1 - AS 2439 Part 1-1981 PERFORATED PLASTICS DRAINAGE AND EFFLUENT PIPE AND FITTINGS - PERFORATED DRAINAGE PIPE AND ASSOCIATED FIT
4 - PREFACE
5 - CONTENTS
6 - 1 SCOPE.
6 - 2 TYPES AND CLASSIFICATION.
6 - 2.1 Types.
6 - 2.2. Classification.
6 - 3 MATERIAL.
6 - 4 FREEDOM FROM DEFECTS.
6 - 5 DIMENSIONS.
6 - 5.1 Diameter.
6 - 5.2 Length.
7 - 5.3 Wall Thickness.
7 - 6 PERFORATIONS.
7 - 6.1 Type 1 Pipe.
7 - 6.2 Type 2 Pipe.
7 - 7 FITTINGS.
7 - 8 PACKAGING.
7 - 9 CONDITIONING OF TEST SPECIMENS.
7 - 10 PERFORMANCE REQUIREMENTS.
7 - 10.1 Bending.
7 - 10.2 Straightening.
7 - 10.3 High Temperature Impact Resistance.
7 - 10.4 Low Temperature Impact Resistance.
7 - 10.5 Elongation.
7 - 10.6 Pipe Stiffness.
7 - 10.7 Perforation Deformation.
7 - 10.8 Joint Separation.
7 - 11 MARKING.
7 - 11.1 Type 1 Pipe.
8 - 11.2 Type 2 Pipe.
9 - APPENDIX A - DETERMINATION OF COMPLIANCE OF A LOT
9 - A1 AUSTRALIAN STANDARDS MARK.
9 - A2 ASSESSMENT OF COMPLIANCE ON THE BASIS OF STATISTICAL SAMPLING
9 - A3 ASSURANCE OF COMPLIANCE ON THE BASIS OF SUPPLIERS’ QUALITY CONTROL SYSTEMS
10 - APPENDIX B - MEASUREMENT OF DIMENSIONS
10 - B1 SCOPE.
10 - B2 APPARATUS.
10 - B3 PREPARATION OF TEST SPECIMENS.
10 - B3.1 Diameter- Outside and Inside.
10 - B3.2 Length.
10 - B3.3 Perforations.
10 - B4 TEST PROCEDURES.
11 - B5 REPORT.
11 - B5.1 Outside Diameter.
11 - B5.2 Inside Diameter.
11 - B5.3 Length.
11 - B5.4 Perforations.
12 - APPENDIX C - BENDING TEST (TYPE 1 ONLY)
12 - C1 SCOPE.
12 - C2 PRINCIPLE.
12 - C3 APPARATUS.
12 - C4 PREPARATION OF TEST SPECIMENS.
12 - C5 TEST PROCEDURE.
12 - C6 REPORT.
13 - APPENDIX D - STRAIGHTENING TEST AT 0°C (TYPE1ONLY)
13 - D1 SCOPE.
13 - D2 PRINCIPLE.
13 - D3 APPARATUS.
13 - D4 PREPARATION OF TEST SPECIMENS.
13 - D5 TEST PROCEDURE.
13 - D6 REPORT.
14 - APPENDIX E - HIGH TEMPERATURE IMPACT RESISTANCE
14 - E1 SCOPE.
14 - E2 PRINCIPLE.
14 - E3 APPARATUS.
14 - E4 PREPARATION OF TEST SPECIMENS.
14 - E5 TEST PROCEDURE.
14 - E6 REPORT.
15 - APPENDIX F - LOW TEMPERATURE IMPACT RESISTANCE
15 - F1 SCOPE.
15 - F2 PRINCIPLE.
15 - F3 APPARATUS.
15 - F4 PREPARATION OF TEST SPECIMENS.
15 - F5 TEST PROCEDURE.
15 - F6 REPORT.
16 - APPENDIX G - ELONGATION AND PERFORATION DEFORMATION (Type 1 Only)
16 - G1 SCOPE.
16 - G2 PRINCIPLE.
16 - G3 APPARATUS.
16 - G4 PREPARATION OF TEST SPECIMENS.
16 - G5 TEST PROCEDURE.
16 - G6 CALCULATION.
16 - G7 REPORT.
16 - G7.1 Pipe Elongation.
16 - G7.2 Perforation Deformation.
17 - APPENDIX H - PIPE STIFFNESS AND PERFORATION DEFORMATION
17 - H1 SCOPE.
17 - H2 PRINCIPLE.
17 - H3 APPARATUS.
17 - H4 PREPARATION OF TEST SPECIMENS.
17 - H5 TEST PROCEDURE.
18 - H6 CALCULATIONS.
18 - H7 REPORT.
18 - H7.1 Pipe Stiffness.
18 - H7.2 Perforation Deformation (Type 2 only).
18 - APPENDIX J - JOINT SEPARATION (Type 1 Only)
18 - J1 SCOPE.
18 - J2 PRINCIPLE.
18 - J3 APPARATUS.
18 - J4 PREPARATION OF TEST SPECIMEN.
18 - J5 TEST PROCEDURE.
18 - J6 REPORT.