• There are no items in your cart

API 14FZ : 2013

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS
Available format(s)

Hardcopy , PDF

Superseded date

04-24-2020

Language(s)

English

Published date

05-01-2013

1 General
2 Normative References
3 Acronyms, Terms, and Definitions
4 Electrical Equipment for Hazardous (Classified) Locations
5 Electric Power Generating Stations
6 Electrical Distribution Systems
7 Electric Motors
8 Transformers
9 Lighting
10 Battery-powered DC Supply Systems
11 Special Systems
12 Special Considerations
13 System Checkout
14 Maintenance
15 Safety
Annex A (informative) - Inspection Intervals
Annex B (informative) - ABS Rules For Building and Classing
        Steel Vessels - 1998, PART 4
Annex C (informative) - USCG Requirements, 46 CFR,
        Subchapter J, 111.95
Annex D (informative) - USCG Requirements, 46 CFR,
        Subchapter J, 111.97
Annex E (informative) - USCG Requirements, 46 CFR,
        Subchapter J, Subpart 111.105
Annex F (informative) - Electrical Inspection Checklist

Provides minimum requirements and guidelines for the design, installation, and maintenance of electrical systems on fixed and floating petroleum facilities located offshore.

DocumentType
Standard
Pages
188
PublisherName
American Petroleum Institute
Status
Superseded
SupersededBy
Supersedes

API RP 75:2004 RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES
IEEE 1242-1999 IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants
API RP 14C : 2017 ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES
API 14G : 2007 RECOMMENDED PRACTICE FOR FIRE PREVENTION AND CONTROL ON FIXED OPEN-TYPE OFFSHORE PRODUCTION PLATFORMS
API 75 : 2004 : R2013 RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES
C22.1-15 PACKAGE Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference
API 14G :2007(R2013) RECOMMENDED PRACTICE FOR FIRE PREVENTION AND CONTROL ON FIXED OPEN-TYPE OFFSHORE PRODUCTION PLATFORMS
C22.1HB-18 Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
API 14F : 2008 : R2013 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
API 75 : 2019 RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES
IEEE 45.8-2016 IEEE Recommended Practice for Electrical Installations on Shipboard--Cable Systems
API 75 CHINESE : 2004 : R2008 RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES
ABS 0057 : 2017 COR 2017 GUIDE FOR THE CLASSIFICATION OF DRILLING SYSTEMS
API 14F:2008 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
IEEE 1717-2012 IEEE Standard for Testing Circuit Integrity Cables Using a Hydrocarbon Pool Fire Test Protocol
API RP 75 CHINESE : 2004 RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES
ABS 0063 : 2018 COR 2018 RULES FOR BUILDING AND CLASSING FACILITIES ON OFFSHORE INSTALLATIONS
IEEE 45.1-2017 IEEE Recommended Practice for Electrical Installations on Shipboard--Design
IEEE 1349-2011 REDLINE IEEE Guide for Application of Electric Motors in Class I, Division 2 and Class I, Zone 2 Hazardous (Classified) Locations
ISA RP12.12.03 : 2002 PORTABLE ELECTRONIC PRODUCTS SUITABLE FOR USE IN CLASS 1 AND 2, DIVISION 2, CLASS 1 ZONE 2 AND CLASS 3, DIVISION 1 AND 2 HAZARDOUS (CLASSIFIED) LOCATIONS
API 14F REDLINE : 2008 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
C22.1-18 Canadian Electrical Code, Part I (24th Edition), Safety Standard for Electrical Installations
IEEE 1810-2017 IEEE Guide for the Installation of Fire-Rated Cables Suitable for Hydrocarbon Pool Fires for Critical and Emergency Shutdown Systems in Petroleum and Chemical Industries

IEEE C37.12-2008 SPECIFICATION GUIDE FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS BASED ON A SYMMETRICAL CURRENT BASIS
NFPA 91 : 2015 EXHAUST SYSTEMS FOR AIR CONVEYING OF VAPORS, GASES, MISTS, AND PARTICULATE SOLIDS
IEC 62271-100:2008+AMD1:2012+AMD2:2017 CSV High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers
CFR 33(PTS125-199) : JUL 2017 NAVIGATION AND NAVIGABLE WATERS
ISA 60079-7 : 2008 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY "E"
IEEE 1566-2015 REDLINE IEEE Standard for Performance of Adjustable-Speed AC Drives Rated 375 kW and Larger
IEC 60079-10:2002 Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
IEEE C37.14-2015 REDLINE IEEE Standard for DC (3200 V and below) Power Circuit Breakers Used in Enclosures
IEEE C37.102-2006 REDLINE IEEE Guide for AC Generator Protection
CFR 46(PTS41-69) : OCT 2017 SHIPPING - COAST GUARD, DEPARTMENT OF TRANSPORTATION
IEEE C37.20.1-2015 REDLINE IEEE Standard for Metal-Enclosed Low-Voltage (1000 Vac and below, 3200 Vdc and below) Power Circuit Breaker Switchgear
IEEE 1202-2006 IEEE Standard for Flame-Propagation Testing of Wire & Cable
CFR 46(PTS90-139) : OCT 2017 SHIPPING - COAST GUARD, DEPARTMENT OF TRANSPORTATION
IEC 61158-2:2014 Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition
CSA C22.2 No. 157 : 1992 INTRINSICALLY SAFE AND NON-INCENDIVE EQUIPMENT FOR USE IN HAZARDOUS LOCATIONS
LR R&R CLASS.MOBILE OFFSH.UNITS-FULL SET : NOTICE 1 RULES AND REGULATIONS FOR THE CLASSIFICATION OF MOBILE OFFSHORE UNITS - FULL SET
API 500 : 2012 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2
NEMA WC 74 : 2012 5-46 KV SHIELDED POWER CABLE FOR USE IN THE TRANSMISSION AND DISTRIBUTION OF ELECTRIC ENERGY
ASME A17.5 : 2014 ELEVATOR AND ESCALATOR ELECTRICAL EQUIPMENT
ISA 12.01.01 : 2009 DEFINITIONS AND INFORMATION PERTAINING TO ELECTRICAL EQUIPMENT IN HAZARDOUS (CLASSIFIED) LOCATIONS
IEC 62271-200:2011 High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
FAA AC 150/5390-2 : 2004 HELIPORT DESIGN
UL 514A:11ED 2013-02 Metallic Outlet Boxes
NEMA MG 1 : 2016 MOTORS AND GENERATORS
UL 50:13ED 2015-10 Enclosures for Electrical Equipment, Non-Environmental Considerations
NEMA MG 2:2014 Safety Standard for Construction and Guide for Selection, Installation and Use of Electric Motors and Generators
C22.1-15 Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations
NFPA 780 : 2017 INSTALLATION OF LIGHTNING PROTECTION SYSTEMS
UL 1072:4ED 2006-06 Medium-Voltage Power Cables
CFR 29(PTS1900-1910) : 0 LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
NEMA MG 10:2017 Energy Management Guide for Selection and Use of Fixed Frequency Medium AC Squirrel-Cage Polyphase Induction Motors
IEC 61779-6:1999 Electrical apparatus for the detection and measurement of flammable gases - Part 6: Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
API RP 14C : 2017 ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES
ISA 12.12.01 : 2007 NONINCENDIVE ELECTRICAL EQUIPMENT FOR USE IN CLASS 1 AND 2, DIVISION 2 AND CLASS 3, DIVISIONS 1 AND 2 HAZARDOUS (CLASSIFIED) LOCATIONS
ISA TR12.24.01 : 1998 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS CLASSIFIED AS CLASS 1, ZONE 0, ZONE 1, OR ZONE 2
NEMA WC 70 : 2009 POWER CABLES RATED 2000 VOLTS OR LESS FOR THE DISTRIBUTION OF ELECTRICAL ENERGY
ISA RP92.0.02-2 : 1998 INSTALLATION, OPERATION, AND MAINTENANCE OF TOXIC GAS-DETECTION INSTRUMENTS: HYDROGEN SULFIDE
API 546 : 2008 BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER
IEC 60331-11:1999+AMD1:2009 CSV Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C
IEEE 841-2009 IEEE Standard for Petroleum and Chemical Industry--Premium-Efficiency, Severe-Duty, Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors--Up to and Including 370 kW (500 hp)
NFPA 101 : 2018 LIFE SAFETY CODE
IMO IE110 : 2009 SOLAS (CONSOLIDATED EDITION)
IEEE C37.20.2-2015 IEEE Standard for Metal-Clad Switchgear
NFPA 70B : 2016 RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE
IEEE/ANSI Y32.9-1972 American National Standard Graphic Symbols for Electrical Wiring and Layout Diagrams Used in Architecture and Building Construction
NEMA 250 : 2014 ENCLOSURES FOR ELECTRICAL EQUIPMENT (1000 VOLTS MAXIMUM)
NEMA ICS 6-1993 (R2006) Industrial Control and Systems: Enclosures
UL 83:16ED 2017-07 Standard for Thermoplastic-Insulated Wires and Cables
NFPA 90A : 2018 INSTALLATION OF AIR-CONDITIONING AND VENTILATING SYSTEMS
UL 1008:8ED 2014-12 Transfer Switch Equipment
NFPA 69 : 2014 EXPLOSION PREVENTION SYSTEMS
NEMA ICS 2.1 : 1990
API 2003 : 2015 PROTECTION AGAINST IGNITIONS ARISING OUT OF STATIC, LIGHTNING, AND STRAY CURRENTS
ISA 60079-1 : 2005 EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES "D"
NACE SP 01 76 : 2007 CORROSION CONTROL OF SUBMERGED AREAS OF PERMANENTLY INSTALLED STEEL OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION
NFPA 496 : 2017 PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT
IEC 61779-2:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 2: Performance requirements for group I apparatus indicating a volume fraction up to 5 % methane in air
ISA 60079-2 : 2010(R2015) EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURES 'P'
ICEA P 32 382 : 2007(R2018) SHORT CIRCUIT CHARACTERISTICS OF INSULATED CABLES
IEEE/ASTM SI_10-2010 American National Standard for Metric Practice
NEMA VE 2 : 2013 CABLE TRAY INSTALLATION GUIDELINES
IEC 60050-426:2008 International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres
ISA RP12.12.03 : 2002 PORTABLE ELECTRONIC PRODUCTS SUITABLE FOR USE IN CLASS 1 AND 2, DIVISION 2, CLASS 1 ZONE 2 AND CLASS 3, DIVISION 1 AND 2 HAZARDOUS (CLASSIFIED) LOCATIONS
ISA 60079-18 : 2005 EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION "M"
UL 514C:4ED 2014-04 Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers
IEEE 315 : 1975 GRAPHIC SYMBOLS FOR ELECTRICAL AND ELECTRONICS DIAGRAMS (INCLUDING REFERENCE DESIGNATION LETTERS)
NFPA ELEC INSTALLATIONS IN HAZ LOCATIONS : 2008 ELECTRICAL INSTALLATIONS IN HAZARDOUS LOCATIONS
NEMA FG 1:1993 FIBERGLASS CABLE TRAY SYSTEMS
IEEE 835-1994 IEEE Standard Power Cable Ampacity Tables
ISA 60079-11 : 2002 EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY 'I'
IEC 61779-4:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating up to 100% lower explosive limit
IEEE 242 : 2001 PROTECTION AND COORDINATION OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
ISA 60079-6 : 1998 EXPLOSIVE ATMOSPHERES - PART 6: EQUIPMENT PROTECTION BY OIL-IMMERSION 'O'
UL 1309:3ED 2017-04 Marine Shipboard Cable
IEEE C37.010-1999 IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
NEMA VE 1:2017 Metal Cable Tray Systems
IEEE C37.13-2015 REDLINE IEEE Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures
ISA 12.13.01 : 2003 PERFORMANCE REQUIREMENTS FOR COMBUSTIBLE GAS DETECTORS
UL 2196:2ED 2017-08 Fire Test for Circuit Integrity of Fire-Resistive Power, Instrumentation, Control and Data Cables
ANSI C84.1 : 2016 ELECTRIC POWER SYSTEMS AND EQUIPMENT - VOLTAGE RATINGS (60 HERTZ)
ASTM D 4066 : 2013 Standard Classification System for Nylon Injection and Extrusion Materials (PA)
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
LR R&R CLASS.FIXED OFFSH.INST.- FULL SET : NOTICE 10 RULES AND REGULATIONS FOR THE CLASSIFICATION OF FIXED OFFSHORE INSTALLATIONS - FULL SET
IES HB 10 : 2011 THE LIGHTING HANDBOOK
ISA TR12.21.01 : 2004 USE OF FIBER OPTIC SYSTEMS IN CLASS 1 HAZARDOUS (CLASSIFIED) LOCATIONS
UL 1203:5ED 2013-11 ExplosionProof and Dust-IgnitionProof Electrical Equipment for Use in Hazardous (Classified) Locations
NFPA 70E : 2018 ELECTRICAL SAFETY IN THE WORKPLACE
API 505 : 1997 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2
IEEE 484-2002 IEEE Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary Applications
NFPA 99 : 2018 HEALTH CARE FACILITIES CODE
IEEE 142 : 2007 GROUNDING OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
IEEE C37.06-2009 AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS - PREFERRED RATINGS AND RELATED REQUIRED CAPABILITIES
IEEE 1100 : 2005 POWERING AND GROUNDING ELECTRONIC EQUIPMENT
IEC 60331-21:1999 Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV
NFPA FIRE PROT GUIDE ON HAZARDOUS MAT : 2010 FIRE PROTECTION GUIDE TO HAZARDOUS MATERIALS
IEC 60533:2015 Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull
FAA AC 70-7460-1 : 2015 OBSTRUCTION MARKING AND LIGHTING
IEC 61779-3:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 3: Performance requirements for group I apparatus indicating a volume fraction up to 100 % methane in air
IEEE C37.04A : 2003 RATING STRUCTURE FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS - AMENDMENT 1: CAPACITANCE CURRENT SWITCHING
IEEE 450-2010 REDLINE IEEE Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary Applications
CFR 33(PTS1-124) : JUL 2017 NAVIGATION AND NAVIGABLE WATERS
NEMA ICS 2.4 : 2003(R2012) INDUSTRIAL CONTROL AND SYSTEMS: NEMA AND IEC DEVICES FOR MOTOR SERVICE - A GUIDE FOR UNDERSTANDING THE DIFFERENCES
LR R&R CLASS.FLOAT.OFFSHORE INS.FULL SET : NOTICE 4 RULES AND REGULATIONS FOR THE CLASSIFICATION OF A FLOATING OFFSHORE INSTALLATION AT A FIXED LOCATION - FULL SET
IES RP 1 : 2004 PRACTICE FOR OFFICE LIGHTING
NEMA ICS 1 : 2000(R2015) INDUSTRIAL CONTROL AND SYSTEMS: GENERAL REQUIREMENTS
ISA 12.27.01 : 2003 REQUIREMENTS FOR PROCESS SEALING BETWEEN ELECTRICAL SYSTEMS AND FLAMMABLE OR COMBUSTIBLE PROCESS FLUIDS
ISA 12.20.01 : 2009(R2014) GENERAL REQUIREMENTS FOR ELECTRICAL IGNITION SYSTEMS FOR INTERNAL COMBUSTION ENGINES IN CLASS 1, DIVISION 2 OR ZONE 2, HAZARDOUS (CLASSIFIED) LOCATIONS
API STD 541 : 2014 FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER
IP 15 : 2015 PETROLEUM PRODUCTS - DETERMINATION OF POUR POINT
API SPEC 17E : 2017 SPECIFICATION FOR SUBSEA UMBILICALS
IEEE C37.27-2008 REDLINE IEEE Application Guide for Low-Voltage AC Power Circuit Breakers Applied with Separately-Mounted Current-Limiting Fuses
NFPA 30 : 2018 FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE
ISA RP12.13.02 : 2003 INSTALLATION, OPERATION, AND MAINTENANCE OF COMBUSTIBLE GAS DETECTION INSTRUMENTS
UL 13:4ED 2015-03 Power-Limited Circuit Cables
IEC 61779-5:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 5: Performance requirements for group II apparatus indicating a volume fraction up to 100 % gas
NFPA 77 : 2014 STATIC ELECTRICITY
UL 783:6ED 2003-04 Electric Flashlights and Lanterns for Use in Hazardous (Classified) Locations
UL 2250:3ED 2017-03 Instrumentation Tray Cable
CFR 49(PTS178-199) : OCT 2017 TRANSPORTATION
IEEE C57.12.70-2011 IEEE Standard for Standard Terminal Markings and Connections for Distribution and Power Transformers
CFR 29(PT1926) : 0 LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR - SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION
NFPA 54 : 2018 NATIONAL FUEL GAS CODE
CFR 30(PTS200-699) : JUL 2017 MINERAL RESOURCES - DEPARTMENT OF THE INTERIOR
NFPA 37 : 2018 INSTALLATION AND USE OF STATIONARY COMBUSTION ENGINES AND GAS TURBINES
IEC 60947-2:2016 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
NEMA ICS 2.3 : 1995(R2008) INDUSTRIAL CONTROL AND SYSTEMS: INSTRUCTIONS FOR THE HANDLING, INSTALLATION, OPERATION AND MAINTENANCE OF MOTOR CONTROL CENTERS
ISA 12.10.05 : 2004 ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - CLASSIFICATION OF ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS
IEEE 1242-1999 IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants
IEEE 515-2011 IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Industrial Applications
API 547 : 2017 GENERAL PURPOSE FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 185 KW (250 HP) THROUGH 2240 KW (3000 HP)
ISA 60079-0 : 2005 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
IEC 61779-1:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 1: General requirements and test methods
ISA 51.1 : 1979 PROCESS INSTRUMENTATION TERMINOLOGY
ANSI/NEMA WC 71/ICEA S-96-659:2014 Standard for Nonshielded Cables Rated 2001-5000 V for Use in the Distribution of Electric Energy
ISA TR12.06.01 : 1999 ELECTRICAL EQUIPMENT IN A CLASS 1, DIVISION 2/ZONE 2 HAZARDOUS LOCATION
UL 515:2ED 2015-07 Standard for Electrical Resistance Trace Heating for Commercial Applications
ISA 5.1 : 1984 INSTRUMENTATION SYMBOLS AND IDENTIFICATION
IEC 60068-2-52:2017 Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
ASME A17.1 : 2016 SAFETY CODE FOR ELEVATORS AND ESCALATORS - INCLUDES REQUIREMENTS FOR ELEVATORS, ESCALATORS, DUMBWAITERS, MOVING WALKS, MATERIAL LIFTS, AND DUMBWAITERS WITH AUTOMATIC TRANSFER DEVICES
IEEE 485-2010 IEEE Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications
ISA 92.00.01 : 2010(R2015) PERFORMANCE REQUIREMENTS FOR TOXIC GAS DETECTORS
NFPA 20 : 2016 INSTALLATION OF STATIONARY PUMPS FOR FIRE PROTECTION
IEEE 141 : 1993 IEEE Recommended Practice for Electric Power Distribution for Industrial Plants
API 2218 : 2013 FIREPROOFING PRACTICES IN PETROLEUM AND PETROCHEMICAL PROCESSING PLANTS
ISA RP12.06.01 : 2003 RECOMMENDED PRACTICE FOR WIRING METHODS FOR HAZARDOUS (CLASSIFIED) LOCATIONS INSTRUMENTATION - PART 1: INTRINSIC SAFETY
IEEE 303-2004 IEEE Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations
IEC 61241-10:2004 Electrical apparatus for use in the presence of combustible dust - Part 10: Classification of areas where combustible dusts are or may be present
ISA 60079-15 : 2003 EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION "N"
NFPA 497 : 2017 CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS
CSA PLUS 2203 : 2001 HAZARDOUS LOCATIONS - GUIDE FOR THE DESIGN, TESTING, CONSTRUCTION, AND INSTALLATION OF EQUIPMENT IN EXPLOSIVE ATMOSPHERES

View more information
US$326.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.