AS/NZS 1580.205.2:1997
Current
The latest, up-to-date edition.
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
12-05-1997
This Standard sets out a procedure for determining the suitability of a paint for application by conventional spraying. It provides for the assessment of defects observed during and after application of the paint.
This Standard sets out a procedure for determining the suitability of a paint for application by conventional spraying. It provides for the assessment of defects observed during and after application of the paint.
Committee |
CH-003
|
DocumentType |
Standard
|
ISBN |
0 7337 1615 6
|
Pages |
3
|
ProductNote | |
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
First published in Australia as AS K41.205.2-1959.Second edition 1969.Revised and redesignated AS 1580.205.2-1975.Jointly revised and designated AS/NZS 1580.205.2:1997.Reconfirmed 2013. Originated in Australia as AS K41.205.2-1959. Previous Australian edition AS 1580.205.2-1981. Jointly revised and designated AS/NZS 1580.205.2:1997.
AS 1580.101.4-1986 | Paints and related materials - Methods of test Conditions of test, temperature controlled |
AS 1580.107.3-1980 | Paints and related materials - Methods of test Determination of wet film thickness by wheel gauge |
AS 1580.603.1-1992 | Paints and related materials - Methods of test Finish |
AS 1580.102.1-2002 | Paints and related materials - Methods of test Sampling procedure |
AS 1580.603.1-2002 | Paints and related materials - Methods of test Finish - General appearance (Reconfirmed 2013) |
AS/NZS 1580.107.3:1997 | Paints and related materials - Methods of test Determination of wet film thickness by gauge (Reconfirmed 2013) |
AS 1580.102.1-1992 | Paints and related materials - Methods of test Sampling procedure |
AS/NZS 1580.103.1:1995 | Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013) |
AS/NZS 1580.101.4:1999 | Paints and related materials - Methods of test Conditions of test - Temperature control (Reconfirmed 2013) |
AS 3730.29-2006 | Guide to the properties of paints for buildings Solvent-borne - Exterior/interior - Paving paint (Reconfirmed 2016) |
AS 3730.21-2006 | Guide to the properties of paints for buildings Primer - Solvent-borne - For ferrous metallic surfaces |
AS 3750.18-2002 | Paints for steel structures Moisture cure urethane (single-pack) systems |
AS/NZS 3750.8:1994 | Paints for steel structures Vinyl paints - Primer, high-build and gloss (Reconfirmed 2013) |
AS 3730.3-2006 | Guide to the properties of paints for buildings Latex - Interior - Low gloss (Reconfirmed 2016) |
AS/NZS 3750.9:1994 | Paints for steel structures - Organic zinc-rich primer |
AS 3730.2-2006 | Guide to the properties of paints for buildings Latex - Interior - Semi-gloss (Reconfirmed 2016) |
AS 4025.2-1993 | Paints for equipment including ships Solvent-borne - Interior and exterior - Undercoat |
AS 3730.9-2006 | Guide to the properties of paints for buildings Latex - Exterior - Semi-gloss |
AS/NZS 3750.11:2009 | Paints for steel structures Chlorinated rubber - High-build and gloss |
AS 3730.5-2006 | Guide to the properties of paints forbuildings Solvent-borne - Interior - Semi-gloss (Reconfirmed 2016) |
AS 3730.7-2006 | Guide to the properties of paints for buildings Latex - Exterior - Flat |
AS 3730.11-1991 | Guide to the properties of paints for buildings Solvent-borne - Interior - Full gloss enamel |
AS/NZS 3750.23:2008 | Paints for steel structures Semi-gloss enamel - Solvent-borne (Reconfirmed 2021) |
AS/NZS 3750.7:2009 | Paints for steel structures Aluminium paint (Reconfirmed 2021) |
AS 3730.15-2006 | Guide to the properties of paints for buildings Primer - Latex - For metallic zinc surfaces |
AS/NZS 3750.22:2008 | Paints for steel structures Full gloss enamel - Solvent-borne (Reconfirmed 2021) |
AS/NZS 3750.6:2009 | Paints for steel structures Full gloss polyurethane (two-pack) (Reconfirmed 2020) |
AS 4025.3-1993 | Paints for equipment including ships Solvent-borne - Interior and exterior - Semi-gloss enamel |
AS 2331.1.1-2001 | Methods of test for metallic and related coatings Local thickness tests - Micrographic examination of cross-sections |
AS/NZS 3750.11:1996 | Paints for steel structures - Chlorinated rubber - High-build and gloss |
AS 3730.25-2006 | Guide to the properties of paints for buildings Clear finish - Solvent-borne - Interior (Reconfirmed 2016) |
AS/NZS 3750.9:2009 | Paints for steel structures Organic zinc-rich primer (Reconfirmed 2019) |
AS/NZS 3750.4:1994 | Paints for steel structures Bitumen paint (Reconfirmed 2013) |
AS 3730.6-2006 | Guide to the properties of paints for buildings Solvent-borne - Interior/exterior - Full gloss enamel (Reconfirmed 2016) |
AS 3730.16-2006 | Guide to the properties of paints for buildings Latex - Self-priming timber finish - Exterior |
AS/NZS 3750.3:2008 | Paints for steel structures Heat resisting - Exterior (Reconfirmed 2020) |
AS/NZS 3750.3:1994 | Paints for steel structures - Heat resisting - Exterior |
AS 3730.14-2006 | Guide to the properties of paints for buildings Undercoat - Solvent-borne - Interior/exterior |
AS 4049.3-2005 | Paints and related materials - Pavement marking materials Waterborne paint - For use with surface applied glass beads (Reconfirmed 2016) |
AS 4025.1-1992 | Paints for equipment including ships Solvent-borne - Interior and exterior - Full gloss enamel |
AS 3750.10-2008 | Paints for steel structures Full gloss epoxy (two-pack) (Reconfirmed 2019) |
AS 3730.18-2006 | Guide to the properties of paints for buildings Undercoat/sealer - Latex - Interior/exterior |
AS/NZS 3750.12:1996 | Paints for steel structures Alkyd/micaceous iron oxide (Reconfirmed 2013) |
AS 3730.12-2006 | Guide to the properties of paints for buildings Latex - Interior - Gloss |
AS/NZS 3750.1:2008 | Paints for steel structures Epoxy mastic (two-pack) - For rusted steel (Reconfirmed 2020) |
AS 3730.1-2006 | Guide to the properties of paints for buildings Latex - Interior - Flat (Reconfirmed 2016) |
AS/NZS 3750.5:2008 | Paints for steel structures Acrylic full gloss (two-pack) (Reconfirmed 2020) |
AS/NZS 3750.16:1998 | Paints for steel structures Waterborne primer and paint for galvanized, zinc/aluminium alloy-coated and zinc-primed steel (Reconfirmed 2013) |
AS 1580.409.3-2002 | Paints and related materials - Methods of test Blocking resistance of latex paint finishes (Reconfirmed 2013) |
AS/NZS 3750.7:1994 | Paints for steel structures - Aluminium paint |
AS/NZS 3750.20:2008 | Paints for steel structures Anticorrosive metal primer - Solvent-borne - Lead and chromate free (Reconfirmed 2020) |
AS 3750.1-1994 | Paints for steel structures - Epoxy mastic (two-pack) - For rusted steel |
AS/NZS 3750.21:2008 | Paints for steel structures Undercoat - Solvent-borne (Reconfirmed 2021) |
AS 3730.10-2006 | Guide to the properties of paints for buildings Latex - Exterior - Gloss (Reconfirmed 2016) |
AS 3730.8-2006 | Guide to the properties of paints for buildings Latex - Exterior - Low-gloss (Reconfirmed 2016) |
AS/NZS 4049.3:1996 | Paints and related materials - Road marking materials - Waterborne paint - For use with drop-on beads |
AS 4049.1-2005 | Paints and related materials - Pavement marking materials Solvent-borne paint - For use with surface applied glass beads (Reconfirmed 2016) |
AS/NZS 3750.5:1994 | Paints for steel structures - Acrylic full gloss (two-pack) |
AS/NZS 3750.10:1994 | Paints for steel structures Full gloss epoxy (two-pack) |
AS/NZS 3750.19:2008 | Paints for steel structures Metal primer - General purpose (Reconfirmed 2020) |
AS 4089-1993 | Priming paint for steel - Single component - General purpose |
AS 3730.0-2006 | Guide to the properties of paints for buildings General information on the specification, purchasing and testing of paints |
AS 4025.4-1994 | Paints for equipment including ships Solvent-borne - Lead and chromate free - Anticorrosive metal primer |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.