ANSI/ASA S1.1:2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
ACOUSTICAL TERMINOLOGY
Available format(s)
Hardcopy , PDF
Superseded date
06-02-2020
Language(s)
English
Published date
10-14-2013
Publisher
1 Scope
2 General
3 Levels
4 Oscillation, vibration, and shock
5 Transmission and propagation
6 Transducers and linear systems
7 Acoustical apparatus and instruments
8 Underwater acoustics
9 Sonics and ultrasonic testing
10 Architectural acoustics
11 Physiological and psychological acoustics
12 Musical acoustics
Bibliography
Index
Gives definitions for terms used in acoustics and electroacoustics. Also gives a number of general terms from the fields of architectural acoustics, engineering acoustics, physical acoustics, physiological and psychological acoustics, sonics and ultrasonics, underwater sound, and music.
| Committee |
S1
|
| DocumentType |
Standard
|
| Pages |
86
|
| PublisherName |
Acoustical Society of America
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ANSI S3.28 : 86 DRAFT | EVALUATION OF THE POTENTIAL EFFECT ON HUMAN HEARING OF SOUNDS WITH PEAK-A-WEIGHTED SOUND PRESSURE LEVELS ABOVE 120 DECIBELS AND PEAK-C-WEIGHTED SOUND PRESSURE LEVELS BELOW 140 DECIBELS, |
| 10/30216184 DC : 0 | BS EN 62271-113 ED1 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 113: STANDARD PRACTICE FOR THE MEASUREMENT OF SOUND PRESSURE LEVELS OF OUTDOOR CIRCUIT BREAKERS |
| ANSI B71.5 : 1984 | OPERATOR-EAR SOUND PRESSURE LEVEL - MEASUREMENT AND RATING PROCEDURE FOR POWERED LAWN, GARDEN, AND SNOW REMOVAL EQUIPMENT |
| BS ISO 18405:2017 | Underwater acoustics. Terminology |
| ANSI S1.43 : 1997 | SPECIFICATIONS FOR INTEGRATING-AVERAGING SOUND LEVEL METERS |
| BS IEC 62271-37-082 : 2012 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 37-082: STANDARD PRACTICE FOR THE MEASUREMENT OF SOUND PRESSURE LEVELS ON ALTERNATING CURRENT CIRCUIT-BREAKERS |
| IEEE 661 : 1979 | METHOD FOR DETERMINING OBJECTIVE LOUDNESS RATINGS OF TELEPHONE CONNECTIONS |
| SAE J 1637 : 2013 | LABORATORY MEASUREMENT OF THE COMPOSITE VIBRATION DAMPING PROPERTIES OF MATERIALS ON A SUPPORTING STEEL BAR |
| MIL-HDBK-1908 Revision B:1999 | Definitions of Human Factors Terms |
| ANSI S12 PT6 : 2016 | METHODS FOR MEASURING THE REAL-EAR ATTENUATION OF HEARING PROTECTORS |
| ISO/PAS 17208-1:2012 | Acoustics Quantities and procedures for description and measurement of underwater sound from ships Part 1: General requirements for measurements in deep water |
| SAE J 2005 : 2011 | STATIONARY SOUND LEVEL MEASUREMENT PROCEDURE FOR RECREATIONAL MOTORBOATS |
| MIL-HDBK-1473 Revision A:1997 | Color and Marking of Army Materiel |
| ANSI S1.17-1 : 2014 | MICROPHONE WINDSCREENS - PART 1: TEST PROCEDURES FOR MEASUREMENTS OF INSERTION LOSS IN STILL AIR |
| AHAM AC2 : 2006 | METHOD FOR SOUND TESTING OF PORTABLE HOUSEHOLD ELECTRIC ROOM AIR CLEANERS STANDARD |
| ANSI S12.8 : 1998 : R2008 | METHODS FOR DETERMINING THE INSERTION LOSS OF OUTDOOR NOISE BARRIERS |
| ANSI S12.64-1 : 2009 | QUANTITIES AND PROCEDURES FOR DESCRIPTION AND MEASUREMENT OF UNDERWATER SOUND FROM SHIPS - PART 1: GENERAL REQUIREMENTS |
| SAE J 34 : 2011 | EXTERIOR SOUND LEVEL MEASUREMENT PROCEDURE FOR RECREATIONAL MOTORBOATS |
| ANSI S12.43 : 1997 : R2007 | METHODS FOR MEASUREMENT OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS |
| ANSI S1.15-1 : 1997 : R2011 | MEASUREMENT MICROPHONES - PART 1: SPECIFICATIONS FOR LABORATORY STANDARD MICROPHONES |
| ANSI/ASA S12.7 : 1986(R2015) | METHODS FOR MEASUREMENT OF IMPULSE NOISE |
| ANSI/ASA S3.46 : 2013 | American National Standard Methods of Measurement of Real-Ear Performance Characteristics of Hearing Aids |
| ANSI S12.9 PT5 : 2007 : R2012 | QUANTITIES AND PROCEDURES FOR DESCRIPTION AND MEASUREMENT OF ENVIRONMENTAL SOUND - PART 5: SOUND LEVEL DESCRIPTORS FOR DETERMINATION OF COMPATIBLE LAND USE |
| ANSI S2.2 : 1959 : R2011 | METHODS FOR THE CALIBRATION OF SHOCK AND VIBRATION PICKUPS |
| ANSI/ASA S3.22:2014 | SPECIFICATION OF HEARING AID CHARACTERISTICS |
| ANSI/ASA S1.15 PART 2 : 2005(R2015) | MEASUREMENT MICROPHONES - PART 2: PRIMARY METHOD FOR PRESSURE CALIBRATION OF LABORATORY STANDARD MICROPHONES BY THE RECIPROCITY TECHNIQUE |
| ANSI S12.65 : 2006 | RATING NOISE WITH RESPECT TO SPEECH INTERFERENCE |
| ANSI S3.47 : 2014 | SPECIFICATION OF PERFORMANCE MEASUREMENT OF HEARING ASSISTANCE DEVICES/SYSTEMS |
| ANSI S12.19 : 1996 : R2011 | MEASUREMENT OF OCCUPATIONAL NOISE EXPOSURE |
| ANSI B93.72M : 86(R1996) | HYDRAULIC FLUID POWER - MOTORS - TEST CODE FOR THE DETERMINATION OF AIRBORNE NOISE LEVELS |
| SAE J 1174 : 2015 | OPERATOR EAR SOUND LEVEL MEASUREMENT PROCEDURE FOR SMALL ENGINE POWERED EQUIPMENT |
| ASTM E 2202 : 2002 : R2009 | Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards |
| ASTM E 2202 : 2002 | Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards |
| DEFSTAN 61-14(PT7)/1(1990) : 1990 | PRECISION INSTRUMENT, ROTATING, SERVOCOMPONENTS - PART 7: INSTALLATION CONVENTIONS |
| MIL-A-52767 Revision D:1989 | AIR CONDITIONER: VERTICAL AND HORIZONTAL, COMPACT |
| ANSI S12-2 : 2008 | CRITERIA FOR EVALUATING ROOM NOISE |
| ANSI S12.60 : 0 | ACOUSTICAL PERFORMANCE CRITERIA, DESIGN REQUIREMENTS, AND GUIDELINES FOR SCHOOLS |
| DEFSTAN 61-14(PT5)/1(1985) : 1985 | PRECISION INSTRUMENT, ROTATING, SERVO-COMPONENTS - PART 5: MOTORS, STEPPING, D.C. |
| MIL-STD-1365 Revision C:2010 | GENERAL DESIGN CRITERIA FOR HANDLING EQUIPMENT ASSOCIATED WITH WEAPONS AND RELATED ITEMS |
| DEFSTAN 61-14(PT2)/2(1990) : 1990 | PRECISION INSTRUMENT, ROTATING, SERVOCOMPONENTS - PART 2: MOTORS, CONTROL AC (SERVOMOTORS, TWO-PHASE INDUCTION) |
| DEFSTAN 61-14(PT9)/1(1988) : 1988 | PRECISION INSTRUMENT, ROTATING, SERVOCOMPONENTS - PART 9: MOTORS, TORQUE, D.C. |
| DEFSTAN 61-14(PT10)/1(1989) : 1989 | PRECISION INSTRUMENT, ROTATING, SERVO-COMPONENTS - PART 10: GEARHEADS |
| SAE J1161 : 2017 | OPERATIONAL SOUND LEVEL MEASUREMENT PROCEDURE FOR SNOWMOBILES |
| ANSI S12.19 : 1996 : R2006 | MEASUREMENT OF OCCUPATIONAL NOISE EXPOSURE |
| SAE J 184 : 2014 | QUALIFYING A SOUND DATA ACQUISITION SYSTEM |
| ASA TR S12.13:2002(R2016) | EVALUATING THE EFFECTIVENESS OF HEARING CONSERVATION PROGRAMS THROUGH AUDIOMETRIC DATA BASE ANALYSIS |
| ANSI S2.34 : 1984 : R2010 | GUIDE TO THE EXPERIMENTAL DETERMINATION OF ROTATIONAL MOBILITY PROPERTIES AND THE COMPLETE MOBILITY MATRIX |
| ANSI S12.9 PT4 : 2005 | QUANTITIES AND PROCEDURES FOR DESCRIPTION AND MEASUREMENT OF ENVIRONMENTAL SOUND - PART 4: NOISE ASSESSMENT AND PREDICTION OF LONG-TERM COMMUNITY RESPONSE |
| ANSI S2.31 : 1979 : R2009 | METHODS FOR THE EXPERIMENTAL DETERMINATION OF MECHANICAL MOBILITY - PART 1: BASIC DEFINITIONS AND TRANSDUCERS |
| ANSI S1.18 : 2010 | METHOD FOR DETERMINING THE ACOUSTIC IMPEDANCE OF GROUND SURFACES |
| SAE J 1400 : 2017 | LABORATORY MEASUREMENT OF THE AIRBORNE SOUND BARRIER PERFORMANCE OF FLAT MATERIALS AND ASSEMBLIES |
| SAE J 247 : 2013 | PROCEDURE AND INSTRUMENTATION FOR MEASURING ACOUSTIC IMPULSES FROM DEPLOYMENT OF AUTOMOTIVE INFLATABLE DEVICES |
| SAE AIR 1826 : 2016 | ACOUSTICAL CONSIDERATIONS FOR AIRCRAFT ENVIRONMENTAL CONTROL SYSTEM DESIGN |
| AASHTO TP 76 : 2015 | METHOD OF TEST FOR MEASUREMENT OF TIRE/PAVEMENT NOISE USING THE ON-BOARD SOUND INTENSITY (OBSI) METHOD |
| ANSI S12.44 : 1997 : R2012 | METHODS FOR CALCULATION OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS FROM SOUND POWER LEVEL |
| ANSI/ASA S2.31:1979 (R2014) | METHODS FOR THE EXPERIMENTAL DETERMINATION OF MECHANICAL MOBILITY - PART 1: BASIC DEFINITIONS AND TRANSDUCERS |
| ASTM E 1686 : 2016 : REDLINE | Standard Guide for Applying Environmental Noise Measurement Methods and Criteria |
| ANSI S1.16 : 2000 : R2005 | METHOD FOR MEASURING THE PERFORMANCE OF NOISE DISCRIMINATING AND NOISE CANCELING MICROPHONES |
| ANSI/ASA S12.72 : 2015 | PROCEDURE FOR MEASURING THE AMBIENT NOISE LEVEL IN A ROOM |
| SAE ARP 1801 : 2012 | MEASUREMENT OF EXTERIOR SOUND LEVEL OF SPECIALIZED AIRCRAFT GROUND SUPPORT EQUIPMENT |
| ASTM E 2202 : 2002 : R2016 | Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards |
| NEMA SG 4:2009(R2013) | ALTERNATING CURRENT HIGH-VOLTAGE CIRCUIT BREAKERS |
| MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
| IEEE 260.4-1996 | American National Standard Letter Symbols and Abbreviations for Quantities Used in Acoustics |
| ANSI S12.13 : 2002 : R2011 | EVALUATING THE EFFECTIVENESS OF HEARING CONSERVATION PROGRAMS THROUGH AUDIOMETRIC DATA BASE ANALYSIS |
| ANSI S12.7 : 1986 | METHODS FOR MEASUREMENT OF IMPULSE NOISE |
| ANSI/ASA S1.8 : 2016 | REFERENCE VALUES FOR LEVELS USED IN ACOUSTICS AND VIBRATIONS |
| BS IEC/IEEE 62271-37-082:2012 | High-voltage switchgear and controlgear Standard practice for the measurement of sound pressure levels on alternating current circuit-breakers |
| ISA 37.10 : 1982 | SPECIFICATIONS AND TESTS FOR PIEZOELECTRIC PRESSURE AND SOUND PRESSURE TRANSDUCERS |
| ANSI S12.44 : 1997 | METHODS FOR CALCULATION OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS FROM SOUND POWER LEVEL |
| ANSI S3.1 : 1999 : R2003 | MAXIMUM PERMISSIBLE AMBIENT NOISE LEVELS FOR AUDIOMETRIC TEST ROOMS |
| ANSI S12.69 : 2010 | PROCEDURE FOR TESTING RAILROAD HORNS EX SITU |
| ANSI S3.6 : 2010 | SPECIFICATION FOR AUDIOMETERS |
| ANSI B93.71M : 86(R1996) | HYDRAULIC FLUID POWER - PUMPS - TEST CODE FOR THE DETERMINATION OF AIRBORNE NOISE LEVELS |
| ANSI S12.17 : 1996 : R2011 | IMPULSE SOUND PROPAGATION FOR ENVIRONMENTAL NOISE ASSESSMENT |
| ANSI S12.67 : 2008 | PRE-INSTALLATION AIRBORNE SOUND MEASUREMENTS AND ACCEPTANCE CRITERIA OF SHIPBOARD EQUIPMENT |
| ANSI S12.14 : 1992 : R2007 | METHODS FOR THE FIELD MEASUREMENT OF THE SOUND OUTPUT OF AUDIBLE PUBLIC WARNING DEVICES INSTALLED AT FIXED LOCATIONS OUTDOORS |
| SAE ARP 1398 : 2016 | TESTING OF OXYGEN EQUIPMENT |
| MIL-STD-1660 Revision A:2008 | DESIGN CRITERIA STANDARD - AMMUNITION UNIT LOADS |
| MIL-STD-1294 Revision A:1985 | ACOUSTICAL NOISE LIMITS IN HELICOPTERS |
| SAE J 1175 : 1985 | BYSTANDER SOUND LEVEL MEASUREMENT PROCEDURE FOR SMALL ENGINE POWERED EQUIPMENT |
| SAE AIR 6297 : 2017 | METHOD TO CALCULATE BEHIND START OF TAKEOFF ROLL NOISE LEVEL ADJUSTMENTS |
| SAE J 2883 : 2015 | LABORATORY MEASUREMENT OF RANDOM INCIDENCE SOUND ABSORPTION TESTS USING A SMALL REVERBERATION ROOM |
| CEA 2051 : 2017 | PERSONAL SOUND AMPLIFICATION PERFORMANCE CRITERIA |
| SAE J 2846 : 2017 | LABORATORY MEASUREMENT OF THE ACOUSTICAL PERFORMANCE OF BODY CAVITY FILLER MATERIALS |
| ANSI/ASA S2.8 : 2007 : INC : ERR 1 : 2013 : R2017 | TECHNICAL INFORMATION USED FOR RESILIENT MOUNTING APPLICATIONS |
| CSA Z107.56 : 2013 | MEASUREMENT OF NOISE EXPOSURE |
| ANSI S1.15-2 : 2005 : R2010 | MEASUREMENT MICROPHONES - PART 2: PRIMARY METHOD FOR PRESSURE CALIBRATION OF LABORATORY STANDARD MICROPHONES BY THE RECIPROCITY TECHNIQUE |
| ANSI S12.64-1 : 2009 : R2014 | QUANTITIES AND PROCEDURES FOR DESCRIPTION AND MEASUREMENT OF UNDERWATER SOUND FROM SHIPS - PART 1: GENERAL REQUIREMENTS |
| EG 202 396-3 : 1.5.1 | SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); SPEECH QUALITY PERFORMANCE IN THE PRESENCE OF BACKGROUND NOISE; PART 3: BACKGROUND NOISE TRANSMISSION - OBJECTIVE TEST METHODS |
| ANSI/ASA S12.70 : 2016 | CRITERIA FOR EVALUATING SPEECH PRIVACY IN HEALTHCARE FACILITIES |
| ASA/ANSI S12.44:1997(R2020) | METHODS FOR CALCULATION OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS FROM SOUND POWER LEVEL |
| NASA STD 3000 VOL 2 : 1995 | MAN-SYSTEMS INTEGRATION STANDARDS - VOLUME 2 |
| ANSI S12.60-1 : 2010 | ACOUSTICAL PERFORMANCE CRITERIA, DESIGN REQUIREMENTS, AND GUIDELINES FOR SCHOOLS - PART 1: PERMANENT SCHOOLS |
| ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
| SAE ARP 1307 : 2013 | MEASUREMENT OF EXTERIOR NOISE PRODUCED BY AIRCRAFT AUXILIARY POWER UNITS (APUS) AND ASSOCIATED EQUIPMENT DURING GROUND OPERATION |
| ANSI S12.13 : 2002 : R2010 | EVALUATING THE EFFECTIVENESS OF HEARING CONSERVATION PROGRAMS THROUGH AUDIOMETRIC DATA BASE ANALYSIS |
| ANSI/ASA S2.32 : 1982(R2014) | METHODS FOR THE EXPERIMENTAL DETERMINATION OF MECHANICAL MOBILITY - PART 2: MEASUREMENTS USING SINGLE-POINT TRANSLATION EXCITATION |
| ANSI S3.1 : 1999 : R2013 | MAXIMUM PERMISSIBLE AMBIENT NOISE LEVELS FOR AUDIOMETRIC TEST ROOMS |
| ANSI/ASA S12.9 PART 7 : 2016 | QUANTITIES AND PROCEDURES FOR DESCRIPTION AND MEASUREMENT OF ENVIRONMENTAL SOUND - PART 7: MEASUREMENT OF LOW-FREQUENCY NOISE AND INFRASOUND OUTDOORS AND IN THE PRESENCE OF WIND AND INDOORS IN OCCUPIED SPACES |
| ANSI S2.17 : 0 | TECHNIQUES OF MACHINERY VIBRATION MEASUREMENT |
| SAE J 192 : 2013 | MAXIMUM EXTERIOR SOUND LEVEL FOR SNOWMOBILES |
| ANSI/ASA S12.65 : 2006(R2011) | RATING NOISE WITH RESPECT TO SPEECH INTERFERENCE |
| ANSI S2.8 : 2007 : INC : ERR 1 : 2013 : R201200 | TECHNICAL INFORMATION USED FOR RESILIENT MOUNTING APPLICATIONS |
| IEEE 269-2010 REDLINE | IEEE Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets |
| ANSI S12.60-2 : 2009 | ACOUSTICAL PERFORMANCE CRITERIA, DESIGN REQUIREMENTS, AND GUIDELINES FOR SCHOOLS - PART 2: RELOCATABLE CLASSROOM FACTORS |
| SAE J 1160 : 2004 | OPERATOR EAR SOUND LEVEL MEASUREMENT PROCEDURE FOR SNOW VEHICLES |
| SAE J 1970 : 2018 | SHORELINE SOUND LEVEL MEASUREMENT PROCEDURE FOR RECREATIONAL MOTORBOATS |
| IEEE 539-2005 | IEEE Standard Definitions of Terms Relating to Corona and Field Effects of Overhead Power Lines |
| ISO 18405:2017 | Underwater acoustics — Terminology |
| ANSI S12.7 : 1986 : R2006 | METHODS FOR MEASUREMENT OF IMPULSE NOISE |
| ASHRAE 87.1 : 1992 | METHOD OF TESTING FAN VIBRATION - BLADE VIBRATIONS AND CRITICAL SPEEDS |
| ANSI/ASA S12.44 : 1997(R2017) | METHODS FOR CALCULATION OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS FROM SOUND POWER LEVEL |
| ANSI S1.15-1 : 1997 | MEASUREMENT MICROPHONES - PART 1: SPECIFICATIONS FOR LABORATORY STANDARD MICROPHONES |
| ANSI/ASA S1.6 : 2016 | PREFERRED FREQUENCIES AND FILTER BAND CENTER FREQUENCIES FOR ACOUSTICAL MEASUREMENTS |
| ANSI S3.35 : 2010 | METHOD OF MEASUREMENT OF PERFORMANCE CHARACTERISTICS OF HEARING AIDS UNDER SIMULATED REAL-EAR WORKING CONDITIONS |
| ANSI/ASA S2.34 : 1984(R2015) | GUIDE TO THE EXPERIMENTAL DETERMINATION OF ROTATIONAL MOBILITY PROPERTIES AND THE COMPLETE MOBILITY MATRIX |
| ANSI S12.76 : 2017 | METHODS FOR MEASUREMENT OF SUPERSONIC JET NOISE FROM UNINSTALLED MILITARY AIRCRAFT ENGINES |
| ANSI/ASA S12.14 : 1992(R2012) | METHODS FOR THE FIELD MEASUREMENT OF THE SOUND OUTPUT OF AUDIBLE PUBLIC WARNING DEVICES INSTALLED AT FIXED LOCATIONS OUTDOORS |
| ANSI S12.43 : 1997 : R2012 | METHODS FOR MEASUREMENT OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS |
| ANSI/ASA S12.42 : 2010 | METHODS FOR THE MEASUREMENT OF INSERTION LOSS OF HEARING PROTECTION DEVICES IN CONTINUOUS OR IMPULSIVE NOISE USING MICROPHONE-IN-REAL-EAR OR ACOUSTIC TEST FIXTURE PROCEDURES |
| MIL-STD-1474 Revision E:2015 | NOISE LIMITS |
| 15/30274135 DC : 0 | BS ISO 18405 - UNDERWATER ACOUSTICS - TERMINOLOGY |
| ASHRAE 87.2 : 2009 | IN-SITU METHOD OF TESTING PROPELLER FANS FOR RELIABILITY |
| MIL-STD-912 Base Document:1990 | PHYSICAL EAR NOISE ATTENUATION TESTING |
| ANSI/ASA S3.20 : 2015 | American National Standard Bioacoustical Terminology |
| ANSI S12.9 PT6 : 2008 | QUANTITIES AND PROCEDURES FOR DESCRIPTION AND MEASUREMENT OF ENVIRONMENTAL SOUND - PART 6: METHODS FOR ESTIMATION OF AWAKENINGS ASSOCIATED WITH OUTDOOR NOISE EVENTS HEARD IN HOMES |
| CSA Z107.56 : 2013:R2018 | MEASUREMENT OF NOISE EXPOSURE |
| ANSI S2.8:2007 | TECHNICAL INFORMATION USED FOR RESILIENT MOUNTING APPLICATIONS |
| ANSI S3.1 : 1999 : R2008 | MAXIMUM PERMISSIBLE AMBIENT NOISE LEVELS FOR AUDIOMETRIC TEST ROOMS |
| CSA Z94.2 : 2014 | HEARING PROTECTION DEVICES - PERFORMANCE, SELECTION, CARE, AND USE |
| PD ISO/PAS 17208-1:2012 | Acoustics. Quantities and procedures for description and measurement of underwater sound from ships General requirements for measurements in deep water |
| MIL-STD-167-1 Revision A:2005 | MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (TYPE 1 - ENVIRONMENTAL AND TYPE 2 - INTERNALLY EXCITED) |
| ANSI S1.9 : 1996 | INSTRUMENTS FOR THE MEASUREMENT OF SOUND INTENSITY |
| ANSI/ASA S3.35 : 2010(R2015) | METHOD OF MEASUREMENT OF PERFORMANCE CHARACTERISTICS OF HEARING AIDS UNDER SIMULATED REAL-EAR WORKING CONDITIONS |
| IEEE 2400-2016 | IEEE Standard for Wind Turbine Aero Acoustic Noise Measurement Techniques |
| ANSI/ASA S2.4 : 1976(R2014) | METHODS FOR SPECIFYING THE CHARACTERISTICS OF AUXILIARY ANALOG EQUIPMENT FOR SHOCK AND VIBRATION MEASUREMENTS |
| ANSI S2.40 : 0 | MECHANICAL VIBRATION OF ROTATING AND RECIPROCATING MACHINERY - REQUIREMENTS FOR MEASURING VIBRATION SEVERITY |
| MIL-S-008806 Revision B:1970 | SOUND PRESSURE LEVELS IN AIRCRAFT, GENERAL SPECIFICATION FOR |
| ANSI S2.32 : 1982 : R2009 | METHODS FOR THE EXPERIMENTAL DETERMINATION OF MECHANICAL MOBILITY - PART 2: MEASUREMENTS USING SINGLE-POINT TRANSLATION EXCITATION |
| IEEE C37.082-1982 | IEEE Standard Methods for the Measurement of Sound Pressure Levels of AC Power Circuit Breakers |
| IEEE 1206-1994 | IEEE Standard Methods for Measuring Transmission Performance of Telephone Handsets and Headsets |
| ANSI S1.15-2 : 2005 | MEASUREMENT MICROPHONES - PART 2: PRIMARY METHOD FOR PRESSURE CALIBRATION OF LABORATORY STANDARD MICROPHONES BY THE RECIPROCITY TECHNIQUE |
| ANSI S12.13 : 2002 | EVALUATING THE EFFECTIVENESS OF HEARING CONSERVATION PROGRAMS THROUGH AUDIOMETRIC DATA BASE ANALYSIS |
| ANSI S1.40 : 2006 | SPECIFICATIONS AND VERIFICATION PROCEDURES FOR SOUND CALIBRATORS |
| ANSI/ASA S2.2 : 1959(R2016) | METHODS FOR THE CALIBRATION OF SHOCK AND VIBRATION PICKUPS |
| ANSI/ASA S1.20 : 2012 | American National Standard Procedures for Calibration of Underwater Electroacoustic Transducers |
| ANSI S3.39 : 1987 : R2007 | SPECIFICATIONS FOR INSTRUMENTS TO MEASURE AURAL ACOUSTIC IMPEDANCE AND ADMITTANCE (AURAL ACOUSTIC IMMITTANCE) |
| ANSI S12.9 PT5 : 2007 | QUANTITIES AND PROCEDURES FOR DESCRIPTION AND MEASUREMENT OF ENVIRONMENTAL SOUND - PART 5: SOUND LEVEL DESCRIPTORS FOR DETERMINATION OF COMPATIBLE LAND USE |
| ANSI S1.40 : 2006 : R2011 | SPECIFICATIONS AND VERIFICATION PROCEDURES FOR SOUND CALIBRATORS |
| ANSI S2.2:1959(R2006) | METHODS FOR THE CALIBRATION OF SHOCK AND VIBRATION PICKUPS |
| ANSI/ASA S3/SC1.100-2014 | METHODS TO DEFINE AND MEASURE THE RESIDUAL SOUND IN PROTECTED NATURAL AND QUIET RESIDENTIAL AREAS |
| ANSI/ASA S12.8 : 1998(R2013) | METHODS FOR DETERMINING THE INSERTION LOSS OF OUTDOOR NOISE BARRIERS |
| ANSI S2.4 : 1976 : R2004 | METHODS FOR SPECIFYING THE CHARACTERISTICS OF AUXILIARY ANALOG EQUIPMENT FOR SHOCK AND VIBRATION MEASUREMENTS |
| ANSI/ASA S3.39 : 1987(R2012) | SPECIFICATIONS FOR INSTRUMENTS TO MEASURE AURAL ACOUSTIC IMPEDANCE AND ADMITTANCE (AURAL ACOUSTIC IMMITTANCE) |
| ANSI S1.15-1 : 1997 : R2006 | MEASUREMENT MICROPHONES - PART 1: SPECIFICATIONS FOR LABORATORY STANDARD MICROPHONES |
| ANSI S12.17 : 1996 : R2006 | IMPULSE SOUND PROPAGATION FOR ENVIRONMENTAL NOISE ASSESSMENT |
| ANSI S1.11 : 2014 | SPECIFICATION FOR OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND ANALOG AND DIGITAL FILTERS |
| ANSI S12.44 : 1997 : R2007 | METHODS FOR CALCULATION OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS FROM SOUND POWER LEVEL |
| ANSI/ASA S12.43 : 1997 (R2017) | METHODS FOR MEASUREMENT OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS |
| ANSI S3.44 : 2016 | DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE AND ESTIMATION OF NOISE-INDUCED HEARING IMPAIRMENT |
| ASA/ANSI TR S12.13:2002(R2020) | EVALUATING THE EFFECTIVENESS OF HEARING CONSERVATION PROGRAMS THROUGH AUDIOMETRIC DATA BASE ANALYSIS |
| ASME PTC36 : 2004 : R2013 | PERFORMANCE TEST CODES - MEASUREMENT OF INDUSTRIAL SOUND |
| ASME PTC36 : 2004 | PERFORMANCE TEST CODES - MEASUREMENT OF INDUSTRIAL SOUND |
| ANSI S1.11 : 2014 | SPECIFICATION FOR OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND ANALOG AND DIGITAL FILTERS |
| ANSI/ASA S3.20 : 2015 | American National Standard Bioacoustical Terminology |
| IEC 60050-802:2011 | International Electrotechnical Vocabulary (IEV) - Part 802: Ultrasonics |
| ANSI S12.9 PT1 : 2013 | QUANTITIES AND PROCEDURES FOR DESCRIPTION AND MEASUREMENT OF ENVIRONMENTAL SOUND - PART 1: BASIC QUANTITIES AND DEFINITIONS |
| IEC 60050-801:1994 | International Electrotechnical Vocabulary (IEV) - Part 801: Acoustics and electroacoustics |
| ISO 2041:2009 | Mechanical vibration, shock and condition monitoring Vocabulary |
| ISO 1925:2001 | Mechanical vibration Balancing Vocabulary |
| ANSI/ASA S1.8 : 2016 | REFERENCE VALUES FOR LEVELS USED IN ACOUSTICS AND VIBRATIONS |
| IEEE 260.4-1996 | American National Standard Letter Symbols and Abbreviations for Quantities Used in Acoustics |
| ISO 5805:1997 | Mechanical vibration and shock — Human exposure — Vocabulary |
US$211.20
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English - DRM
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.