AS 2062-1997

Superseded View Superseded By

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Preview

Non-destructive testing - Penetrant testing of products and components

Publisher: Standards Australia

Published:

Available Formats: PDF 9 Users - English, PDF 5 Users - English, PDF 3 Users - English, PDF 1 User - English, Hardcopy - English
More Info on product formats

Abstract - (Show below) - (Hide below)

Specifies requirements and test procedures for visible dye and fluorescent penetrant testing of non-porous products and components for the detection of discontinuities that are open to the surface. Process control procedures and requirements for standard test panels are specified in appendices.

Scope - (Show below) - (Hide below)

This Standard specifies requirements for the penetrant testing of non-porous products and components for the detection of discontinuities that are open to the surface. It also specifies requirements for the materials used in penetrant testing, and requirements for process control.This Standard is intended for use in all situations where penetrant testing is used, including on-site testing and permanent factory installations.NOTES:1 Penetrant testing is usually applied to non-magnetic metallic materials but can be used on any material regardless of its physical properties, provided that its surface is non-absorbent and compatible with the process.2 Special requirements apply when penetrant-testing liquid oxygen system components.3 Advice and recommendations on information to be supplied by the purchaser at the time of enquiry and order are given in Appendix A.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Superseded
Publisher	Standards Australia
Pages
ISBN
Committee	MT-007
Under Revision	DR AS ISO 3452.6:2019 DR AS ISO 3452.2:2019 DR AS ISO 3452.4:2019 DR AS ISO 3452.1:2019 DR AS ISO 3452.5:2019 DR AS ISO 3452.3:2019
Supersedes	DR 95405 AS 2565-1982 AS 2062-1977
Superseded By	AS ISO 3452.6:2020 AS ISO 3452.2:2020 AS ISO 3452.4:2020 AS ISO 3452.1:2020 AS ISO 3452.3:2020 AS ISO 3452.5:2020

History - (Show below) - (Hide below)

First published in part as AS B260.3A-1968 (being endorsement of BS 3889.3A:1965 with Amendment).
AS B297 first published 1970.
AS B260.3A-1968 and AS B297-1970 revised, amalgamated and redesignated AS 2062-1977.
AS 2565 first published 1982.
AS 2062-1977 and AS 2565-1982 revised, amalgamated and designated AS 2062-1997.

Standards Referenced By This Book - (Show below) - (Hide below)

AS 3669-2006	Non-destructive testing - Qualification and approval of personnel - Aerospace
AS 1470-1986	Health and safety at work - Principles and practices
AS 3669-1989	Non-destructive testing - Qualification and registration of personnel - Aerospace
AS 3998-1992	Non-destructive testing - Qualification and certification of personnel - General engineering
JIS Z 2343:1992	Method For Liquid Penetrant Testing And Classification Of The Indication
AS 3998-2006	Non-destructive testing - Qualification and certification of personnel
AS 1627.4-1989	Metal finishing - Preparation and pretreatment of sufaces Abrasive blast cleaning
AS 1627.4-2005 (R2017)	Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel
AS 2193-2005 (R2017)	Calibration and classification of force-measuring systems
AS 1929-1981	Non-destructive testing - Glossary of terms
AS 1449-1994	Wrought alloy steels - Stainless and heat-resisting steel plate, sheet and strip
AS 2193-1978	Methods for calibration and grading of force-measuring systems of testing machines

Standards Referencing This Book - (Show below) - (Hide below)

AS 1796-2001 (R2016)	Certification of welders and welding supervisors
AS 4544.1-1999	Non-destructive testing - Eddy current testing for the detection of surface flaws In non-ferromagnetic metallic products
AS 3954.2-1991 (R2014)	Motor vehicle controls - Adaptive systems for people with disabilities Hand controls - Product requirements
AS 5100.8:2017	Bridge design Rehabilitation and strengthening of existing bridges
AS 2837-1986	Wrought alloy steels - Stainless steel bars and semi-finished products
AS/NZS 3992:1998	Pressure equipment - Welding and brazing qualification
AS 2885.2-2007	Pipelines - Gas and liquid petroleum Welding
AS 2938-1993	Gears - Spur and helical - Guide to specification and rating
AS 4738.1-2007	Metal castings Ferrous sand moulded
AS 4544-2005	Non-destructive testing - Eddy current testing for the detection of surface flaws - Ferromagnetic and non-ferromagnetic metallic products
AS 2885.2-1995	Pipelines - Gas and liquid petroleum Welding
AS/NZS 3788:2006 (R2017)	Pressure equipment - In-service inspection
AS 4037-1992	Boilers and pressure vessels - Examination and testing
AS 4722-2009	Passenger ropeways and passenger conveyors
AS/NZS 3788:2001	Pressure equipment - In-service inspection
AS 3954:2019	Motor vehicle driver controls - Adaptive systems for people with disabilities
AS/NZS 1554.1:2000	Structural steel welding Welding of steel structures
AS/NZS 1554.1:2011	Structural steel welding Welding of steel structures
AS 1796-1993	Certification of welders and welding supervisors
AS 3978-2003	Non-destructive testing - Visual inspection of metal products and components
AS 1447-2007 (R2017)	Hot-rolled spring steels
AS 1443-1994	Carbon steels and carbon-manganese steels - Cold-finished bars
AS/NZS 3788:1996	Pressure equipment - In-service inspection
AS/NZS 1554.6:2012	Structural steel welding Welding stainless steels for structural purposes
AS EN 12079.1-2010	Offshore containers and associated lifting sets Offshore containers - Design, manufacture and marking (EN 12079-1:2006, MOD)
AS 3533.3-2003 (R2013)	Amusement rides and devices In-service inspection
AS 1988.1-2006	Welding of ferrous castings Steel castings
AS 1554.1-1991	Structural steel welding (known as the SAA Structural Steel Welding Code) Welding of steel structures
AS 2741-2002 (R2014)	Shackles
AS EN 12079.3-2010	Offshore containers and associated lifting sets Periodic inspection, examination and testing (EN 12079-3:2006, MOD)
AS/NZS 2885.2:2016	Pipelines - Gas and liquid petroleum Welding
AS 3776-2006	Lifting components for Grade T chain slings
AS 3992-1992	Boilers and pressure vessels - Welding and brazing qualification
AS 1874-2000 (R2018)	Aluminium and aluminium alloys - Ingots and castings
AS/NZS 1554.4:2010	Structural steel welding Welding of high strength quenched and tempered steels
AS/NZS 3679.2:2016	Structural steel Welded I sections
AS 3679.2-1991	Structural steel Welded sections
AS/NZS 1554.4:2004	Structural steel welding Welding of high strength quenched and tempered steels
AS/NZS 1554.3:2002	Structural steel welding Welding of reinforcing steel
AS/NZS 3679.2:2010	Structural steel Welded I sections
AS 4041-1992	Pressure piping
AS 1448-2007	Carbon steel and carbon-manganese steels - Forgings (ruling section 300 mm maximum)
AS 1565-1996	Copper and copper alloys - Ingots and castings
AS 3777-2008 (R2019)	Shank hooks and large eye hooks - Maximum 60 t
AS/NZS 1554.6:1994	Structural steel welding Welding stainless steels for structural purposes
AS/NZS 1554.7:2006	Structural steel welding Welding of sheet steel structures
AS/NZS 1554.3:2008	Structural steel welding Welding of reinforcing steel
AS/NZS 5131:2016	Structural steelwork - Fabrication and erection
AS 1447-1991	Hot-rolled spring steels
AS/NZS 1554.1:2004	Structural steel welding Welding of steel structures
AS 4738.1-2004	Metal castings Ferrous sand moulded
AS/NZS 3679.2:1996	Structural steel Welded I sections
AS 2885.2-2002	Pipelines - Gas and liquid petroleum Welding
AS 4795.2-2011	Butterfly valves for waterworks purposes Double flanged
AS/NZS 1554.4:1995	Structural steel welding Welding of high strength quenched and tempered steels
AS/NZS 1554.1:1995	Structural steel welding Welding of steel structures
AS/NZS 2980:2007	Qualification of welders for fusion welding of steels
AS/NZS 3679.1:1996	Structural steel Hot-rolled bars and sections
AS 4037-1999 (R2016)	Pressure equipment - Examination and testing
AS 2337.2-2004 (R2016)	Gas cylinder test stations LP Gas fuel vessels for automotive use
AS/NZS 3679.1:2016	Structural steel Hot-rolled bars and sections
AS 3978-1991	Non-destructive testing - Visual inspection of metal products and components
AS/NZS 2980:2018	Qualification of welders for fusion welding of steels - Additional requirements for Australia and New Zealand
AS 1443-2004	Carbon and carbon-manganese steel - Cold-finished bars

Add To Cart

Product Format

Quantity

add to cart

AS 2062-1997

Abstract - (Show below) - (Hide below)

Scope - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

History - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?