AS 1834.1-1991
Current
The latest, up-to-date edition.
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
05-13-1991
Specifies requirements for chemical composition and gives properties and typical applications for tin-lead and other tin-containing solder alloys.
This Standard specifies the chemical composition requirements for tin-lead and other tin-containing solder alloys supplied in the cast, wrought, paste, or powder form. It is not applicable to working solder baths which may be subject to other impurity requirements.NOTES:1 For the purpose of this Standard, 'wrought' includes ribbon, wire, rod and preforms.2 Advice and recommendations on information to be supplied by the purchaser at the time of enquiry and order are contained in Appendix A.3 Typical properties and uses of solders specified in this Standard are given in Appendix B.4 The contaminant limits for working solder baths used for the soldering of printed board assemblies are given in AS 3508.1.
| Committee |
MT/5
|
| DocumentType |
Standard
|
| ISBN |
0 7262 6834 8
|
| Pages |
6
|
| ProductNote |
Reconfirmed 14/09/2018.
This standard has been reconfirmed in Australia in 2018 and remains current in New Zealand. Reconfirmation Notice 14/09/2018 |
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
First published as AS H1-1931.
Revised and redesignated as part of AS 1834-1979.
Revised and redesignated in part as AS 1834.1-1986.
Second edition 1991.
Reconfirmed 2018.
First published as AS H1-1931. AS H1-1931 revised and redesignated as part of AS 1834-1979. AS 1834-1979 revised and redesignated in part as AS 1834.1-1986. Second edition 1991.
| AS 2292.2-1987 | Methods for the analysis of solders Determination of silver, bismuth, cadmium, copper antimony, iron and zinc - Flare, atomic absorption spectrometric method (Reconfirmed 2016) |
| AS 3508.1-1989 | Printed board assemblies - Preparation, handling and assembly |
| AS 2292.1-1979 | Methods for the analysis of solders Determination of tin (Volumetric Method) |
| AS 2534-1997 | Lead and lead alloys - Sampling for chemical and spectrochemical analysis |
| AS 1671.3-1987 | Lead alloys Determination of high concentrations of antimony in lead alloys containing not more than 2.5 percent arsenic and 1.0 percent copper - Titrimetric method (Reconfirmed 2016) |
| AS 1671.1-1987 | Lead alloys Determination of antimony content - Flame atomic absorption spectrometric method (Reconfirmed 2016) |
| AS 1671.2-1987 | Lead alloys Determination of low concentrations of antimony in lead alloys containing not more than 2.5 percent arsenic and 0.10 percent copper - titrimetric method (Reconfirmed 2016) |
| AS 1671.4-1988 | Lead and lead alloys Determination of tin in antimonial lead - Flame atomic absorption spectrometric method (Reconfirmed 2016) |
| AS/NZS 1747:2022 | Reeling, trailing and feeder cables used for mining - Repair, testing and fitting of accessories |
| AS 4647-2011 | Diaphragm gas meters |
| AS/NZS 3100:1997 | Approval and test specification - General requirements for electrical equipment |
| AS 2845.1-1995 | Water supply - Backflow prevention devices - Materials, design and performance requirements |
| AS 3517-2007 | Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications (Reconfirmed 2018) |
| AS 4363(INT)-1996 | Soldering electrical and electronic assemblies |
| AS 1357.1-2004 | Valves primarily for use in heated water systems - Protection valves |
| AS/NZS 2845.1:2010 | Water supply - Backflow prevention devices Materials, design and performance requirements |
| AS 5200.037.2-2008 | Plumbing and drainage products Flow controllers for use with heated or cold water systems (Reconfirmed 2016) |
| AS 4647-2005 | Domestic diaphragm gas meters |
| AS/NZS 3100:2017 | Approval and test specification - General requirements for electrical equipment |
| AS 3688-1994 | Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors |
| AS 3517-1995 | Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications |
| AS 4032.1-2005 | Water supply - Valves for the control of heated water supply temperatures Thermostatic mixing valves - Materials design and performance requirements |
| AS 3688:2016 | Water supply and gas systems - Metallic fittings and end connectors |
| AS 1718-1992 | Water supply - Copper alloy screw-down pattern taps - Specified by dimensions |
| AS 4032.2-2005 | Water supply - Valves for the control of hot water supply temperatures Tempering valves and end-of-line temperature-actuated devices (Reconfirmed 2015) |
| AS 3718-1992 | Water supply - Metal-bodied taps - Specified by performance |
| AS 1357.2-2005 | Valves primarily for use in heated water systems Control valves (Reconfirmed 2015) |
| AS 1628-1999 | Water supply - Metallic gate, globe and non-return valves |
| AS/NZS 3500.3:2003 | Plumbing and drainage Stormwater drainage |
| ATS 5200.014-2004 | Technical Specification for plumbing and drainage products - Jointing materials |
| AS 2118.9-1995 | Automatic fire sprinkler systems Piping support and installation (Reconfirmed 2013) |
| MP 52-1997 | Manual of authorization procedures for plumbing and drainage products |
| AS 1628-1994 | Water supply - Copper alloy gate, globe and non-return valves |
| AS 1910-1994 | Water supply - Float control valves for use in hot and cold water |
| AS 1747-1993 | Reeling, trailing and feeder cables used for mining - Repair and testing |
| AS/NZS 3718:2005 | Water supply - Tap ware (Reconfirmed 2016) |
| AS/NZS 3500.3:2018 | Plumbing and drainage Stormwater drainage |
| AS/NZS 3100:2002 | Approval and test specification - General requirements for electrical equipment |
| AS/NZS 3718:2003 | Water supply - Tap ware |
| AS 1910-2004 | Water supply - Float control valves for use in hot and cold water (Reconfirmed 2016) |
| AS 4032.4:2014 | Water supply - Valves for the control of heated water supply temperatures Thermostatically controlled taps for the control of heated water supply temperatures |
| AS 3100-1994 | Approval and test specification - General requirements for electrical equipment |
| AS/NZS 2845.1:1998 | Water supply - Backflow prevention devices Materials, design and performance requirements |
| AS/NZS 3100:2009 | Approval and test specification - General requirements for electrical equipment |
| AS 1834.2-1986 | Material for soldering Flux-cored solders (Reconfirmed 2018) |
| MP 52-2001 | Manual of authorization procedures for plumbing and drainage products |
| AS 1357.1-2009 | Valves primarily for use in heated water systems Protection valves |
| AS 5200.007-2008 | Plumbing and drainage products Metal-bodied water hammer arresters |
| AS 2118.1-2006 | Automatic fire sprinkler systems General systems |
| AS/NZS 1747:2003 | Reeling, trailing and feeder cables used for mining - Repair, testing and fitting of accessories (Reconfirmed 2020) |
| AS 4118.2.1-1995 | Fire sprinkler systems Piping - General (Reconfirmed 2013) |
| AS/NZS 3718:1997 | Water supply - Metal-bodied taps - Specified by performance |
| AS 3688-2005 | Water supply - Metallic fittings and end connectors |
| AS/NZS 3500.3:2015 | Plumbing and drainage Stormwater drainage |
| AS 4032-1992 | Thermostatic mixing valves - Materials, design and performance requirements |
| AS/NZS 3500.3.2:1998 | National plumbing and drainage Stormwater drainage - Acceptable solutions |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.