AS 1722.2-1992 (R2017)

Current

Current The latest, up-to-date edition.

Preview

Pipe threads of Whitworth form Fastening pipe threads

Publisher: Standards Australia

Published:

Available Formats: PDF 9 Users - English, PDF 5 Users - English, PDF 3 Users - English, PDF 1 User - English, Hardcopy - English
More Info on product formats

Abstract - (Show below) - (Hide below)

Specifies thread form, thread dimensions, tolerance, and associated gauges and gauging practices for fastening threads for pipes of nominal bore 4 mm to 150 mm. Incorporates modified tables for screw gauge limits and dimensions for fastening pipe threads; setting plugs for GO and NOT GO screw calliper gauges; provision for the use of adjustable screw calliper gauges; and wear allowance for GO gauges.RECONFIRMATION NOTICETechnical Committee ME-029 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 16 June 2017.The following are represented on Technical Committee ME-029:Association of Accredited Certification BodiesAssociation of Wall and Ceiling Industries of AustraliaAustralian Chamber of Commerce and IndustryAustralian Engineered Fasteners and Anchors CouncilAustralian Industry GroupAustralian Steel InstituteAUSTROADSBureau of Steel Manufacturers of AustraliaGalvanizers Association of AustraliaMaterials AustraliaNational Association of Steel-Framed HousingNational Association of Testing Authorities AustraliaNew Zealand Heavy Engineering Research AssociationSociety of Automotive Engineers- AustralasiaSteel Construction New ZealandSwinburne University of Technology

Scope - (Show below) - (Hide below)

This Standard specifies thread form, thread dimensions, tolerance, and associated gauges and gauging practices for threads used for fastening pipes.The Standard covers pipe threads for pipe of nominal bore size 4 mm to 150 mm.NOTES:1 Where these threads are used on pipes for conveying fluids, the sealing is effected by means other than thread interference (e.g. gaskets on flanges or O-rings).2 Pipe threads of Whitworth form where pressure tight joints are made on the threads are specified in AS 1722.1.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Reconfirmed 07/07/2017. This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 07/07/2017
Pages
ISBN
Committee	ME-028
Supersedes	DR 91074

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
ISO 2283 : 2000(R2017)	Identical
ISO 2283 : 2000(R2017)	Identical
ISO 2281 : 1990	Identical

History - (Show below) - (Hide below)

First published as AS B154-1958 (endorsement of BS 2779-1956 without amendment).
Revised and redesignated AS 1722.2-1975.
Second edition 1989.
Third edition 1992.
Reconfirmed 2017.

Standards Referenced By This Book - (Show below) - (Hide below)

AS 1098-1972	Roller-type screw calliper gauges
NZS/AS 4557(INT) : 2013	DOMESTIC OUTDOOR GAS BARBECUES
NZS/AS 4558(INT) : 2013	DECORATIVE GAS LOG AND OTHER FUEL EFFECT APPLIANCES
AS 3528-1988	Cylindrical screw threads - Vocabulary
AS 3501-1987 (R2017)	Parallel screw threads of Whitworth form (BSW and BSF) and associated gauges and gauging practice
AS 1722.1-1975	Pipe threads of Whitworth form Sealing pipe threads
AS B129-1968	Designs for geometric limit gauges (plain and screwed in inch units)
NZS/AS 4557(INT) : 2013	DOMESTIC OUTDOOR GAS BARBECUES
NZS/AS 4558(INT) : 2013	DECORATIVE GAS LOG AND OTHER FUEL EFFECT APPLIANCES

Standards Referencing This Book - (Show below) - (Hide below)

AS 1631-1994 (R2018)	Cast grey and ductile iron non-pressure pipes and fittings
AS 2304:2019	Water storage tanks for fire protection systems
AS 2845.1-1995	Water supply - Backflow prevention devices Materials, design and performance requirements
AS 2470-2005 (R2016)	Steel cylinders for compressed gases - Welded three-piece construction with longitudinal joint - 11kg to 150kg
AS 3517-2007 (R2018)	Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications
AS/NZS 4766:2006	Polyethylene storage tanks for water and chemicals
AS 1940:2017	The storage and handling of flammable and combustible liquids
AS/NZS 1477:2017	PVC pipes and fittings for pressure applications
AS 4563-2003 (AG 300-2003)	Commercial catering gas equipment
AS 3496-1999	Metal-bodied and plastic-bodied taps
AS/NZS 4766(Int):2002	Polyethylene storage tanks for water and chemicals
AS 1357.1-2004	Valves primarily for use in heated water systems Protection valves
AS 4181-1999	Stainless steel clamps for waterworks purposes
AS/NZS 2845.1:2010	Water supply - Backflow prevention devices Materials, design and performance requirements
AS/NZS 3518:2013	Acrylonitrile butadine styrene (ABS) compounds, pipes and fittings for pressure applications
AS 3565.1-2004	Meters for water supply Cold water meters
AS 3653-1993	Boilers - Safety, management, combustion and other ancillary equipment
AS 4181-1994	Stainless steel clamps for waterworks purposes
AS 2888.2-1993	Methods of testing plastics waste fittings Method for determining dimensions
AS 1349-1986 (R2018)	Bourdon tube pressure and vacuum gauges
AS 3688-1994	Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors
AS 3565.1-1998	Meters for cold potable water Volumetric chamber and turbine meters
AS 4563-2004 (R2016)	Commercial catering gas equipment
AS 4032.2-2002	Water supply - Valves for the control of hot water supply temperatures Tempering valves and end of line temperature actuated devices
AS 2469-1998	Steel cylinders for compressed gases - Welded two-piece construction - 0.1 kg to 35 kg
AS 1210-2010	Pressure vessels
AS 3517-1995	Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications
AS 4558-2011	Decorative gas log and other fuel effect appliances
AS/NZS 4692.1:2005 (R2016)	Electric water heaters Energy consumption, performance and general requirements
AS 3688:2016	Water supply and gas systems - Metallic fittings and end connectors
AS 2941-2002	Fixed fire protection installations - Pumpset systems
AS 2888.2-2002 (R2017)	Methods of testing plastics waste fittings Method for determining dimensions
AS 1308-1987 (R2016)	Electric water heaters - Thermostats and thermal cutouts
AS 1718-1992	Water supply - Copper alloy screw-down pattern taps - Specified by dimensions
AS 4032.2-2005 (R2015)	Water supply - Valves for the control of hot water supply temperatures Tempering valves and end-of-line temperature-actuated devices
AS 2473.2-2007	Valves for compressed gas cylinders Outlet connections (threaded) and stem (inlet) threads
AS/NZS 5263.0:2017	Gas appliances General requirements
AS 3718-1992	Water supply - Metal-bodied taps - Specified by performance
AS 1357.2-1992	Water supply - Valves for use with unvented water heaters Control valves
AS 4706-2001 (R2016)	Pressure gauges for regulators used with compressed gas cylinders
AS 3565.1-2010	Meters for cold and heated drinking and non-drinking water supplies Technical requirements
AS 4747.2-2013	Meters for non-urban water supply Technical requirements for closed conduit meters fully charged
AS 1940-2004	The storage and handling of flammable and combustible liquids
AS 5082.2-2007 (R2017)	Polybutylene (PB) plumbing pipe systems - Metric series Mechanical and fusion jointing systems
AS 1357.1-1992	Water supply - Valves for use with unvented water heaters Protection valves
AS/NZS 1477:1996	PVC pipes and fittings for pressure applications
AS 1628-1999 (R2015)	Water supply - Metallic gate, globe and non-return valves
AS 4565-2004 (R2017)	Radiant gas heaters for outdoor and non-residential indoor use
AS/NZS 1477:2006	PVC pipes and fittings for pressure applications
AS 4041-2006 (R2016)	Pressure piping
AS 2475-2001 (R2018)	Threaded hose connection fittings for bituminous materials
AS/NZS 2022:2003	Anhydrous ammonia - Storage and handling
AS 2941-2008	Fixed fire protection installations - Pumpset systems
AS 3673-1989	Malleable cast iron threaded pipe fittings
AS/NZS 3518:2004	Acrylonitrile butadiene styrene (ABS) compounds, pipes and fittings for pressure applications
AS 2887-1993 (R2017)	Plastic waste fittings
AS 4747.3-2013	Meters for non-urban water supply Technical requirements for open channel meters
AS 3577-2006 (R2017)	Steel cylinders for compressed gases - Welded - 150 kg to 500 kg
AS 1628-1994	Water supply - Copper alloy gate, globe and non-return valves
AS 4556-2011	Indirect gas-fired ducted air heaters
AS 1910-1994	Water supply - Float control valves for use in hot and cold water
AS 4041-1992	Pressure piping
AS 2902-2005 (R2016)	Medical gas systems - Low pressure flexible hose assemblies
AS/NZS 1477:1999	PVC pipes and fittings for pressure applications
AS/NZS 3662:1993	Water supply - Water efficient mains pressure shower spray heads
AS 1361-1995 (R2016)	Electric heat-exchange water heaters - For domestic applications
AS 2941-2013	Fixed fire protection installations - Pumpset systems
AS/NZS 3112:2000	Approval and test specification - Plugs and socket-outlets
AS 3542(Int)-1993	Small pleasure boats - Waste water retention and treatment - Toilet retention systems
AS/NZS 4129:2000	Fittings for polyethylene (PE) pipes for pressure applications
AS/NZS 3718:2005 (R2016)	Water supply - Tap ware
AS 4397-2007 (R2017)	Electroplated coatings of zinc on steel fasteners with imperial threads
AS 2888.1-1993	Methods of testing plastics waste fittings Method of determining the suitability of connection threads of BSP form
AS 3498(Int)-1993	Authorization requirements for plumbing products - Water heaters (all types)
AS/NZS 3718:2003	Water supply - Tap ware
AS 1910-2004 (R2016)	Water supply - Float control valves for use in hot and cold water
AS 1357.2-1998	Valves primarily for use in warm and hot water systems Control valves
AS 2473-1996	Valves for compressed gas cylinders (threaded outlet)
AS 2537-1994	Mechanical jointing fittings for use with cross-linked polyethylene (PE-X) pipe for hot and cold water applications
ATS 4747.2-2008	Meters for non-urban water supply Specification for closed conduit meters fully charged
AS/NZS 2845.1:1998	Water supply - Backflow prevention devices Materials, design and performance requirements
AS 3565.1-1994	Meters for cold potable water Volumetric chamber and turbine meters
AS 1210-1997	Pressure vessels
AS 1357.1-2009	Valves primarily for use in heated water systems Protection valves
ATS 4747.3-2008	Meters for non-urban water supply Specifications for open channel meters
AS 5263.0-2013	Gas appliances General requirements
AS/NZS 4129(Int):1997	Fittings for polyethylene (PE) pipes for pressure applications
AS 3578-1993	Cast iron non-return valves for general purposes
AS 1271-2003 (R2016)	Safety valves, other valves, liquid level gauges, and other fittings for boilers and unfired pressure vessels
AS 2469-2005 (R2016)	Steel cylinders for compressed gases - Welded two-piece construction - 0.1kg to 150kg
AS/NZS 3662:1996	Water supply - Water efficient mains pressure shower spray heads
AS 3565.3-2004	Meters for water supply Water meters with integral dual check valves
AS 2888.1-2002 (R2017)	Methods of testing plastics waste fittings Method of determining the suitability of connection threads of BSP form
AS 4557-2004	Domestic outdoor gas barbecues
AS/NZS 3112:2017	Approval and test specification - Plugs and socket-outlets
AS/NZS 4129:2008	Fittings for polyethylene (PE) pipes for pressure applications
AS 2941-1995	Fixed fire protection installations - Pumpset systems
AS/NZS 3718:1997	Water supply - Metal-bodied taps - Specified by performance
AS 1589-1994	Copper and copper alloy waste fittings
AS 3688-2005	Water supply - Metallic fittings and end connectors
AS 4397-1996	Electroplated coatings of zinc on steel fasteners with imperial threads
AS 1589-2001 (R2018)	Copper and copper alloy waste fittings
AS 2304-2011	Water storage tanks for fire protection systems
AS/NZS 3112:2004	Approval and test specification - Plugs and socket-outlets
AS 3495-1997 (R2018)	Authorization requirements for plumbing products - Stainless steel non-pressure pipes and fittings
AS/NZS 3112:2011	Approval and test specification - Plugs and socket-outlets
AS 2470-1998	Steel cylinders for compressed gases - Welded three-piece construction with longitudinal joint - 11 kg to 150 kg

Add To Cart

Product Format

Quantity

add to cart

AS 1722.2-1992 (R2017)

Abstract - (Show below) - (Hide below)

Scope - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

History - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?