IEEE/ANSI C63.19-2011 REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
American National Standard Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids
Available format(s)
PDF
Superseded date
08-06-2021
Language(s)
English
Published date
05-27-2011
1. Overview
2. Normative references
3. Definitions, acronyms, and abbreviations
4. Evaluation for low-power exemption
5. Wireless device, RF emissions test
6. Hearing aid RF near-field immunity test
7. Wireless device T-Coil signal test
8. Performance criteria
9. Calibration and measurement uncertainty
10. Test report
Annex A (normative) - Definition of reference axes
Annex B (normative) - Test frequencies
Annex C (normative) - Equipment and setup calibration
Annex D (normative) - Test equipment specifications
Annex E (informative) - Sample measurement uncertainty
estimates
Annex F (informative) - Use of Helmholtz coils for
calibration
Annex G (informative) - Limits in linear units
Annex H (informative) - U.S. Frequency bands
Annex I (informative) - RF envelope comparison for
U.S. WD systems
Annex J (informative) - Explanation of rationale used
in this standard
Annex K (informative) - Bibliography
Pertains to both wireless communications devices (WDs) and hearing aids. It sets forth uniform methods of measurement and parametric requirements for the electromagnetic and operational compatibility and accessibility of hearing aids used with WDs, including cordless, cellular, personal communications service (PCS) phones, and voice over internet protocol (VoIP) devices, operating in the range of 698 MHz to 6 GHz.
| DevelopmentNote |
Supersedes IEEE DRAFT C63.19. (01/2009)
|
| DocumentType |
Standard
|
| Pages |
140
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| IEEE DRAFT 1309 : D2.0 2005 | CALIBRATION OF ELECTROMAGNETIC FIELD SENSORS AND PROBES, EXCLUDING ANTENNAS, FROM 9 KHZ TO 40 GHZ |
| I.S. EN 301549:2015 | ACCESSIBILITY REQUIREMENTS SUITABLE FOR PUBLIC PROCUREMENT OF ICT PRODUCTS AND SERVICES IN EUROPE |
| BS ISO/IEC 29136:2012 | Information technology. User interfaces. Accessibility of personal computer hardware |
| 13/30280284 DC : 0 | BS EN 301549 - ACCESSIBILITY REQUIREMENTS FOR PUBLIC PROCUREMENT OF ICT PRODUCTS AND SERVICES IN EUROPE |
| 08/30177361 DC : DRAFT JAN 2008 | BS IEC 60118-13 - ELECTRO ACOUSTICS - HEARING AIDS - PART 13: ELECTROMAGNETIC COMPATIBILITY (EMC) |
| 07/30161929 DC : 0 | BS EN 60118-13 - ELECTROACOUSTICS - HEARING AIDS - PART 13: ELECTROMAGNETIC COMPATIBILITY (EMC) |
| CSA ISO/IEC 29136:14 (R2019) | Information technology - User interfaces - Accessibility of personal computer hardware (Adopted ISO/IEC 29136:2012, first edition, 2012-05-01) |
| EN 61000-4-20:2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES |
| ES 200 381-2 : 1.1.1 | TELEPHONY FOR HEARING IMPAIRED PEOPLE; INDUCTIVE COUPLING OF TELEPHONE EARPHONES TO HEARING AIDS; PART 2: CELLULAR SPEECH TERMINALS |
| BS EN 61000-4-20:2003 | Electromagnetic Compatibility (EMC) Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
| CEI EN 60118-13 : 2012 | ELECTROACOUSTICS - HEARING AIDS - PART 13: ELECTROMAGNETIC COMPATIBILITY (EMC) |
| BS EN 301549:2015 | Accessibility requirements suitable for public procurement of ICT products and services in Europe |
| AAMI TIR18:2010 | GUIDANCE ON ELECTROMAGNETIC COMPATIBILITY OF MEDICAL DEVICES IN HEALTHCARE FACILITIES |
| EN 60118-13:2011 | Electroacoustics - Hearing aids - Part 13: Electromagnetic compatibility (EMC) |
| CEI EN 61000-4-20 : 2013 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES |
| TR 101 550 : 1.1.1 | DOCUMENTS RELEVANT TO EN 301 549 'ACCESSIBILITY REQUIREMENTS SUITABLE FOR PUBLIC PROCUREMENT OF ICT PRODUCTS AND SERVICES IN EUROPE' |
| TR 102 612 : 1.1.1 | HUMAN FACTORS (HF); EUROPEAN ACCESSIBILITY REQUIREMENTS FOR PUBLIC PROCUREMENT OF PRODUCTS AND SERVICES IN THE ICT DOMAIN (EUROPEAN COMMISSION MANDATE M 376, PHASE 1) |
| UNE-EN 60118-13:2012 | Electroacoustics - Hearing aids - Part 13: Electromagnetic compatibility (EMC) |
| EN 301 549 : 1.1.2 | ACCESSIBILITY REQUIREMENTS SUITABLE FOR PUBLIC PROCUREMENT OF ICT PRODUCTS AND SERVICES IN EUROPE |
| I.S. EN 60118-13:2011 | ELECTROACOUSTICS - HEARING AIDS - PART 13: ELECTROMAGNETIC COMPATIBILITY (EMC) |
| IEEE 1309-2013 REDLINE | IEEE Standard for Calibration of Electromagnetic Field Sensors and Probes (Excluding Antennas) from 9 kHz to 40 GHz |
| 12/30264287 DC : 0 | BS EN 60118-13 ED.4 - ELECTROACOUSTICS - HEARING AIDS - PART 13: ELECTROMAGNETIC COMPATABILITY (EMC) (REVISION OF IEC 60118-13: 2011) |
| 00/203722 DC : DRAFT AUG 2000 | IEC 60118-13. ED.2 - HEARING AIDS - PART 13: ELECTROMAGNETIC COMPATIBILITY (EMC) - PRODUCT STANDARD |
| ES 200 381-1 : 1.2.1 | TELEPHONY FOR HEARING IMPAIRED PEOPLE; INDUCTIVE COUPLING OF TELEPHONE EARPHONES TO HEARING AIDS; PART 1: FIXED-LINE SPEECH TERMINALS |
| ISO/IEC 29136:2012 | Information technology User interfaces Accessibility of personal computer hardware |
| S.R. CEN/CLC/ETSI TR 101550:2014 | DOCUMENTS RELEVANT TO EN 301 549 'ACCESSIBILITY REQUIREMENTS SUITABLE FOR PUBLIC PROCUREMENT OF ICT PRODUCTS AND SERVICES IN EUROPE' |
| I.S. EN 61000-4-20:2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES |
| UNE-EN 61000-4-20:2011 | Electromagnetic compatibility (EMC) -- Part 4-20: Testing and measurement techniques - Emission and immunity testing in Transverse Electromagnetic (TEM) waveguides - Basic EMC publication |
| IEC 61000-4-20:2010 | Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
| IEC 60118-13:2016 | Electroacoustics - Hearing aids - Part 13: Electromagnetic compatibility (EMC) |
| BS EN 60118-13:2011 | Electroacoustics. Hearing aids Electromagnetic compatibility (EMC) |
| IEEE/ANSI C63.27-2017 | American National Standard for Evaluation of Wireless Coexistence |
| IEEE/ANSI C63.9-2008 | American National Standard for RF Immunity of Audio Office Equipment to General Use Transmitting Devices with Transmitter Power Levels up to 8 Watts |
| IEEE/ANSI C63.14-2014 REDLINE | American National Standard Dictionary of Electromagnetic Compatibility (EMC) including Electromagnetic Environmental Effects (E3) |
| IEEE/ANSI C63.26-2015 | IEEE/ANSI Standard for Compliance Testing of Transmitters Used in Licensed Radio Services |
| TIA/EIA 136 SET : H2011 | TDMA THIRD GENERATION WIRELESS |
| IEC 60318-4:2010 | Electroacoustics - Simulators of human head and ear - Part 4: Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts |
| IEEE 661 : 1979 | METHOD FOR DETERMINING OBJECTIVE LOUDNESS RATINGS OF TELEPHONE CONNECTIONS |
| IEC 60118-7:2005 | Electroacoustics - Hearing aids - Part 7: Measurement of the performance characteristics of hearing aids for production, supply and delivery quality assurance purposes |
| CISPR 16-4-2:2011+AMD1:2014 CSV | Specification for radio disturbance and immunity measuring apparatusand methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty |
| IEEE 299-2006 | IEEE Standard Method for Measuring the Effectiveness of Electromagnetic Shielding Enclosures |
| IEC 60318-3:2014 | Electroacoustics - Simulators of human head and ear - Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry |
| IEC 60118-1:1995+AMD1:1998 CSV | Hearing aids - Part 1: Hearing aids with induction pick-up coil input |
| ANSI S1.4 : 1983 | SPECIFICATION FOR SOUND LEVEL METERS |
| IEC 61094-4:1995 | Measurement microphones - Part 4: Specifications for working standard microphones |
| SAE J 551/1 : 2015 | PERFORMANCE LEVELS AND METHODS OF MEASUREMENT OF ELECTROMAGNETIC COMPATIBILITY OF VEHICLES, BOATS (UP TO 15 M), AND MACHINES (16.6 HZ TO 18 GHZ) |
| ISO 266:1997 | Acoustics — Preferred frequencies |
| IEC 60118-13:2016 | Electroacoustics - Hearing aids - Part 13: Electromagnetic compatibility (EMC) |
| IEC 61094-1:2000 | Measurement microphones - Part 1: Specifications for laboratory standard microphones |
| ETSI GSM 05.90 : 4.3.0 | |
| IEEE 1309-2013 REDLINE | IEEE Standard for Calibration of Electromagnetic Field Sensors and Probes (Excluding Antennas) from 9 kHz to 40 GHz |
| IEEE/ANSI C63.14-2009 | American National Standard Dictionary of Electromagnetic Compatibility (EMC) including Electromagnetic Environmental Effects (E3) |
| ISO 3:1973 | Preferred numbers Series of preferred numbers |
| CISPR TR 16-4-3:2004+AMD1:2006 CSV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-3: Uncertainties, statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced products |
| CFR 47(PTS40-69) : OCT 2017 | TELECOMMUNICATIONS - FEDERAL COMMUNICATIONS COMMISSION |
| IEC 61094-3:2016 | Electroacoustics - Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique |
| IEEE C95.3-2002 | IEEE Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields With Respect to Human Exposure to Such Fields, 100 kHz-300 GHz |
| IEC 60318-5:2006 | Electroacoustics - Simulators of human head and ear - Part 5: 2 cm<sup>3</sup> coupler for the measurement of hearing aids and earphones coupled to the ear by means of ear inserts |
| IEC 60318-2:1998 | Electroacoustics - Simulators of human head and ear - Part 2: An interim acoustic coupler for the calibration of audiometric earphones in the extended high-frequency range |
| IEEE/ANSI C63.14-2014 REDLINE | American National Standard Dictionary of Electromagnetic Compatibility (EMC) including Electromagnetic Environmental Effects (E3) |
| IEC 61000-4-20:2010 | Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| IEEE C95.1-2005 | IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz |
| TIA 1083 : B2015 | TELECOMMUNICATIONS COMMUNICATIONS PRODUCTS HANDSET MAGNETIC MEASUREMENT PROCEDURES AND PERFORMANCE REQUIREMENTS |
| IEC 61094-2:2009 | Electroacoustics - Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique |
| IEEE 1128-1998 | IEEE Recommended Practice for Radio-Frequency (RF) Absorber Evaluation in the Range of 30 MHz to 5 GHz |
| CFR 47(PTS20-39) : OCT 2017 | TELECOMMUNICATIONS - FEDERAL COMMUNICATIONS COMMISSION |
| TIA/EIA TSB 31 : D2011 ADD 4 2016 | TELECOMMUNICATIONS TELEPHONE TERMINAL EQUIPMENT RATIONALE AND MEASUREMENT GUIDELINES FOR U.S. NETWORK PROTECTION |
| IEEE/ANSI C63.4-2001 | American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz |
| CISPR TR 16-4-4:2007 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits for the protection of radio services |
| ANSI/ASA S3.22:2014 | SPECIFICATION OF HEARING AID CHARACTERISTICS |
| IEC 60118-4:2014+AMD1:2017 CSV | Electroacoustics - Hearing aids - Part 4: Induction-loop systems for hearing aid purposes - System performance requirements |
| IEC 60118-0:2015 | Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids |
| IEC 60318-1:2009 | Electroacoustics - Simulators of human head and ear - Part 1: Ear simulator for the measurement of supra-aural and circumaural earphones |
| CFR 47(PTS80-END) : OCT 2017 | TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION |
| IEEE 269-2010 REDLINE | IEEE Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets |
| TIA 2000 SERIES : F | INTRODUCTION TO CDMA2000 SPREAD SPECTRUM SYSTEMS |
| TIA/EIA/IS 91 : 1999 | BASE STATION - MOBILE STATION COMPATIBILITY SPECIFICATION FOR 800 MHZ CELLULAR, AUXILIARY, AND RESIDENTIAL SERVICES |
US$294.62
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.