1 - AS 4118.1.4:1994 FIRE SPRINKLER SYSTEMS - COMPONENTS - VALVE MONITORS
4 - PREFACE
5 - CONTENTS
6 - SECTION 1 - SCOPE AND GENERAL
6 - 1.1 SCOPE
6 - 1.2 REFERENCED DOCUMENTS
7 - 1.3 DEFINITIONS
7 - 1.3.1 Alarm initiation-
7 - 1.3.2 Supervisory equipment (SE)-
7 - 1.3.3 Stop valve-
7 - 1. 3.4 Transmit an alarm-
7 - 1.3.5 Valve operating mechanism-
7 - 1.3.6 Watching station-
8 - SECTION 2 - MATERIAL AND DESIGN REQUIREMENTS
8 - 2.1 SCOPE OF SECTION
8 - 2.2 DESIGN AND CONSTRUCTION
8 - 2.3 MATERIALS AND COMPONENTS
9 - 2.4 CONNECTING FACILITIES
9 - 2.5 INTERNAL WIRING
9 - 2.6 CONTACTS
9 - 2.7 CONNECTION OF MULTIPLE MONITORS
10 - SECTION 3 - PERFORMANCE REQUIREMENTS
10 - 3.1 SCOPE OF SECTION
10 - 3.2 TAMPER RESISTANCE REQUIREMENTS
10 - 3.2.1 Tamper resistance
10 - 3.2.2 Integrity of signalling path
10 - 3.2.3 Subversion by physical damage
10 - 3.3 NORMAL OPERATION
10 - 3.4 ELECTRICAL REQUIREMENTS
10 - 3.4.1 Voltage stability
10 - 3.4.2 Insulation resistance
10 - 3.4.3 Static discharge
10 - 3.4.4 Electromagnetic interference
10 - 3.4.5 Impulse voltage withstand
10 - 3.4.6 High frequency disturbance
10 - 3.5 ENVIRONMENTAL REQUIREMENTS
10 - 3.5.1 Low temperature
10 - 3.5.2 Damp heat
11 - 3.5.3 Dry heat
11 - 3.5.4 Corrosion
11 - 3.5.5 Salt mist
11 - 3.5.6 Dust
11 - 3.6 VIBRATION, IMPACT AND ENDURANCE REQUIREMENTS
11 - 3.6.1 Vibration
11 - 3.6.2 Impact
11 - 3.6.3 Endurance requirement
12 - SECTION 4 - PRODUCT MARKING AND INFORMATION
12 - 4.1 SCOPE OF SECTION
12 - 4.2 MARKING
12 - 4.3 INFORMATION
12 - 4.4 POINT OF SALE INFORMATION
13 - SECTION 5 - ASSESSMENT FOR COMPLIANCE
13 - 5.1 SCOPE OF SECTION
13 - 5.2 TEST SCHEDULE AND CRITERIA OF ACCEPTANCE
13 - 5.3 REPORTING
15 - APPENDIX A - TAMPER RESISTANCE EVALUATION
15 - A1 SCOPE
15 - A2 PRINCIPLE
15 - A3 APPARATUS
15 - A4 PROCEDURE
15 - A5 REQUIREMENTS
16 - APPENDIX B - NORMAL OPERATION TEST
16 - B1 SCOPE
16 - B2 PRINCIPLE
16 - B3 APPARATUS
16 - B4 PROCEDURE
16 - B5 REQUIREMENTS
17 - APPENDIX C - ENDURANCE TEST
17 - C1 SCOPE
17 - C2 PRINCIPLE
17 - C3 APPARATUS
17 - C4 PROCEDURE

Specifies the requirements for establishing compliance with limits of design, performance, security and durability for sprinkler and hydrant valve monitors.

This Standard specifies the requirements for valve monitors for mounting on stop valves for automatic fire prinkler systems, designed and installed in compliance with AS 2118, and fire hydrant systems designed and installed in compliance with AS 2419, to monitor the set position of the valves. If the state of a valve is changed or an attempt is made to subvert the operation of the monitor it will initiate an alarm signal.NOTE: The alarm signal is generally initiated and then transmitted via the supervisory equipment to a fire control station or a monitoring station.

First published as AS 4118.1.4-1994.Reconfirmed 2013. First published as AS 4118.1.4-1994.