• There are no items in your cart

AS 1817.1-2003

Current
Current

The latest, up-to-date edition.

Metallic materials - Vickers hardness test Test method (ISO 6507-1:1997, MOD)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

01-08-2003

Preview

Specifies the method for the Vickers hardness test for three ranges of test force for metallic materials. This Standard is an adoption with national modifications and is reproduced from ISO 6507-1:1997.

This part of ISO 6507 specifies the method of Vickers hardness test for the three different ranges of test force for metallic materials (see table 1).The Vickers hardness test is specified in this part of ISO 6507 for lengths of indentation diagonals between 0,020 mm and 1,400 mm.The force values in this part of ISO 6507 were calculated from kilogram force values. They wereintroduced before the SI-system was adopted. It was decided to keep the values based on the oldunits for this edition, but for the next revision it will be necessary to consider the advantage ofintroducing rounded values of test force and the consequence on the hardness scales.NOTE — In general, decreasing the test force increases the scatter of results of the measurements. This is particularly true for low-force Vickers hardness tests and Vickers microhardness tests where the principallimitation will arise in the measurement of the diagonals of the indentation. For Vickers microhardness, the accuracy of determination of the mean diagonal length is unlikely to be better than ± 0,001 mm (see annex E).For specific materials and/or products, particular International Standards exist.

Committee
MT-006
DocumentType
Standard
ISBN
0 7337 5012 5
Pages
110
ProductNote
Reconfirmed 31/03/2017.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 31/03/2017
PublisherName
Standards Australia
Status
Current
Supersedes

First published in part as AS B106-1954 (being endorsement of BS 427-1931 with amendments) Second edition AS B106-1957.Revised and redesignated AS B106.1-1962.AS B106.2 first published 1965.AS B106.1-1962 revised and redesignated AS 1817.1-1976.AS B106.2-1965 revised and redesignated AS 1817.2-1976.AS 1817.1-1976 and AS 1817.2-1976 revised, amalgamated and redesignated AS 1817-1991.AS 1817-1991 revised and redesignated in part as AS 1817.1-2003.Reconfirmed 2017. First published in part as AS B106-1954 (being endorsement of BS 427-1931 with amendments) Second edition AS B106-1957. Revised and redesignated AS B106.1-1962. AS B106.2 first published 1965. AS B106.1-1962 revised and redesignated AS 1817.1-1976. AS B106.2-1965 revised and redesignated AS 1817.2-1976. AS 1817.1-1976 and AS 1817.2-1976 revised, amalgamated and redesignated AS 1817-1991. AS 1817-1991 revised and redesignated in part as AS 1817.1-2003.

AS 1817.3-2002 Metallic materials - Vickers hardness test Calibration of reference blocks
AS 1817.2-2002 Metallic materials - Vickers hardness test Verification of testing machines

AS 1988.1-2006 Welding of ferrous castings - Steel castings
AS 4553-2008 Gas space heating appliances
AS/NZS 1554.1:2004 Structural steel welding Welding of steel structures
AS 2003-1991 Carbon and low alloy steel - Measurement of decarburization
AS 3527.3-1990 Hand-operated screwdrivers and screwdriver bits - Bits for manually driven and power-driven screwdrivers
AS 5047-2005 Hydraulic shoring and trench lining equipment
AS/NZS 1554.4:2004 Structural steel welding - Welding of high strength quenched and tempered steels
AS 1085.20-2006 Railway track material - Part 20: Welding of steel rail
AS/NZS 1554.7:2006 Structural steel welding Welding of sheet steel structures
AS/NZS 1554.5:2011 Structural steel welding Welding of steel structures subject to high levels of fatigue loading
AS 1770-2003 Steel - Hardenability test by end quench (Jominy test)
AS 2028-1977 Methods for the measurement of the depth of hardening in flame and induction hardened steel products
AS/NZS 1554.4:2010 Structural steel welding Welding of high strength quenched and tempered steels
AS 1559:2018 Hot-dip galvanized steel bolts and associated nuts and washers for tower construction
AS 1085.20-2012 Railway track material Welding of steel rail
AS/NZS 2885.2:2016 Pipelines - Gas and liquid petroleum - Welding
AS 2181.3-1981 Screwing taps - Inch series screw threads
AS/NZS 4645.2:2018 Gas distribution networks Steel pipe systems
AS 1816.2-2007 Metallic materials - Brinell hardness test Verification and calibration of testing machines
AS 5100.8:2017 Bridge design Rehabilitation and strengthening of existing bridges
AS 5054-2007 Ausferritic spheroidal graphite cast irons - Classification
AS 1444-2007 Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties (Reconfirmed 2017)
AS 1856-2004 Electroplated coatings - Silver
AS 2205.6.1-2003 Methods for destructive testing of welds in metal Weld joint hardness test
AS 3527.1-1988 Hand-operated screwdrivers and screwdriver bits - Screwdrivers for slotted and cross-recessed fasteners
AS 2528-1982 Bolts, studbolts and nuts for flanges and other high and low temperature applications
AS 1815.2-2007 Metallic materials - Rockwell hardness test Verification and calibration of testing machine (scales A, B, C, D, E, F, G, H, K, N, T)
AS 1815.2-2007 Metallic materials - Rockwell hardness test Verification and calibration of testing machine (scales A, B, C, D, E, F, G, H, K, N, T)
AS 2837-1986 Wrought alloy steels - Stainless steel bars and semi-finished products
AS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017)
AS/NZS 1554.5:2004 Structural steel welding Welding of steel structures subject to high levels of fatigue loading
AS 1473.8-2007 Wood processing machinery - Safety Finishing machinery - Milling tools and circular saw blades
AS 1432-2004 Copper tubes for plumbing, gasfitting and drainage applications
AS/NZS 1873.4:2003 Powder-actuated (PA) hand-held fastening tools - Fasteners
AS 1448-2007 Carbon steel and carbon-manganese steels - Forgings (ruling section 300 mm maximum)
AS 1817.2-2002 Metallic materials - Vickers hardness test Verification of testing machines
AS/NZS 1554.1:2011 Structural steel welding Welding of steel structures

View more information
US$152.72
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.