A-A-59789 Revision B:2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR
Available format(s)
PDF
Superseded date
04-23-2021
Language(s)
English
Publisher
1. SCOPE
2. CLASSIFICATION/PART IDENTIFICATION
NUMBER (PIN)
3. SALIENT CHARACTERISTICS
4. REGULATORY REQUIREMENTS
5. PRODUCT CONFORMANCE PROVISIONS
6. PACKAGING
7. NOTES
Specifies the general requirements for a family of 5 piece wedge card holders for holding circuit card assemblies into their installed positions when used in heat sinking devices (cold plates, heat exchanger) or other applications.
| Committee |
FSC 5998
|
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy |
| A-A-59789-19 Revision B:2015 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, .250 X .270 INCH (6.35 X 6.86 MM) BODY SIZE, SHAFT MOUNTING BODY, WITH CAPTIVE REAR WEDGE, SCREW ACTUATED |
| A-A-59789-21 Revision A:2016 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, .225 X .260 INCH BODY SIZE, WEDGE MOUNTING BODY, WITH TWO OR NO MOUNTING HOLES, SCREW ACTUATED |
| A-A-59789-15 Revision C:2015 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, .365 X .375 INCH (9.27 X 9.53 MM) BODY SIZE, SHAFT MOUNTING BODY, SCREW ACTUATED |
| A-A-59789-7 Revision B:2016 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, .195 X .250 INCH BODY SIZE, SHAFT MOUNTING BODY, SCREW ACTUATED |
| A-A-59789-8 Revision B:2016 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, .195 X .250 INCH BODY SIZE, SHAFT MOUNTING BODY,SCREW ACTUATED, WITH VISUAL LOCK INDICATION |
| A-A-59789-9 Revision D:2016 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, .225 X .225 INCH BODY SIZE, SHAFT MOUNTING BODY, SCREW ACTUATED |
| A-A-59789-16 Revision C:2015 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, .365 X .375 INCH (9.27 X 9.53 MM) BODY SIZE, SHAFT MOUNTING BODY, WITH VISUAL LOCK INDICATION, SCREW ACTUATED |
| A-A-59789-4 Revision B:2015 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, .225 X .225 INCH BODY SIZE, WEDGE MOUNTING BODY, WITH TWO MOUNTING HOLES, VISUAL LOCK INDICATION, AND SCREW ACTUATION AND RETENTION |
| A-A-59789-1 Revision B:2015 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, .225 X .260 INCH BODY SIZE, WEDGE MOUNTING BODY, WITH TWO MOUNTING HOLES, SCREW ACTUATION AND RETENTION |
| A-A-59789-5 Revision B:2016 | HOLDERS, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, LEVER ACTUATED, WEDGE MOUNTING BODY, WITH VISUAL LOCK INDICATION |
| A-A-59789-23 Revision A:2017 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, .225 X .225 INCH BODY SIZE, WEDGE MOUNTING BODY, WITH TWO, THREE, OR FOUR MOUNTING HOLES, SCREW ACTUATED, 7.0 INCH THROUGH 8.5 INCH ASSEMBLY LENGTH |
| A-A-59789-13 Revision A:2013 | Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .375 X .375 Inch Body Size, Wedge Mounting Body,with Two Mounting Holes and Screw Retention, Screw Actuated |
| A-A-59789-11 Revision C:2022 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, .375 X .375 INCH BODY SIZE, WEDGE MOUNTING BODY, WITH TWO MOUNTING HOLES, SCREW ACTUATED |
| A-A-59789-17 Revision B:2017 | Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .250 X .290 Inch (6.35 x 7.37 mm) Body Size, Shaft Mounting Body, with Captive Rear Wedge, Screw Actuated |
| A-A-59789-18 Revision B:2017 | Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .250 X .290 Inch (6.35 x 7.37 mm) Body Size, Shaft Mounting Body, with Captive Rear Wedge and Visual Lock Indication, Screw Actuated |
| A-A-59789-12 Revision B:2017 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, .375 X .375 INCH BODY SIZE, WEDGE MOUNTING BODY, WITH TWO MOUNTING HOLES AND VISUAL LOCK INDICATION, SCREW ACTUATED |
| A-A-59789-26 Revision A:2017 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, .225 X .225 INCH BODY SIZE, SHAFT MOUNTING BODY, SCREW ACTUATED, WITH CAPTIVE SCREW AND VISUAL LOCK INDICATION |
| A-A-59789-22 Revision A:2016 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, .225 X .260 INCH BODY SIZE, WEDGE MOUNTING BODY, WITH TWO OR NO MOUNTING HOLES AND VISUAL LOCK INDICATION, SCREW ACTUATED |
| A-A-59789-25 Revision A:2017 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, .225 X .225 INCH BODY SIZE, SHAFT MOUNTING BODY, SCREW ACTUATED, WITH CAPTIVE SCREW |
| A-A-59789-3 Revision B:2015 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, .225 X .225 INCH BODY SIZE, WEDGE MOUNTING BODY, WITH TWO MOUNTING HOLES, WITH SCREW ACTUATION AND RETENTION |
| A-A-59789-2 Revision B:2015 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, .225 X .260 INCH BODY SIZE, WEDGE MOUNTING BODY, WITH TWO MOUNTING HOLES AND VISUAL LOCK INDICATION, WITH SCREW ACTUATION AND RETENTION |
| A-A-59789-6 Revision B:2016 | HOLDERS, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, LEVER ACTUATED, SHAFT MOUNTING BODY, WITH LEVER EXTRACTION AND VISUAL LOCK INDICATION |
| A-A-59789-20 Revision B:2015 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, .250 X .270 INCH (6.35 X 6.86 MM) BODY SIZE, SHAFT MOUNTING BODY, WITH CAPTIVE REAR WEDGE AND VISUAL LOCK INDICATION, SCREW ACTUATED |
| A-A-59789-14 Revision A:2013 | Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, .375 X .375 Inch Body Size, Wedge Mounting Body, with Two Mounting Holes, Visual Lock Indication, and Screw Retention, Screw Actuated |
| MIL-HDBK-1861 Revision B:2013 | Selection and Use1 of Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware |
| A-A-59789-24 Revision A:2017 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, .225 X .225 INCH BODY SIZE, WEDGE MOUNTING BODY, WITH TWO, THREE, OR FOUR MOUNTING HOLES AND VISUAL LOCK INDICATION, SCREW ACTUATED, 7.0 INCH THROUGH 8.5 INCH ASSEMBLY LENGTH |
| A-A-59789-10 Revision D:2016 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, .225 X .225 INCH BODY SIZE, SHAFT MOUNTING BODY, SCREW ACTUATED, WITH VISUAL LOCK INDICATION |
| MIL-DTL-5002 Revision E:2011 | SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS |
| NAS620:2013 | WASHER, FLAT, REDUCED OUTSIDE DIAMETER |
| SAE AMS QQ A 200/8 : 2015 | ALUMINUM ALLOY 6061, BAR, ROD, SHAPES, TUBE, AND WIRE, EXTRUDED A96061 |
| SAE AMS QQ N 290 : 2015 | NICKEL PLATING (ELECTRODEPOSITED) |
| ASTM B 221 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
| NASM 21043 : 2003 | NUT, SELF-LOCKING, 800 DEGREES F, REDUCED HEXAGON, REDUCED HEIGHT, RING BASE, CRES |
| SAE AMS 5904 : 2012 | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 18CR - 9.0NI (SAE 30302), COLD ROLLED, 1/2 HARD, 150 KSI (1034 MPA) TENSILE STRENGTH |
| NAS1283:2014 | FASTENERS, MALE THREADED, SELF-LOCKING |
| MIL-DTL-5541 Revision F:2006 | Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
| SAE AMS QQ S 763D : 2013(S2015) | STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS |
| NAS1676:2015 | WASHER, LOCK, SPRING, HELICAL, HI-COLLAR |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| ASTM B 194 : 2015 : REDLINE | Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar |
| SAE AMS 2700E : 2011 | PASSIVATION OF CORROSION RESISTANT STEELS |
| MIL-DTL-18240 Revision F:1997 | FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250 DEGREES F MAXIMUM |
| NASM35338:2013 | WASHER, LOCK-SPRING, HELICAL, REGULAR (MEDIUM) SERIES |
| SAE AMS C 26074 : 2013 | ELECTROLESS NICKEL COATINGS |
| MIL-PRF-46010 Revision H:2013 | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE S-1738 |
US$20.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.