Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

07-28-2003

Publisher

Standards Australia

Preview

Specifies an acceptance sampling system for inspection by attributes. It is indexed in terms of the acceptance quality limit (AQL). This Standard is identical with and reproduced from ISO2859-1:1999.

1.1 This part of ISO 2859 specifies an acceptance sampling system for inspection by attributes. It is indexed in terms of the acceptance quality limit (AQL).Its purpose is to induce a supplier through the economic and psychological pressure of lot non-acceptance to maintain a process average at least as good as the specified acceptance quality limit, while at the same time providing an upperlimit for the risk to the consumer of accepting the occasional poor lot.Sampling schemes designated in this part of ISO 2859 are applicable, but not limited, to inspection of- end items,- components and raw materials,- operations,- materials in process,- supplies in storage,- maintenance operations,- data or records, and- administrative procedures.1.2 These schemes are intended primarily to be used for a continuing series of lots, that is, a series long enough to allow the switching rules (9.3) to be applied. These rules provide:a) a protection to the consumer (by means of a switch to tightened inspection or discontinuation of sampling inspection) should a deterioration in quality be detected;b) an incentive (at the discretion of the responsible authority) to reduce inspection costs (by means of a switch to reduced inspection) should consistently good quality be achieved.Sampling plans in this part of ISO 2859 may also be used for the inspection of lots in isolation but, in this case the user is strongly advised to consult the operating characteristic curves to find a plan that will yield the desired protection (see 12.6). In that case, the user is also referred to the sampling plans indexed by limiting quality (LQ) given in ISO 2859-2.

Committee	QR-008
DocumentType	Standard
ISBN	0 7337 5391 4
Pages	87
ProductNote	Reconfirmed 22/07/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 22/07/2016
PublisherName	Standards Australia
Status	Current
Supersedes	AS 1199-1988 DR 03247 CP

Standards	Relationship
ISO 2859-1:1999	Identical

First published as AS 1199-1972.Second edition 1988.Revised and redesignated as AS 1199.1-2003.Reconfirmed 2016. Originated as AS 1199-1972. Previous edition AS 1199-1988. Revised and redesignated as AS 1199.1-2003.

AS 4647-2011	Diaphragm gas meters
AS 2944.2-2007	Plastics pipes and fittings for gas reticulation Polyamide fittings (Reconfirmed 2023)
AS 1442-2007	Carbon steels and carbon-manganese steels - Hot rolled bars and semifinished products (Reconfirmed 2017)
AS 1604.1-2005	Specification for preservative treatment - Sawn and round timber
AS 4145.2-2008	Locksets and hardware for doors and windows Mechanical locksets for doors and windows in buildings
AS 1085.14-2012	Railway track material Prestressed concrete sleepers
AS 1599-2006	Pressure-sensitive and water activated adhesive tape for packaging and office applications
AS 3571.2-2009	Plastics piping systems - Glass reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin Pressure and non-pressure water supply (ISO 10639:2004, MOD)
AS 3585-2008	End fittings for synthetic flat-webbing and round slings (Reconfirmed 2019)
AS/NZS 1477:2017	PVC pipes and fittings for pressure applications
AS 3565.4-2007	Meters for cold and heated drinking and non-drinking water supplies In-service compliance testing (Reconfirmed 2019)
AS/NZS 1254:2010	PVC-U pipes and fittings for stormwater and surface water applications
AS/NZS 1576.2:2016	Scaffolding Couplers and accessories
AS/NZS 2080:2006	Safety glazing for land vehicles
AS 5100.5-2004	Bridge design - Concrete
AS/NZS 1577:2013	Scaffold decking components
AS/NZS 2492:2007	Cross-linked polyethylene (PE-X) pipes for pressure applications
AS/NZS 4455.1:2008	Masonry units, pavers, flags and segmental retaining wall units Masonry units (Reconfirmed 2020)
AS 1357.1-2004	Valves primarily for use in heated water systems - Protection valves
AS 1901-2004	Electroplated coatings - Gold and gold alloys
AS 2309-2008	Durability of galvanized and electrogalvanized zinc coatings for the protection of steel in structural applications - Atmospheric
AS ISO 10017-2006	Guidance on statistical techniques for ISO 9001:2000 (ISO/TR 10017, Ed. 2.0 (2003) MOD)
AS 4049.4-2006	Paints and related materials - Pavement marking materials High performance pavement marking systems
AS/NZS 3518:2013	Acrylonitrile butadine styrene (ABS) compounds, pipes and fittings for pressure applications
AS 1646.4-2005	Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Thermoplastic elastomers and vulcanizates
AS/NZS 1163:2016	Cold-formed structural steel hollow sections
AS 2321-2006	Short-link chain for lifting purposes
AS 2703-2008	Vehicle loop detector sensors
AS 1406-2004	Electroplated coatings - Nickel and chromium on plastics for decorative applications (Reconfirmed 2017)
AS 4797-2009	Stainless steel chain for lifting purposes (Reconfirmed 2019)
AS 5039-2008	Security screen doors and security window grilles
AS 5074-2009	Natural latex rubber condoms - Requirements and test methods
AS 1597.2-2013	Precast reinforced concrete box culverts Large culverts (exceeding 1200 mm span or 1200 mm height and up to and including 4200 mm span and 4200 mm height)
AS 681.3-2008	Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Cellular materials of vulcanized rubber
AS/NZS 2009:2006	Glass beads for pavement-marking materials (Reconfirmed 2016)
AS 4125.1-2009	Sound laboratory practice in food and water microbiology laboratories - Premises, safety, sample management, regulatory compliance and record management
AS 1085.20-2006	Railway track material - Part 20: Welding of steel rail
AS/NZS 4677:2010	Steel utility services poles
AS 2439.1-2007	Perforated plastics drainage and effluent pipe and fittings Perforated drainage pipe and associated fittings
AS 6669:2016	Plywood - Formwork
AS 1447-2007	Hot-rolled spring steels (Reconfirmed 2017)
AS 4032.1-2005	Water supply - Valves for the control of heated water supply temperatures Thermostatic mixing valves - Materials design and performance requirements
AS 2001.2.25.4-2006	Methods of test for textiles Physical tests - Determination of the abrasion resistance of fabrics by the Martindale method - Assessment of appearance change
AS 2080:2019	Safety glazing for land vehicles
AS 4176.8-2010	Multilayer pipes for pressure applications Multilayer pipe systems for consumer gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Specifications for systems (ISO 17484-1:2006, MOD)
AS 4672.1:2007	Steel prestressing materials General requirements
AS 4181-2013	Repair and off-take clamps for water industry purposes (Reconfirmed 2023)
AS/NZS 1605.1:2018	Methods for sampling and analysing timber preservatives and preservative-treated timber General requirements, sampling, and determination of sapwood and heartwood presence
AS 4256.1-2006	Plastic roof and wall cladding materials General requirements (Reconfirmed 2018)
AS/NZS 3750.7:2009	Paints for steel structures Aluminium paint (Reconfirmed 2021)
AS/NZS 4999:2006	PVC-U maintenance shafts
AS/NZS 1576.2:2009	Scaffolding Couplers and accessories
AS/NZS 3879:2006	Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and fittings
AS/NZS 4998:2009	Bolted unrestrained mechanical couplings for waterworks purposes (Reconfirmed 2022)
AS 1085.20-2012	Railway track material Welding of steel rail
AS 3775.1-2004	Chain slings - Grade T Product specification
AS/NZS 4765:2007	Modified PVC (PVC-M) pipes for pressure applications
AS/NZS 2728:2013	Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements
AS 5082.2-2007	Polybutylene (PB) plumbing pipe systems - Metric series Mechanical and fusion jointing systems (Reconfirmed 2017)
AS/NZS 1260:2009	PVC-U pipes and fittings for drain, waste and vent application
AS/NZS 1260:2017	PVC-U pipes and fittings for drain, waste and vent applications
AS 681.1-2008	Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Vulcanized rubber
AS/NZS 4065:2010	Concrete utility services poles
AS/NZS 3879:2011	Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings
AS 1418.10(INT)-2004	Cranes, hoists and winches Elevating work platforms
AS 4506-2005	Metal finishing - Thermoset powder coatings
AS/NZS 1477:2006	PVC pipes and fittings for pressure applications
AS 1379-2007	Specification and supply of concrete (Reconfirmed 2017)
AS/NZS 2642.1:2007	Polybutylene (PB) plumbing pipe systems Polybutylene (PB) pipe extrusion compounds
AS 3743-2003	Potting mixes
AS 2001.2.25.3-2006	Methods of test for textiles Physical tests - Determination of the abrasion resistance of fabrics by the Martindale method - Determination of mass loss
AS/NZS 4791:2006	Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process (Reconfirmed 2017)
AS/NZS 4793:2009	Mechanical tapping bands for waterworks purposes
AS/NZS 3518:2004	Acrylonitrile butadiene styrene (ABS) compounds, pipes and fittings for pressure applications
AS 2439.2-2007	Perforated plastics drainage and effluent pipe and fittings Perforated effluent pipe and associated fittings for sewerage applications
AS 5081-2008	Hydraulically operated automatic control valves for waterworks purposes (Reconfirmed 2016)
AS 1397-2011	Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium
AS/NZS 4067:2004	Firefighters' helmets
AS 1443-2004	Carbon and carbon-manganese steel - Cold finished bars (Reconfirmed 2022)
AS/NZS 2210.5:2009	Occupational protective footwear Specification for occupational footwear (ISO 20347:2004, MOD)
AS 4956-2008	Air valves for water supply
AS 4176.2-2010	Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Pipes (ISO 21003-2:2008, MOD) (Reconfirmed 2022)
AS/NZS 4455.2:2010	Masonry units, pavers, flags and segmental retaining wall units Pavers and flags (Reconfirmed 2020)
AS/NZS 3679.1:2016	Structural steel Hot-rolled bars and sections
AS 1638-2008	Motor vehicles - Light alloy road wheels
AS 4256.2-2006	Plastic roof and wall cladding materials Unplasticized polyvinyl chloride (uPVC) building sheets (Reconfirmed 2018)
AS 2854-2004	Tinplate cans for general use
AS 4883-2008	Air valves for sewerage
AS 2943-2007	Plastics pipes and fittings for gas reticulation - Polyamide compounds (Reconfirmed 2022)
AS 2905-2005	Steel drums
AS 4606-2012	Grade S fire resistant and antistatic requirements for conveyor belting and conveyor accessories (Reconfirmed 2024)
AS 4049.2-2005	Paints and related materials - Pavement marking materials Thermoplastic pavement marking materials - For use with surface applied glass beads
AS ISO 8009-2009	Mechanical contraceptives - Reusable natural and silicone rubber contraceptive diaphragms - Requirements and tests
AS 1444-2007	Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties (Reconfirmed 2017)
AS 681.2-2008	Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Thermoplastic elastomers
AS 4176.7-2010	Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Assessment of conformity (ISO/TS 21003-7:2008, MOD)
AS 4883:2017	Air valves for sewerage
AS/NZS 4357.0:2005	Structural laminated veneer lumber Specifications (Reconfirmed 2016)
AS 1856-2004	Electroplated coatings - Silver
AS 4256.4-2006	Plastic roof and wall cladding materials Unplasticized polyvinyl chloride (uPVC) wall cladding boards (Reconfirmed 2018)
AS/NZS 3718:2005	Water supply - Tap ware (Reconfirmed 2016)
AS 4049.3-2005	Paints and related materials - Pavement marking materials Waterborne paint - For use with surface applied glass beads (Reconfirmed 2016)
AS 3600:2018	Concrete structures
AS 681.4-2008	Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Cast polyurethane sealing elements
AS/NZS 4944:2006	Gas meters - In-service compliance testing (Reconfirmed 2017)
AS 4397-2007	Electroplated coatings of zinc on steel fasteners with imperial threads
AS 1192-2004	Electroplated coatings - Nickel and chromium (Reconfirmed 2017)
AS/NZS 2041.4:2010	Buried corrugated metal structures Helically formed sinusoidal pipes
AS 6669-2007	Plywood - Formwork
AS 1450-2007	Steel tubes for mechanical purposes (Reconfirmed 2017)
AS 2429-2004	Electroplated coatings of rhodium for general engineering applications
AS/NZS 2210.3:2009	Occupational protective footwear Specification for safety footwear (ISO 20345:2004, MOD)
AS 4454-2003	Composts, soil conditioners and mulches
AS/NZS 2728:2007	Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements
AS 1154.1-2004	Insulator and conductor fittings for overhead power lines - Performance, material, general requirements and dimensions
AS 5082.1-2007	Polybutylene (PB) plumbing pipe systems - Metric series Metric polybutylene (PB) pipes for hot and cold water applications
AS 5100.5:2017	Bridge design Concrete
AS/NZS 5065:2005	Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications (Reconfirmed 2017)
AS 3777-2008	Shank hooks and large eye hooks - Maximum 60 t (Reconfirmed 2019)
AS 4032.4:2014	Water supply - Valves for the control of heated water supply temperatures Thermostatically controlled taps for the control of heated water supply temperatures
AS 3680-2008	Polyethylene sleeving for ductile iron piping (Reconfirmed 2021)
AS/NZS 4680:2006	Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017)
AS/NZS 4765:2017	Modified PVC (PVC-M) pipes for pressure applications
AS 2770-2005	Measuring cylinders - Plastics - Graduated
AS/NZS 2269:2004	Plywood - Structural
AS/NZS 4792:2006	Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process (Reconfirmed 2017)
AS 3600-2009	Concrete structures
AS/NZS 4131:2010	Polyethylene (PE) compounds for pressure pipes and fittings (Reconfirmed 2022)
AS/NZS 1577:2018	Scaffold decking components
AS/NZS 1605.1:2006	Methods for sampling and analysing timber preservatives and preservative-treated timber General requirements, sampling, and determination of sapwood and heartwood presence
AS 2318-2006	Swivels for lifting applications (Reconfirmed 2022)
AS 5588-2013	Grapevine propagation material
AS 3571.1-2009	Plastics piping systems - Glass reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin Pressure and non-pressure drainage and sewerage (ISO 10467:2004, MOD)
AS 4738.1-2007	Metal castings - Ferrous sand moulded
AS/NZS 60079.7:2006	Explosive atmospheres Equipment protection by increased safety 'e'
AS 4738.1-2004	Metal castings - Ferrous sand moulded
AS 1138-2008	Thimbles for wire rope (Reconfirmed 2019)
AS 1448-2007	Carbon steel and carbon-manganese steels - Forgings (ruling section 300 mm maximum)
AS 4371-2012	Ceramic tableware
AS/NZS 4455.3:2008	Masonry units, pavers, flags and segmental retaining wall units Segmental retaining wall units (Reconfirmed 2020)
AS/NZS 4129:2008	Fittings for polyethylene (PE) pipes for pressure applications
AS 4285-2007	Skylights
AS/NZS 2272:2006	Plywood - Marine (Reconfirmed 2016)
AS 4049.1-2005	Paints and related materials - Pavement marking materials Solvent-borne paint - For use with surface applied glass beads (Reconfirmed 2016)
AS 4314-2005	Founding - Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores
AS 4256.3-2006	Plastic roof and wall cladding materials Glass fibre reinforced polyester (GRP) (Reconfirmed 2018)
AS/NZS 2642.2:2008	Polybutylene (PB) plumbing pipe systems Polybutylene (PB) pipe for hot and cold water applications (Reconfirmed 2022)
AS/NZS 3679.2:2010	Structural steel Welded I sections
AS 4256.5-2006	Plastic roof and wall cladding materials Polycarbonate (Reconfirmed 2018)
AS/NZS 3678:2011	Structural steel - Hot-rolled plates, floorplates and slabs
AS/NZS 2210.4:2009	Occupational protective footwear Specification for protective footwear (ISO 20346:2004, MOD)
AS 2001.2.25.2-2006	Methods of test for textiles Physical tests - Determination of the abrasion resistance of fabrics by the Martindale method - Determination of specimen breakdown
AS 2453-2004	Electroplated coatings - Chromium for engineering applications (Reconfirmed 2017)
AS 1666.1-2009	Wire-rope slings Product specification (Reconfirmed 2019)
AS 3996-2006	Access covers and grates
AS 3705-2003	Geotextiles - Identification, marking, and general data
AS/NZS 4179:2014	Single-use sterile rubber surgical gloves - Specification (ISO 10282:2014, MOD)
AS 2944.1-2007	Plastics pipes and fittings for gas reticulation Polyamide pipes (Reconfirmed 2023)
AS 3818.1-2003	Timber - Heavy structural products - Visually graded General requirements
AS 4169-2004	Electroplated coatings - Tin and tin alloys (ISO 2093:1986, MOD) (Reconfirmed 2017)
AS/NZS 2269.0:2008	Plywood - Structural Specifications
AS/NZS 4130:2009	Polyethylene (PE) pipes for pressure applications

View more information

US$178.29

Excluding Tax where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

Log into your Account

AS 1199.1-2003

Current

Table of Contents

Abstract

Scope

General Product Information

International Equivalents

History

Standards Referencing This Book

Category

Subcategory

Access your standards online with a subscription