|
IEC 60270:2000+AMD1:2015 CSV
|
High-voltage test techniques - Partial discharge measurements |
|
IEC TS 60479-1:2005+AMD1:2016 CSV
|
Effects of current on human beings and livestock - Part 1: Generalaspects |
|
ASTM D 892 : 2013-07
|
TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS |
|
IEC 60228:2004
|
Conductors of insulated cables |
|
EI GUIDE MGMT. OBSOLESCENCE SUBSEA : 1ED 2011
|
GUIDELINES FOR THE MANAGEMENT OF OBSOLESCENCE IN SUBSEA FACILITIES |
|
ISO 9606-2:2004
|
Qualification test of welders Fusion welding Part 2: Aluminium and aluminium alloys |
|
NORSOK M 001:2014
|
MATERIALS SELECTION |
|
ISO/TR 10949:2002
|
Hydraulic fluid power Component cleanliness Guidelines for achieving and controlling cleanliness of components from manufacture to installation |
|
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION)
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST |
|
ASME PV CODE 9 : 2017
|
BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
|
ASTM D 665 : 2014-11
|
TEST METHOD FOR RUST-PREVENTING CHARACTERISTICS OF INHIBITED MINERAL OIL IN THE PRESENCE OF WATER |
|
ISO 15610:2003
|
Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables |
|
ASTM D 1141 : 1998 : EDT 1
|
Standard Practice for the Preparation of Substitute Ocean Water |
|
ASTM D 1414 : 2015 : REDLINE
|
Standard Test Methods for Rubber O-Rings |
|
IEC 60502-1:2004+AMD1:2009 CSV
|
Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV(Um = 36 kV) - Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV) |
|
ASME PV CODE 8 DIV 1 : 2017
|
BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
|
API 6A : 2010
|
SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
|
IEEE 802.3-2012
|
ETHERNET - CORRIGENDUM 1: MULTI-LANE TIMESTAMPING |
|
TIA/EIA 568-2 : C2009 AMD 1 2016
|
COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 2: BALANCED TWISTED-PAIR TELECOMMUNICATIONS CABLING AND COMPONENTS STANDARDS |
|
IEC TS 62239:2008
|
Process management for avionics - Preparation of an electronic components management plan |
|
ISO/IEC 8802-3:2000
|
Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications |
|
ASME B31.3:2016
|
PROCESS PIPING |
|
IEC 61000-4-4:2012 RLV
|
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
|
ISO 9606-1:2012
|
Qualification testing of welders Fusion welding Part 1: Steels |
|
NORSOK M 630 : REV 6
|
MATERIAL DATA SHEETS AND ELEMENT DATA SHEETS FOR PIPING |
|
PD 6667:2000
|
Obsolescence management. Code of practice for obsolescence notification and support from suppliers of electronic components |
|
BS 903-C2:1982
|
PHYSICAL TESTING OF RUBBER - DETERMINATION OF VOLUME RESISTIVITY |
|
ISO 15612:2004
|
Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure |
|
ISO 15614-1:2017
|
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
|
ISO 13357-2:2017
|
Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils |
|
ISO 1431-1:2012
|
Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing |
|
ISO 11500:2008
|
Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
|
ISO 15611:2003
|
Specification and qualification of welding procedures for metallic materials Qualification based on previous welding experience |
|
BS 6899:1991
|
SPECIFICATION FOR RUBBER INSULATION AND SHEATH OF ELECTRIC CABLES |
|
IEC 60945:2002
|
Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
|
ISO 8580:1987
|
Rubber and plastics hoses Determination of ultra-violet resistance under static conditions |
|
ISO 3722:1976
|
Hydraulic fluid power — Fluid sample containers — Qualifying and controlling cleaning methods |
|
IEC 62402:2007
|
Obsolescence management - Application guide |
|
IEC 60721-3-2:1997
|
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportation |
|
IEC 61300-3-4:2012
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation |
|
ASTM G 46 : 1994 : R2018
|
Standard Guide for Examination and Evaluation of Pitting Corrosion |
|
EN 10204:2004
|
Metallic products - Types of inspection documents |
|
IEC 60533:2015
|
Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull |
|
BS 7201-2:1995
|
HYDRAULIC FLUID POWER - GAS-LOADED ACCUMULATORS - DIMENSIONS OF GAS PORTS |
|
IEC 62309:2004
|
Dependability of products containing reused parts - Requirements for functionality and tests |
|
BS EN 14359:2017
|
Gas-loaded accumulators for fluid power applications |
|
ISO 11898-3:2006
|
Road vehicles Controller area network (CAN) Part 3: Low-speed, fault-tolerant, medium-dependent interface |
|
ASME PV CODE 5 : 2017
|
BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION |
|
API SPEC 17E : 2017
|
SPECIFICATION FOR SUBSEA UMBILICALS |
|
SAE AS 4059F : 2013
|
AEROSPACE FLUID POWER - CONTAMINATION CLASSIFICATION FOR HYDRAULIC FLUIDS |
|
ISO 15609-2:2001
|
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 2: Gas welding |
|
ISO 21018-1:2008
|
Hydraulic fluid power Monitoring the level of particulate contamination of the fluid Part 1: General principles |
|
API 17Q : 2010
|
RECOMMENDED PRACTICE ON SUBSEA EQUIPMENT QUALIFICATION |
|
ISO 16889:2008
|
Hydraulic fluid power Filters Multi-pass method for evaluating filtration performance of a filter element |
|
DIN 41612-2:1987-10
|
TWO-PART CONNECTORS FOR PRINTED BOARDS; GRID 2,54 MM; DIMENSIONS OF TYPES B, C AND D |
|
NORSOK M-710:2014
|
QUALIFICATION OF NON-METALLIC MATERIALS AND MANUFACTURERS - POLYMERS |
|
ISO 15613:2004
|
Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test |
|
IEC 60060-1:2010
|
High-voltage test techniques - Part 1: General definitions and test requirements |
|
AWS D1.1 : 2000
|
STRUCTURAL WELDING CODE - STEEL |
|
ISO 15607:2003
|
Specification and qualification of welding procedures for metallic materials General rules |
|
ISO 10945:1994
|
Hydraulic fluid power Gas-loaded accumulators Dimensions of gas ports |
|
ISO 4021:1992
|
Hydraulic fluid power — Particulate contamination analysis — Extraction of fluid samples from lines of an operating system |
|
API 17O : 2014
|
SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS) |
|
ISO 4405:1991
|
Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the gravimetric method |
|
API RP 17N : 2017
|
RECOMMENDED PRACTICE ON SUBSEA PRODUCTION SYSTEM RELIABILITY, TECHNICAL RISK, AND INTEGRITY MANAGEMENT |
|
ASTM D 471 : 2016-02
|
TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
|
API 17H : 2013
|
REMOTELY OPERATED TOOLS AND INTERFACES ON SUBSEA PRODUCTION SYSTEMS |
|
API 17D : 2011
|
DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT |
|
ISO 4407:2002
|
Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the counting method using an optical microscope |
|
IEC 60885-2:1987
|
Electrical test methods for electric cables. Part 2: Partial discharge tests |
|
EN 287-1:2011
|
Qualification test of welders - Fusion welding - Part 1: Steels |