• There are no items in your cart

AS/NZS 1125:2001

Current
Current

The latest, up-to-date edition.

Conductors in insulated electric cables and flexible cords (Reconfirmed 2017)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

06-29-2001

Preview

Specifies the requirements for conductors in insulated electric cables and flexible cords used for general wiring cables for land installations and, in the case of copper conductors only, for ships' wiring. The Standard does not apply to material used for the manufacture of conductors.

This Standard specifies requirements for conductors in insulated electric cables and flexible cords used for general wiring cables for land installations and, in the case of copper conductors only, for ships' wiring.This Standard applies particularly to conductors for those types of cable and flexible cord to which the relevant Australian or Australian/New Zealand Standard makes cross-reference. This Standard is not necessarily limited to conductors of such cables and cords and should be applied, wherever practicable, to cables designed for general and special purposes. The conductors specified here do not apply to the following:(a) Magnet winding wire including litz wire (see AS/NZS 1194.1).(b) Mineral-insulated metal-sheathed (MIMS) cables (see AS/NZS 3187).(c) Cables intended for use at audio or higher frequencies, e.g. telecommunication cables.(d) Welding cables (see AS/NZS 1995).NOTE: The method of calculation used to establish the conductor maximum d.c. resistance values is given in Appendix A.

Committee
EL-003
DocumentType
Standard
ISBN
0 7337 3957 1
Pages
20
ProductNote
Reconfirmed 20/01/2017.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 20/01/2017
PublisherName
Standards Australia
Status
Current
Supersedes
UnderRevision

First published as AS C324-1960 (being BS 2791:1956 endorsed with amendment).Second edition 1969 (being BS 2791-1986 endorsed with amendment).AS C407 first published 1969 (being BS 2627-1961 endorsed without amendment).AS C324-1969 and AS C407-1969 revised, amalgamated and redesignated AS 1125-1974.Second edition 1986.Third edition 1993.Jointly revised and designated AS/NZS 1125:2001.Reconfirmed 2017. Originated as part of AS C324-1960 and AS C407-1969. Previous edition AS 1125-1993. Jointly revised and designated AS/NZS 1125:2001. Reissued incorporating Amendment No. 1 (August 2004).

AS/NZS 1660.2.5:1998 Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to cables above 1 kV (Reconfirmed 2017)
AS/NZS 1660.4:1998 Test methods for electric cables, cords and conductors Complete cable and flexible cord (Reconfirmed 2017)
AS/NZS 3000:2000 Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 1660.3:1998 Test methods for electric cables, cords and conductors Electrical tests (Reconfirmed 2017)
AS/NZS 1660.5.4:1998 Test methods for electric cables, cords and conductors - Fire tests - Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity
AS/NZS 1660.5.1:1998 Test methods for electric cables, cords and conductors Fire tests - Tests on bunched cables
AS/NZS 1194.1:1996 Winding wires Enamelled round copper winding wires
AS 2848.1-1998 Aluminium and aluminium alloys - Compositions and designations Wrought products (Reconfirmed 2018)
AS/NZS 1995:2003 Welding cables (Reconfirmed 2017)
AS/NZS 1660.5.2:1998 Test methods for electric cables, cords and conductors Fire tests - Smoke density
AS/NZS 1660.2.1:1998 Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods for general application (Reconfirmed 2017)
AS/NZS 1574:1996 Copper and copper alloys - Wire for electrical purposes (Reconfirmed 2020)
AS/NZS 1660.2.2:1998 Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to elastomeric, XLPE and XLPVC materials (Reconfirmed 2017)
AS/NZS 1660.1:1998 Test methods for electric cables, cords and conductors Conductors and metallic components (Reconfirmed 2017)
AS/NZS 3187:1995 Approval and test specification - Mineral-insulated metal-sheathed cables
AS/NZS 1660.5.6:1998 Test methods for electric cables, cords and conductors Fire tests - Test for combustion propagation
AS/NZS 1660.2.3:1998 Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to PVC and halogen free thermoplastic materials (Reconfirmed 2017)
AS/NZS 1660.5.3:1998 Test methods for electric cables, cords and conductors Fire tests - Determination of the amount of halogen acid gas evolved during the combustion of polymeric materials taken from cables
AS/NZS 1660.2.4:1998 Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to polyethylene and polypropylene materials (Reconfirmed 2017)
AS/NZS 1660.5.5:1998 Test methods for electric cables, cords and conductors Fire tests - Circuit integrity under fire conditions
AS/NZS 1995:1995 Welding cables

AS/NZS 3599.2:1999 Electric cables - Aerial bundled - Polymeric insulated - Voltages 6.35/11(12) kV and 12.7/22(24) kV Non-metallic screened
AS/NZS 2276.3:2002 Cables for traffic signal installations Loop cable for vehicle detectors (Reconfirmed 2017)
AS/NZS 3003:2018 Electrical installations - Patient areas
AS 2239-2003 Galvanic (sacrificial) anodes for cathodic protection
AS/NZS 5000.1:2005 Electric cables - Polymeric insulated For working voltages up to and including 0.6/1 (1.2) kV (Reconfirmed 2017)
AS/NZS 3100:2017 Approval and test specification - General requirements for electrical equipment
AS/NZS 5000.3:2003 Electric cables - Polymeric insulated Multicore control cables (Reconfirmed 2017)
AS/NZS 2373:2003 Electric cables - Twisted pair for control and protection circuits (Reconfirmed 2017)
AS/NZS 5000.2:2006 Electric cables - Polymeric insulated For working voltages up to and including 450/750 V (Reconfirmed 2017)
AS/NZS 1429.1:2006 Electric cables - Polymeric insulated For working voltages 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV
AS/NZS 1995:2003 Welding cables (Reconfirmed 2017)
AS/NZS 4026:2001 Electric cables - For underground residential distribution systems
AS/NZS 3191:2008 Electric flexible cords (Reconfirmed 2019)
AS/NZS 2802:2000 Electric cables - Reeling and trailing - For mining and general use (other than underground coal mining) (Reconfirmed 2020)
AS/NZS 3004.2:2008 Electrical installations - Marinas and recreational boats Recreational boats installations
AS/NZS 1972:2006 Electric cables - Underground coal mines - Other than reeling and trailing (Reconfirmed 2020)
AS/NZS 3017:2007 Electrical installations - Verification guidelines
AS/NZS 3008.1.1:2017 Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions
AS/NZS 3003:2003 Electrical installations - Patient treatment areas of hospitals and medical, dental practices and dialyzing locations
AS/NZS 3003:2011 Electrical installations - Patient areas
AS/NZS 3155:1995 Approval and test specification - Electric cables - Neutral screened - For working voltages up to and including 0.6/1 kV
AS/NZS 1802:2003 Electric cables - Reeling and trailing - For underground coal mining purposes
AS/NZS 4961:2003 Electric cables - Polymeric insulated - For distribution and service applications (Reconfirmed 2017)
AS/NZS 3191:2003 Electric flexible cords
AS/NZS 3008.1.2:2010 Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand conditions
AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 3166:1993 Approval and test specification - Cables for high voltage luminous discharge tube installations (Reconfirmed 2017)
AS 3158-2004 Electric cables - Glass fibre insulated - For working voltages up to and including 0.6/1 (1.2) kV (Reconfirmed 2016)
AS/NZS 4509.1:2009 Stand-alone power systems Safety and installation (Reconfirmed 2017)
AS/NZS 1802:2018 Electric cables - Reeling and trailing - For underground coal mining
AS/NZS 1026:2004 Electric cables - Impregnated paper insulated - For working voltages up to and including 19/33 (36) kV
AS/NZS 3013:2005 Electrical installations - Classification of the fire and mechanical performance of wiring system elements (Reconfirmed 2020)
AS/NZS 1972:2002 Electric cables - Underground coal mines - Other than reeling and trailing
AS/NZS 3100:2002 Approval and test specification - General requirements for electrical equipment
AS/NZS 2201.1:2007 Intruder alarm systems Client’s premises - Design, installation, commissioning and maintenance
AS/NZS 2276.2:1998 Cables for traffic signal installations Feeder cable for vehicle detectors
AS/NZS 4325.1:1995 Compression and mechanical connectors for power cables with copper or aluminium conductors Test methods and requirements (Reconfirmed 2016)
AS/NZS 3100:2009 Approval and test specification - General requirements for electrical equipment
AS/NZS 3008.1.1:2009 Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions
AS/NZS 3560.2:2003 Electric cables - Cross-linked polyethylene insulated - Aerial bundled - For working voltages up to and including 0.6/1 (1.2) kV Copper conductors
AS/NZS 1429.2:2009 Electric cables - Polymeric insulated For working voltages above 19/33 (36) kV up to and including 87/150 (170) kV (Reconfirmed 2020)
AS/NZS 3008.1.2:2017 Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand conditions
AS/NZS 5000.1:2003 Electric cables - Polymeric insulated For working voltages up to and including 0.6/1 (1.2) kV
AS/NZS 3017:2001 Electrical installations - Testing and inspection guidelines
AS/NZS 1747:2003 Reeling, trailing and feeder cables used for mining - Repair, testing and fitting of accessories (Reconfirmed 2020)
AS 1076.1-1977 Code of practice for the selection, installation and maintenance of electrical apparatus and associated equipment for use in explosive atmospheres (other than mining applications) Basic requirements
AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 3599.1:2003 Electric cables - Aerial bundled - Polymeric insulated - Voltages 6.35/11 (12) kV and 12.7/22 (24) kV Metallic screened (Reconfirmed 2021)
AS/NZS 2276.1:2004 Cables for traffic signal installations Multicore power cables (Reconfirmed 2017)

View more information
US$69.34
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.