DIN 51701-3:2006-09 | TESTING OF SOLID FUELS - SAMPLING AND SAMPLE PREPARATION - PART 3: SAMPLE PREPARATION |
DIN 51853:2011-12 | Testing of fuel gases - Sampling |
DIN 4342:1979-12 | GAS TURBINES - STANDARD REFERENCE CONDITIONS, STANDARD POWER AND PERFORMANCE DATA |
DIN 51701-4:2006-09 | TESTING OF SOLID FUELS - SAMPLING AND SAMPLE PREPARATION - PART 4: EQUIPMENT |
DIN 16160:1990-11 | THERMOMETERS - CONCEPTS |
VDI 4660 Blatt 1:2013-11 | Conversion factors for specific emissions from energy-conversion systems |
EN ISO 6976:2016 | Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016) |
VDI 2066 Blatt 1:1975-10 | Particulate matter measurement; measuring of particulate matter in flowing gases; gravimetric determination of dust load; fundamentals |
EN ISO 12213-2:2009 | Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006) |
ISO 12213-2:2006 | Natural gas Calculation of compression factor Part 2: Calculation using molar-composition analysis |
DIN EN ISO 12213-2:2010-01 | Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006) |
ISO 9104:1991 | Measurement of fluid flow in closed conduits Methods of evaluating the performance of electromagnetic flow-meters for liquids |
EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
DIN 51701-2:2006-09 | TESTING OF SOLID FUELS - SAMPLING AND SAMPLE PREPARATION - PART 2: SAMPLING |
VDI/VDE 3511 Blatt 5:1994-11 | TEMPERATURE MEASUREMENT IN INDUSTRY - INSTALLATION OF THERMOMETERS |
DIN EN ISO 5167-1:2004-01 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003) |
DIN 19200:1989-01 | METHODS OF EVALUATING THE PERFORMANCE OF ELECTROMAGNETIC FLOWMETER (EMF) FOR LIQUIDS IN CLOSED CONDUITS |
IEC 60770-1:2010 | Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.