• There are no items in your cart

AS 1154.1-2009

Current
Current

The latest, up-to-date edition.

Insulator and conductor fittings for overhead power lines Performance, material, general requirements and dimensions (Reconfirmed 2019)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

02-12-2009

Preview

Provides users and manufacturers of insulators and conductor fittings for overhead power lines with definitions of terms, performance requirements, dimensions, test methods and acceptance criteria.

This Standard sets out performance and general requirements for insulator and conductor fittings (other than helical fittings, OPGW and ADSS fittings, which are covered in AS 1154.3) together with the critical dimensions for cast, forged or fabricated insulator fittings for use on overhead electric power lines using insulators with minimum failing loads of 70 kN, 120 kN and 160 kN.Pulling eyes provided to assist installation and fittings for insulated service lines, aerial bundled cables and high-voltage covered conductors are not covered by this Standard.Fittings for high-temperature conductors are not covered by this Standard.

Committee
EL-010
DevelopmentNote
New PDF incorporating Amendment 1.
DocumentType
Standard
ISBN
0 7337 9004 6
Pages
55
ProductNote
Reconfirmation Notice 28/06/2019 Reconfirmed 28/06/2019.
This standard has been reconfirmed in Australia in 2019 and remains current in New Zealand.
PublisherName
Standards Australia
Status
Current
Supersedes

First published as AS C345.1-1962 and AS C345.2-1967.
AS C345.1-1962 revised and redesignated as AS 1154.1-1972.
AS C345.2-1967 revised and redesignated as AS 1154.2-1972.
Second edition AS 1154.1-1980.
Second edition AS 1154.2-1980.
Third edition AS 1154.1-1985.
Third edition AS 1154.2-1985.
AS 1154.1-1985 and AS 1154.2-1985 revised, amalgamated and designated as AS 1154.1-2004.
Fifth edition 2009.
Reconfirmed 2019. Originated as AS C345.1-1962 and AS C345.2-1967. Previous edition 2004. Fifth edition 2009. Reissued incorporating Amendment No. 1 (May 2020).

AS 1214-1983 Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series)
AS/NZS 1866:1997 Aluminium and aluminium alloys - Extruded rod, bar, solid and hollow shapes (Reconfirmed 2020)
AS 1831-2007 Ductile cast iron (Reconfirmed 2017)
AS 1816.1-2007 Metallic materials - Brinell hardness test Test method (ISO 6506-1:2005, MOD) (Reconfirmed 2017)
AS 1112.1-2000 ISO metric hexagon nuts Style 1 - Product grades A and B
AS/NZS CISPR 16.1.1:2006 Specification for radio disturbance and immunity measuring apparatus and methods Radio disturbance and immunity measuring apparatus - Measuring apparatus
AS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017)
AS 1154.1-2004 Insulator and conductor fittings for overhead power lines - Performance, material, general requirements and dimensions
AS 1832-2007 Malleable cast iron (Reconfirmed 2017)
AS 1112.2-2000 ISO metric hexagon nuts Style 2 - Product grades A and B
AS/NZS 4435.2:1999 Insulators - Composite for overhead power lines - Voltages greater than 1000 V a.c. Standard strength classes and end fittings for string insulator units (Reconfirmed 2016)
AS/NZS 1867:1997 Aluminium and aluminium alloys - Drawn tubes (Reconfirmed 2020)
AS 1733-1976 Methods for the determination of grain size in metals (Reconfirmed 2018)
AS/NZS 1390:1997 Cup head bolts with ISO metric coarse pitch threads (Reconfirmed 2016)
AS 2947.3-1995 Insulators - Porcelain and glass for overhead power lines - Voltages greater than 1000 V a.c. Couplings
AS 1112.4-2000 ISO metric hexagon nuts Chamfered thin nuts - Product grades A and B
AS/NZS CISPR 16.1.4:2004 Specification for radio disturbance and immunity measuring apparatus and methods Radio disturbance and immunity measuring apparatus - Ancillary equipment - Radiated disturbances
AS 1112.3-2000 ISO metric hexagon nuts - Product grade C
AS/NZS CISPR 16.1.5:2004 Specification for radio disturbance and immunity measuring apparatus and methods Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for 30 MHz to 1000 MHz
AS 1111.1-2000 ISO metric hexagon bolts and screws - Product grade C - Bolts
AS 1544.2-2003 Method for impact tests on metals Charpy V-notch (Reconfirmed 2017)
AS/NZS 3679.1:1996 Structural steel Hot-rolled bars and sections
AS 1110.1-2000 ISO metric hexagon bolts and screws - Product grades A and B - Bolts
AS 62271.301-2005 High voltage switchgear and controlgear Dimensional standardization of terminals (Reconfirmed 2016)
AS 1237.1-2002 Plain washers for metric bolts, screws and nuts for general purposes General plan (Reconfirmed 2015)
AS 1816.3-2007 Metallic materials - Brinell hardness test Calibration of reference blocks
AS 1448-2007 Carbon steel and carbon-manganese steels - Forgings (ruling section 300 mm maximum)
AS/NZS 1559:1997 Hot-dip galvanized steel bolts and associated nuts and washers for tower construction
AS 2074-2003 Cast steels
AS/NZS CISPR 16.1.2:2004 Specification for radio disturbance and immunity measuring apparatus and methods Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances
AS/NZS 2947.4:1999 Insulators - Porcelain and glass for overhead power lines - Voltages greater than 1000 V a.c. Test methods - Insulator strings and insulator sets
AS 1931.1-1996 High-voltage test techniques - General definitions and test requirements
AS/NZS 2947.1:1999 Insulators - Porcelain and glass for overhead power lines - Voltages greater than 1000 V a.c. Test methods - Insulator units
AS 1237.2-2002 Plain washers for metric bolts, screws and nuts for general purposes - Tolerances
AS 1154.3-1985 Insulator and conductor fittings for overhead power lines - Performance and general requirements for helical fittings
AS 1444-2007 Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties (Reconfirmed 2017)
AS/NZS 3678:1996 Structural steel - Hot-rolled plates, floorplates and slabs
AS 1816.2-2007 Metallic materials - Brinell hardness test Verification and calibration of testing machines
AS 1442-2007 Carbon steels and carbon-manganese steels - Hot rolled bars and semifinished products (Reconfirmed 2017)
AS 4291.1-2000 Mechanical properties of fasteners made of carbon steel and alloy steel - Bolts, screws and studs

AS/NZS 7000:2016 Overhead line design
HB 331-2012 Overhead line design
AS/NZS 7000:2010 Overhead line design - Detailed procedures

View more information
US$118.31
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.