Preview

AS 1432-1996

Superseded

View Superseded by

Preview

Copper tubes for plumbing, gasfitting and drainage applications

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

06-30-2017

Published date

01-01-1996

Publisher

Standards Australia

Preview

1 - AS 1432-1996 COPPER TUBES FOR PLUMBING, GASFITTING AND DRAINAGE APPLICATIONS
4 - PREFACE
5 - CONTENTS
6 - FOREWORD
7 - 1 SCOPE
7 - 2 REFERENCED DOCUMENTS
7 - 3 DEFINITIONS
7 - 3.1 Bendable temper
7 - 3.2 Mean outside diameter
7 - 3.3 Ovality
7 - 4 CLASSIFICATION
8 - 5 DESIGNATION
8 - 6 INTERPRETATION OF SPECIFIED LIMITING VALUES
8 - 7 CHEMICAL COMPOSITION
9 - 8 CONTAMINATION OF WATER
10 - 9 TEMPER AND FORM OF MATERIAL
10 - 9.1 Temper
10 - 9.2 Form
10 - 10 DIMENSIONS AND TOLERANCES
10 - 10.1 Mean outside diameter
10 - 10.2 Ovality
10 - 10.3 Thickness
10 - 10.4 Length
11 - 11 HARDNESS TEST
11 - 12 FREEDOM FROM DEFECTS
11 - 13 NON-DESTRUCTIVE TEST
11 - 13.1 General
12 - 13.2 Eddy current test
12 - 14 MARKING
12 - 14.1 General
12 - 14.2 Incising
13 - 14.3 Colour coding
13 - 14.3.1 Form
13 - 14.3.2 Colours
13 - 14.3.3 Information
14 - APPENDIX A - PURCHASING GUIDELINES
14 - A1 GENERAL
14 - A2 INFORMATION TO BE SUPPLIED BY THE PURCHASER
14 - A3 CERTIFICATES
14 - A3.1 Certificates of compliance
14 - A3.2 Test certificates
15 - APPENDIX B - SAFE WORKING PRESSURE AND TESTING PRESSURE FOR COPPER TUBES
15 - B1 SAFE WORKING PRESSURE
15 - B2 TESTING PRESSURE
17 - APPENDIX C - HYDROSTATIC TEST
17 - C1 SCOPE
17 - C2 PRINCIPLE
17 - C3 APPARATUS
17 - C4 PROCEDURE
17 - C5 REPORT

Specifies requirements for round, seamless copper tubes, supplied in coils and straight lengths for use in plumbing, gasfitting and drainage applications. The ranges of nominal sizes are DN 6 to DN 200 inclusive for Types A and B, DN 10 to DN 25 inclusive for Type C and DN 32 to DN 150 inclusive for Type D. Details of dimensions and tolerances, chemical composition, temper and form of material, testing and marking are specified. The appendices propose purchasing guidelines, safe working pressure, testing pressure, and hydrostatic test.

This Standard specifies requirements for round seamless copper tubes intended for use in pressure and non-pressure plumbing, gasfitting and drainage applications.NOTES:1 Clause 4 gives classification of tubes covered by this Standard.2 Guidelines to purchasers on information that should be supplied at the time of enquiry or order are detailed in Appendix A.3 Safe working pressure and testing pressure for installed copper tubes are given in Appendix B.

Committee	WS-018
DocumentType	Standard
ISBN	0 7337 0357 7
Pages	12
PublisherName	Standards Australia
Status	Superseded
SupersededBy	AS 1432-2004
Supersedes	AS 1432-1990
UnderRevision	DR 02593

Amendment 1 to AS 1432-1996 see DR 98078 CP. Under Revision see DR 02593 First published as part of AS B2-1928.Second edition 1950.Revised and redesignated in part as AS B158-1961.Second edition 1967.Third edition 1969.Revised and redesignated AS 1432-1973.Second edition 1983.Third edition 1990.Fourth edition 1996. First published as part of AS B2-1928. Second edition 1950. Revised and redesignated in part as AS B158-1961. Second edition 1967. Third edition 1969. Revised and redesignated AS 1432-1973. Second edition 1983. Third edition 1990. Fourth edition 1996.

AS 4041-1998	Pressure piping
AS 3500.0-1990	National Plumbing and Drainage Code Glossary of terms
AS 2706-1984	Numerical values - Rounding and interpretation of limiting values
AS 1817-1991	Metallic materials - Vickers hardness test
AS 1349-1986	Bourdon tube pressure and vacuum gauges (Reconfirmed 2018)
AS 3855-1994	Suitability of plumbing and water distribution systems products for contact with potable water
AS 2084-1987	Non-destructive testing - Eddy current testing of metal tubes
AS 2738.2-1984	Copper and copper alloys - Compositions and designations - Wrought products

AS 2896-1991	Medical gas systems - Installation and testing of non-flammable medical gas pipeline systems
AS 2896-1998	Medical gas systems - Installation and testing of non-flammable medical gas pipeline systems
AS 4563-2003 (AG 300)	Commercial catering gas equipment
AS 3496-1999	Metal-bodied and plastic-bodied taps
AS 1357.1-2004	Valves primarily for use in heated water systems - Protection valves
AS 1882-2002	Earth and bonding clamps (Reconfirmed 2020) (Reconfirmed 2013)
AS 4072.1-1992	Components for the protection of openings in fire-resistant separating elements - Service penetrations and control joints
AS 3688-1994	Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors
AS/NZS 4020:1999	Products for use in contact with drinking water
AS/NZS 3500.1.2:1998	National plumbing and drainage Water supply - Acceptable solutions
AS 1768-1991	Lightning protection
ATS 5200.020-2004	Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with mains supply
AS 4032.2-2002	Water supply - Valves for the control of hot water supply temperatures - Tempering valves and end of line temperature actuated devices
AS 3517-1995	Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications
AS 1718-1992	Water supply - Copper alloy screw-down pattern taps - Specified by dimensions
AS/NZS 3500.4.2:1997	National Plumbing and Drainage Hot water supply systems - Acceptable solutions
AS/NZS 3500.4:2003	Plumbing and drainage Heated water services
AS/NZS 3500.2:2003	Plumbing and drainage Sanitary plumbing and drainage
AS/NZS 1425:1999	LP Gas fuel systems for vehicle engines
AS 3718-1992	Water supply - Metal-bodied taps - Specified by performance
AS 1357.2-1992	Water supply - Valves for use with unvented water heaters - Control valves
AS 2419.1-1991	Fire hydrant installations System design, installation and commissioning
AS 1357.1-1992	Water supply - Valves for use with unvented water heaters - Protection valves
AS 4809-2003	Copper pipe and fittings - Installation and commissioning
AS/NZS 3500.3:2003	Plumbing and drainage Stormwater drainage
AS 4554-2002 (AG 104)	Gas laundry dryers
AS 2118.9-1995	Automatic fire sprinkler systems Piping support and installation (Reconfirmed 2013)
AS 3500.1-1992	National Plumbing and Drainage Code - Water supply
AS 2887-1993	Plastic waste fittings
ATS 5200.007-2004	Technical Specification for plumbing and drainage products - Water hammer arrestors
MP 52-1997	Manual of authorization procedures for plumbing and drainage products
AS 1628-1994	Water supply - Copper alloy gate, globe and non-return valves
AS 1910-1994	Water supply - Float control valves for use in hot and cold water
AS 4041-1992	Pressure piping
AS 1361-1995	Electric heat-exchange water heaters - For domestic applications (Reconfirmed 2016)
ATS 5200.021-2004	Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with break tank supply
AS 4020(INT)-1994	Products for use in contact with water intended for human consumption with regard to their effect on the quality of water
AS/NZS 1425:2003	LP Gas fuel systems for vehicle engines
AS 2712-1993	Solar water heaters - Design and construction
AS 2129-1994	Flanges for pipes, valves and fittings
AS/NZS 3718:2003	Water supply - Tap ware
AS 1357.2-1998	Valves primarily for use in warm and hot water systems - Control valves
AS/NZS 3500.5:2000	National Plumbing and Drainage - Domestic installations
AS 3500.4-1994	National Plumbing and Drainage Code Hot water supply systems
AS 4983-2003	Gas fuel systems for forklifts and industrial engines
AS 2118.1-1995	Automatic fire sprinkler systems - Standard
MP 52-2001	Manual of authorization procedures for plumbing and drainage products
AS/NZS 2927:2001	The storage and handling of liquefied chlorine gas
AS 3496-1995	Authorization requirements for plumbing products - Metal-bodied and plastic-bodied taps
AS 2419.1-1994	Fire hydrant installations - System design, installation and commissioning
AS/NZS 2712:2002	Solar and heat pump water heaters - Design and construction
AS 4118.2.1-1995	Fire sprinkler systems Piping - General (Reconfirmed 2013)
AS/NZS 3500.1:2003	Plumbing and drainage Water services
AS/NZS 3718:1997	Water supply - Metal-bodied taps - Specified by performance
AS 1589-1994	Copper and copper alloy waste fittings
AS/NZS 1768(INT):2003	Lightning protection
AS 1589-2001	Copper and copper alloy waste fittings (Reconfirmed 2018)
AS 4032-1992	Thermostatic mixing valves - Materials, design and performance requirements
AS/NZS 3500.3.2:1998	National plumbing and drainage Stormwater drainage - Acceptable solutions

View more information

US$48.59

Excluding Tax where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

Log into your Account

AS 1432-1996

Superseded

Table of Contents

Abstract

Scope

General Product Information

History

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory

Access your standards online with a subscription